[PATCH v9 5/6] drm/meson: overlay: setup overlay for Amlogic FBC Scatter Memory layout

Neil Armstrong narmstrong at baylibre.com
Fri Jul 3 04:07:27 EDT 2020


Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
read the FBC header as Scatter Memory layout reference.

Tested-by: Kevin Hilman <khilman at baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Reviewed-by: Kevin Hilman <khilman at baylibre.com>
---
 drivers/gpu/drm/meson/meson_overlay.c | 53 ++++++++++++++++++---------
 1 file changed, 35 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c
index 1566a887d482..1f7b2055e012 100644
--- a/drivers/gpu/drm/meson/meson_overlay.c
+++ b/drivers/gpu/drm/meson/meson_overlay.c
@@ -490,6 +490,10 @@ static void meson_overlay_atomic_update(struct drm_plane *plane,
 						AMLOGIC_FBC_OPTION_MEM_SAVING))
 			priv->viu.vd1_afbc_mode |= AFBC_BLK_MEM_MODE;
 
+		if ((fb->modifier & __fourcc_mod_amlogic_layout_mask) ==
+				AMLOGIC_FBC_LAYOUT_SCATTER)
+			priv->viu.vd1_afbc_mode |= AFBC_SCATTER_MODE;
+
 		priv->viu.vd1_afbc_en = 0x1600 | AFBC_DEC_ENABLE;
 
 		priv->viu.vd1_afbc_conv_ctrl = AFBC_CONV_LBUF_LEN(256);
@@ -675,23 +679,32 @@ static void meson_overlay_atomic_update(struct drm_plane *plane,
 	}
 
 	if (priv->viu.vd1_afbc) {
-		/* Default mode is 4k per superblock */
-		unsigned long block_size = 4096;
-		unsigned long body_size;
-
-		/* 8bit mem saving mode is 3072bytes per superblock */
-		if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE)
-			block_size = 3072;
-
-		body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) *
-			    (ALIGN(priv->viu.vd1_height0, 32) / 32) *
-			    block_size;
-
-		priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4;
-
-		/* Header is after body content */
-		priv->viu.vd1_afbc_head_addr = (priv->viu.vd1_addr0 +
-						body_size) >> 4;
+		if (priv->viu.vd1_afbc_mode & AFBC_SCATTER_MODE) {
+			/*
+			 * In Scatter mode, the header contains the physical
+			 * body content layout, thus the body content
+			 * size isn't needed.
+			 */
+			priv->viu.vd1_afbc_head_addr = priv->viu.vd1_addr0 >> 4;
+			priv->viu.vd1_afbc_body_addr = 0;
+		} else {
+			/* Default mode is 4k per superblock */
+			unsigned long block_size = 4096;
+			unsigned long body_size;
+
+			/* 8bit mem saving mode is 3072bytes per superblock */
+			if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE)
+				block_size = 3072;
+
+			body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) *
+				    (ALIGN(priv->viu.vd1_height0, 32) / 32) *
+				    block_size;
+
+			priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4;
+			/* Header is after body content */
+			priv->viu.vd1_afbc_head_addr = (priv->viu.vd1_addr0 +
+							body_size) >> 4;
+		}
 	}
 
 	priv->viu.vd1_enabled = true;
@@ -754,7 +767,8 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane,
 			return false;
 		}
 
-		if (layout != AMLOGIC_FBC_LAYOUT_BASIC) {
+		if (layout != AMLOGIC_FBC_LAYOUT_BASIC &&
+		    layout != AMLOGIC_FBC_LAYOUT_SCATTER) {
 			DRM_DEBUG_KMS("%llx invalid layout %x\n",
 				      modifier, layout);
 			return false;
@@ -800,8 +814,11 @@ static const uint32_t supported_drm_formats[] = {
 };
 
 static const uint64_t format_modifiers[] = {
+	DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_SCATTER,
+				   AMLOGIC_FBC_OPTION_MEM_SAVING),
 	DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC,
 				   AMLOGIC_FBC_OPTION_MEM_SAVING),
+	DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_SCATTER, 0),
 	DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, 0),
 	DRM_FORMAT_MOD_LINEAR,
 	DRM_FORMAT_MOD_INVALID,
-- 
2.22.0




More information about the linux-amlogic mailing list