[PATCH] ASoC: meson: Use managed DMA buffer allocation
Jerome Brunet
jbrunet at baylibre.com
Fri Dec 18 11:28:10 EST 2020
On Fri 18 Dec 2020 at 16:45, Lars-Peter Clausen <lars at metafoo.de> wrote:
> Using a managed buffer will pre-allocate the buffer using
> snd_pcm_lib_preallocate_pages() and automatically free it when the PCM is
> destroyed.
>
> In addition it will call snd_pcm_lib_malloc_pages() before the driver's
> hw_params() callback and snd_pcm_lib_free_pages() after the driver's
> hw_free() callback.
>
> This slightly reduces the boilerplate code of the driver.
>
> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
> ---
> sound/soc/meson/aiu-fifo-i2s.c | 1 -
> sound/soc/meson/aiu-fifo-spdif.c | 1 -
> sound/soc/meson/aiu-fifo.c | 18 ++----------------
> 3 files changed, 2 insertions(+), 18 deletions(-)
>
> diff --git a/sound/soc/meson/aiu-fifo-i2s.c b/sound/soc/meson/aiu-fifo-i2s.c
> index d91b0d874342..2388a2d0b3a6 100644
> --- a/sound/soc/meson/aiu-fifo-i2s.c
> +++ b/sound/soc/meson/aiu-fifo-i2s.c
> @@ -124,7 +124,6 @@ const struct snd_soc_dai_ops aiu_fifo_i2s_dai_ops = {
> .trigger = aiu_fifo_i2s_trigger,
> .prepare = aiu_fifo_i2s_prepare,
> .hw_params = aiu_fifo_i2s_hw_params,
> - .hw_free = aiu_fifo_hw_free,
> .startup = aiu_fifo_startup,
> .shutdown = aiu_fifo_shutdown,
> };
> diff --git a/sound/soc/meson/aiu-fifo-spdif.c b/sound/soc/meson/aiu-fifo-spdif.c
> index 44eb6faacf44..2fb30f89bf7a 100644
> --- a/sound/soc/meson/aiu-fifo-spdif.c
> +++ b/sound/soc/meson/aiu-fifo-spdif.c
> @@ -158,7 +158,6 @@ const struct snd_soc_dai_ops aiu_fifo_spdif_dai_ops = {
> .trigger = fifo_spdif_trigger,
> .prepare = fifo_spdif_prepare,
> .hw_params = fifo_spdif_hw_params,
> - .hw_free = aiu_fifo_hw_free,
> .startup = aiu_fifo_startup,
> .shutdown = aiu_fifo_shutdown,
> };
> diff --git a/sound/soc/meson/aiu-fifo.c b/sound/soc/meson/aiu-fifo.c
> index aa88aae8e517..4ad23267cace 100644
> --- a/sound/soc/meson/aiu-fifo.c
> +++ b/sound/soc/meson/aiu-fifo.c
> @@ -99,11 +99,6 @@ int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
> struct snd_soc_component *component = dai->component;
> struct aiu_fifo *fifo = dai->playback_dma_data;
> dma_addr_t end;
> - int ret;
> -
> - ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
> - if (ret < 0)
> - return ret;
>
> /* Setup the fifo boundaries */
> end = runtime->dma_addr + runtime->dma_bytes - fifo->fifo_block;
> @@ -124,12 +119,6 @@ int aiu_fifo_hw_params(struct snd_pcm_substream *substream,
> return 0;
> }
>
> -int aiu_fifo_hw_free(struct snd_pcm_substream *substream,
> - struct snd_soc_dai *dai)
> -{
> - return snd_pcm_lib_free_pages(substream);
> -}
> -
> static irqreturn_t aiu_fifo_isr(int irq, void *dev_id)
> {
> struct snd_pcm_substream *playback = dev_id;
> @@ -187,15 +176,12 @@ void aiu_fifo_shutdown(struct snd_pcm_substream *substream,
> int aiu_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd,
> struct snd_soc_dai *dai)
> {
> - struct snd_pcm_substream *substream =
> - rtd->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
> struct snd_card *card = rtd->card->snd_card;
> struct aiu_fifo *fifo = dai->playback_dma_data;
> size_t size = fifo->pcm->buffer_bytes_max;
>
> - snd_pcm_lib_preallocate_pages(substream,
> - SNDRV_DMA_TYPE_DEV,
> - card->dev, size, size);
> + snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV,
> + card->dev, size, size);
Hi Lars-Peter,
These FIFOs only do playback so to avoid wasting memory
s/snd_pcm_set_managed_buffer_all/snd_pcm_set_managed_buffer ?
>
> return 0;
> }
More information about the linux-amlogic
mailing list