[PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit
Nicolas Dufresne
nicolas at ndufresne.ca
Tue Dec 8 11:54:04 EST 2020
Le mardi 17 novembre 2020 à 09:44 +0100, Neil Armstrong a écrit :
> The GE2D is a 2D accelerator with various features like configurable blitter
> with alpha blending, frame rotation, scaling, format conversion and colorspace
> conversion.
>
> The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
> - 0, 90, 180, 270deg rotation
> - horizontal/vertical flipping
> - source cropping
> - destination compositing
> - 32bit/24bit/16bit format conversion
>
> This adds the support for the GE2D version found in the AXG SoCs Family.
>
> The missing features are:
> - Source scaling
> - Colorspace conversion
> - Advanced alpha blending & blitting options
Is there some Open Source software using this driver ? GStreamer got some
support, but it's mostly focused on CSC and Scaling (flipping should work, but
rotation is not implemented). But I'm not aware of anything else, hence asking.
>
> Dependencies:
> - Patches 1-3: None
> - Patch 4:
> https://lkml.kernel.org/r/20200915124553.8056-1-narmstrong@baylibre.com (appli
> ed for 5.11)
>
> Changes since v2:
> - removed error check in and after get_frame()
> - moved the v4l2_file_operations lower in the code to avoid adding
> vidioc_setup_cap_fmt on top
> - removed all memcpy of pix_fmt
> - simplified & fixed ge2d_start_streaming
> - added local buffer type check in vidioc_g_selection instead of using
> get_frame error
> - removed impossible <0 rectangle check, fixed error string
> - added comment on condition after V4L2_CID_ROTATE
>
> Changes since v1:
> - Rebased on v5.10-rc1
>
> / # v4l2-compliance -s
> v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit
> time_t
>
> Compliance test for meson-ge2d device /dev/video0:
>
> Driver Info:
> Driver name : meson-ge2d
> Card type : meson-ge2d
> Bus info : platform:meson-ge2d
> Driver version : 5.9.0
> Capabilities : 0x84208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> test invalid ioctls: OK
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 4 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test blocking wait: OK
> Video Capture: Captured 58 buffers
> test MMAP (no poll): OK
> Video Capture: Captured 58 buffers
> test MMAP (select): OK
> Video Capture: Captured 58 buffers
> test MMAP (epoll): OK
> test USERPTR (no poll): OK (Not Supported)
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0,
> Warnings: 0
>
> Neil Armstrong (4):
> dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
> media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
> MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
> arm64: dts: meson-axg: add GE2D node
>
> .../bindings/media/amlogic,axg-ge2d.yaml | 47 +
> MAINTAINERS | 9 +
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 9 +
> drivers/media/platform/Kconfig | 13 +
> drivers/media/platform/Makefile | 2 +
> drivers/media/platform/meson/ge2d/Makefile | 3 +
> drivers/media/platform/meson/ge2d/ge2d-regs.h | 360 ++++++
> drivers/media/platform/meson/ge2d/ge2d.c | 1091 +++++++++++++++++
> 8 files changed, 1534 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-
> ge2d.yaml
> create mode 100644 drivers/media/platform/meson/ge2d/Makefile
> create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
> create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
>
More information about the linux-amlogic
mailing list