[PATCH 2/2] arm64: dts: meson: vim3: enable hdmi audio loopback

[Jerome Brunet]

Enable audio capture frontends and a tdm decoder.
This makes it possible to loopback the audio played on the hdmi codec,
which is the only output interface at the moment.

Of course, one TODDR device would be enough to do that but since
the 3 FRDDRs are enabled on the playback side, let's do the same on the
capture side.

Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   | 41 +++++++++++++++++--
 1 file changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 12465c4becc7..4cf2c193d168 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -166,11 +166,16 @@ hdmi_connector_in: endpoint {
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12B-KHADAS-VIM3";
-		audio-aux-devs = <&tdmout_a>;
+		audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
 		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
 				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
 				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
-				"TDM_A Playback", "TDMOUT_A OUT";
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 1", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -193,8 +198,20 @@ dai-link-2 {
 			sound-dai = <&frddr_c>;
 		};
 
-		/* 8ch hdmi interface */
 		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
 			sound-dai = <&tdmif_a>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -209,7 +226,7 @@ codec {
 		};
 
 		/* hdmi glue */
-		dai-link-4 {
+		dai-link-7 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
 
 			codec {
@@ -449,10 +466,26 @@ &tdmif_a {
 	status = "okay";
 };
 
+&tdmin_a {
+	status = "okay";
+};
+
 &tdmout_a {
 	status = "okay";
 };
 
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
 &tohdmitx {
 	status = "okay";
 };
-- 
2.28.0