[PATCH v4 1/2] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node
Neil Armstrong
narmstrong at baylibre.com
Mon Aug 31 09:25:42 EDT 2020
On 31/08/2020 09:59, Anand Moon wrote:
> Enable RTC PCF8563 node on Odroid-N2 SBC, In order to
> support the RTC wakealarm feature for suspend and resume.
> Also assign an alias to the pcf8563 to rtc0 and meson-vrtc to rtc1
> timer device to prevent it being assigned to /dev/rtc0
> which disto userspace tools assume is a clock device.
>
> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Cc: Kevin Hilman <khilman at baylibre.com>
> Suggested-by: Christian Hewitt <christianshewitt at gmail.com>
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
> Changes v4
> --Add gpio interrupt for GPIOAO.BIT7 as suggested by Neil.
> Changes v3
> --Drop the INI GPIOAO.BIT7 pinctrl.
> --Added missing RTC alias so that rtc get assigned correcly,
> as suggested by Chris Hewitt.
> changes v2
> --Fix the missing INT (GPIOAO.BIT7) pinctrl.
> --Fix the missing rtcwakeup.
> --Drop the clock not required clock property by the PCF8563 driver.
> ---
> .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> index 34fffa6d859d..3e2aaa6f48e5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> @@ -19,6 +19,8 @@ / {
> aliases {
> serial0 = &uart_AO;
> ethernet0 = ðmac;
> + rtc0 = &rtc0;
> + rtc1 = &vrtc;
> };
>
> dioo2133: audio-amplifier-0 {
> @@ -477,6 +479,21 @@ hdmi_tx_tmds_out: endpoint {
> };
> };
>
> +&i2c3 {
> + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + rtc0: rtc at 51 {
> + reg = <0x51>;
> + compatible = "nxp,pcf8563";
> + /* RTC INT */
> + interrupts = <GPIOAO_7 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-parent = <&gpio_intc>;
> + wakeup-source;
> + };
> +};
> +
> &ir {
> status = "okay";
> pinctrl-0 = <&remote_input_ao_pins>;
>
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
More information about the linux-amlogic
mailing list