[PATCH v3 01/18] iio: accel: bma180: Simplify with dev_err_probe()

[Krzysztof Kozlowski]

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
---
 drivers/iio/accel/bma180.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 5b7a467c7b27..448faed001fd 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -1000,19 +1000,15 @@ static int bma180_probe(struct i2c_client *client,
 		return ret;
 
 	data->vdd_supply = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(data->vdd_supply)) {
-		if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vdd regulator %d\n",
-				(int)PTR_ERR(data->vdd_supply));
-		return PTR_ERR(data->vdd_supply);
-	}
+	if (IS_ERR(data->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
+				     "Failed to get vdd regulator\n");
+
 	data->vddio_supply = devm_regulator_get(dev, "vddio");
-	if (IS_ERR(data->vddio_supply)) {
-		if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vddio regulator %d\n",
-				(int)PTR_ERR(data->vddio_supply));
-		return PTR_ERR(data->vddio_supply);
-	}
+	if (IS_ERR(data->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(data->vddio_supply),
+				     "Failed to get vddio regulator\n");
+
 	/* Typical voltage 2.4V these are min and max */
 	ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
 	if (ret)
-- 
2.17.1