[PATCH] ASoC: meson: axg-toddr: fix channel order on g12 platforms
Jerome Brunet
jbrunet at baylibre.com
Fri Aug 28 11:14:38 EDT 2020
On g12 and following platforms, The first channel of record with more than
2 channels ends being placed randomly on an even channel of the output.
On these SoCs, a bit was added to force the first channel to be placed at
the beginning of the output. Apparently the behavior if the bit is not set
is not easily predictable. According to the documentation, this bit is not
present on the axg series.
Set the bit on g12 and fix the problem.
Fixes: a3c23a8ad4dc ("ASoC: meson: axg-toddr: add g12a support")
Reported-by: Nicolas Belin <nbelin at baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
sound/soc/meson/axg-toddr.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c
index e711abcf8c12..d6adf7edea41 100644
--- a/sound/soc/meson/axg-toddr.c
+++ b/sound/soc/meson/axg-toddr.c
@@ -18,6 +18,7 @@
#define CTRL0_TODDR_SEL_RESAMPLE BIT(30)
#define CTRL0_TODDR_EXT_SIGNED BIT(29)
#define CTRL0_TODDR_PP_MODE BIT(28)
+#define CTRL0_TODDR_SYNC_CH BIT(27)
#define CTRL0_TODDR_TYPE_MASK GENMASK(15, 13)
#define CTRL0_TODDR_TYPE(x) ((x) << 13)
#define CTRL0_TODDR_MSB_POS_MASK GENMASK(12, 8)
@@ -189,10 +190,31 @@ static const struct axg_fifo_match_data axg_toddr_match_data = {
.dai_drv = &axg_toddr_dai_drv
};
+static int g12a_toddr_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
+ int ret;
+
+ ret = axg_toddr_dai_startup(substream, dai);
+ if (ret)
+ return ret;
+
+ /*
+ * Make sure the first channel ends up in the at beginning of the output
+ * As weird as it looks, without this the first channel may be misplaced
+ * in memory, with a random shift of 2 channels.
+ */
+ regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_SYNC_CH,
+ CTRL0_TODDR_SYNC_CH);
+
+ return 0;
+}
+
static const struct snd_soc_dai_ops g12a_toddr_ops = {
.prepare = g12a_toddr_dai_prepare,
.hw_params = axg_toddr_dai_hw_params,
- .startup = axg_toddr_dai_startup,
+ .startup = g12a_toddr_dai_startup,
.shutdown = axg_toddr_dai_shutdown,
};
--
2.25.4
More information about the linux-amlogic
mailing list