[PATCH v2 29/40] PCI: dwc/qcom: Use common PCI register definitions

Rob Herring robh at kernel.org
Thu Aug 20 23:54:09 EDT 2020


The QCom driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.

Cc: Stanimir Varbanov <svarbanov at mm-sol.com>
Cc: Andy Gross <agross at kernel.org>
Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Cc: Bjorn Helgaas <bhelgaas at google.com>
Cc: linux-arm-msm at vger.kernel.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index fe7fc2ccd76d..d8d1fb7e0b8f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -67,10 +67,6 @@
 #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1		0x81c
 #define CFG_BRIDGE_SB_INIT			BIT(0)
 
-#define PCIE20_CAP				0x70
-#define PCIE20_DEVICE_CONTROL2_STATUS2		(PCIE20_CAP + PCI_EXP_DEVCTL2)
-#define PCIE20_CAP_LINK_CAPABILITIES		(PCIE20_CAP + PCI_EXP_LNKCAP)
-#define PCIE20_CAP_LINK_1			(PCIE20_CAP + 0x14)
 #define PCIE_CAP_LINK1_VAL			0x2FD7F
 
 #define PCIE20_PARF_Q2A_FLUSH			0x1AC
@@ -1017,6 +1013,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	int i, ret;
 	u32 val;
 
@@ -1092,14 +1089,14 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
 
 	writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
 	writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
-	writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + PCIE20_CAP_LINK_1);
+	writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
 
-	val = readl(pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
+	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
 	val &= ~PCI_EXP_LNKCAP_ASPMS;
-	writel(val, pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
+	writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
 
-	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base +
-		PCIE20_DEVICE_CONTROL2_STATUS2);
+	writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
+		PCI_EXP_DEVCTL2);
 
 	return 0;
 
@@ -1252,7 +1249,8 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
 {
-	u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA);
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u16 val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
 
 	return !!(val & PCI_EXP_LNKSTA_DLLLA);
 }
-- 
2.25.1




More information about the linux-amlogic mailing list