[PATCH 1/1] usb: dwc3: meson-g12a: fix shared reset control use
Dan Robertson
dan at dlrobertson.com
Thu Aug 20 14:44:37 EDT 2020
On Wed, Aug 19, 2020 at 05:03:32PM +0200, Jerome Brunet wrote:
>
> On Mon 13 Jul 2020 at 18:05, Dan Robertson <dan at dlrobertson.com> wrote:
>
> > The reset is a shared reset line, but reset_control_reset is still used
> > and reset_control_deassert is not guaranteed to have been called before
> > the first reset_control_assert call. When suspending the following
> > warning may be seen:
>
> And now the same type of warning maybe seen on boot. This is
> happening for me on the libretech-cc (s905x - gxl).
>
> [ 1.863469] ------------[ cut here ]------------
> [ 1.867914] WARNING: CPU: 1 PID: 16 at drivers/reset/core.c:309 reset_control_reset+0x130/0x150
> [ 1.876525] Modules linked in:
> [ 1.879548] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 5.9.0-rc1-00167-ga2e4e3a34775 #64
> [ 1.887737] Hardware name: Libre Computer AML-S905X-CC V2 (DT)
> [ 1.893525] Workqueue: events deferred_probe_work_func
> [ 1.898607] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
> [ 1.904126] pc : reset_control_reset+0x130/0x150
> [ 1.908700] lr : phy_meson_gxl_usb2_init+0x24/0x70
> [ 1.913439] sp : ffff8000123ebad0
> [ 1.916717] x29: ffff8000123ebad0 x28: 0000000000000000
> [ 1.921978] x27: ffff00007c4b1ac8 x26: ffff00007c4b1ab0
> [ 1.927239] x25: ffff00007fc149b0 x24: ffff00007c4b1ab0
> [ 1.932500] x23: ffff00007cd03800 x22: ffff800011fb9000
> [ 1.937761] x21: ffff00007c60db08 x20: ffff00007c468a80
> [ 1.943023] x19: ffff00007c466b00 x18: ffffffffffffffff
> [ 1.948284] x17: 0000000000000000 x16: 000000000000000e
> [ 1.953545] x15: ffff800011fb9948 x14: ffffffffffffffff
> [ 1.958806] x13: ffffffff00000000 x12: ffffffffffffffff
> [ 1.964068] x11: 0000000000000020 x10: 7f7f7f7f7f7f7f7f
> [ 1.969329] x9 : 78676f2c32617274 x8 : 0000000000000000
> [ 1.974590] x7 : ffffffffffffffff x6 : 0000000000000000
> [ 1.979851] x5 : 0000000000000000 x4 : 0000000000000000
> [ 1.985112] x3 : 0000000000000000 x2 : ffff8000107aa370
> [ 1.990374] x1 : 0000000000000001 x0 : 0000000000000001
> [ 1.995636] Call trace:
> [ 1.998054] reset_control_reset+0x130/0x150
> [ 2.002279] phy_meson_gxl_usb2_init+0x24/0x70
> [ 2.006677] phy_init+0x78/0xd0
> [ 2.009784] dwc3_meson_g12a_probe+0x2c8/0x560
> [ 2.014182] platform_drv_probe+0x58/0xa8
> [ 2.018149] really_probe+0x114/0x3d8
> [ 2.021770] driver_probe_device+0x5c/0xb8
> [ 2.025824] __device_attach_driver+0x98/0xb8
> [ 2.030138] bus_for_each_drv+0x74/0xd8
> [ 2.033933] __device_attach+0xec/0x148
> [ 2.037726] device_initial_probe+0x24/0x30
> [ 2.041868] bus_probe_device+0x9c/0xa8
> [ 2.045663] deferred_probe_work_func+0x7c/0xb8
> [ 2.050150] process_one_work+0x1f0/0x4b0
> [ 2.054115] worker_thread+0x210/0x480
> [ 2.057824] kthread+0x158/0x160
> [ 2.061017] ret_from_fork+0x10/0x18
> [ 2.064550] ---[ end trace 94d737efe593c6f6 ]---
> [ 2.069158] phy phy-d0078000.phy.0: phy init failed --> -22
> [ 2.074858] dwc3-meson-g12a: probe of d0078080.usb failed with error -22
>
> This breaks USB on this device. reverting the change brings it back.
>
> Looking at the reset framework code, I don't think drivers sharing the
> same reset line should mix using reset_control_reset() VS
> reset_control_assert()/reset_control_deassert()
>
Thanks for finding this. I was only able to test on the Odroid N2
> >
> > WARNING: CPU: 1 PID: 5530 at drivers/reset/core.c:355 reset_control_assert+0x184/0x19c
> > Hardware name: Hardkernel ODROID-N2 (DT)
> > [..]
> > pc : reset_control_assert+0x184/0x19c
> > lr : dwc3_meson_g12a_suspend+0x68/0x7c
> > [..]
> > Call trace:
> > reset_control_assert+0x184/0x19c
> > dwc3_meson_g12a_suspend+0x68/0x7c
> > platform_pm_suspend+0x28/0x54
> > __device_suspend+0x590/0xabc
> > dpm_suspend+0x104/0x404
> > dpm_suspend_start+0x84/0x1bc
> > suspend_devices_and_enter+0xc4/0x4fc
> > pm_suspend+0x198/0x2d4
> >
> > Fixes: 6d9fa35a347a87 ("usb: dwc3: meson-g12a: get the reset as shared")
> > Signed-off-by: Dan Robertson <dan at dlrobertson.com>
> > ---
> > drivers/usb/dwc3/dwc3-meson-g12a.c | 15 +++++++++------
> > 1 file changed, 9 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
> > index 1f7f4d88ed9d..88b75b5a039c 100644
> > --- a/drivers/usb/dwc3/dwc3-meson-g12a.c
> > +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
> > @@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
> > goto err_disable_clks;
> > }
> >
> > - ret = reset_control_reset(priv->reset);
> > + ret = reset_control_deassert(priv->reset);
>
> The change introduced here is significant. If the reset is not initially
> asserted, it never will be before the life of the device.
>
> This means that Linux will have to deal which whatever state is left by the
> bootloader. This looks sketchy ...
>
> I think the safer way solve the problem here would be to keep using
> reset_control_reset() and introduce a new API in the reset
> framework to decrement the reset line "triggered_count"
> (reset_control_clear() ??)
I have very limited experience with reset controls, but phy_meson_gxl_usb2_init
calls reset_control_reset on a shared reset line, which should not be done
according to the reset control docs. Would removing the use of reset_control_reset,
or using reset_control_(de)assert in phy_meson_gxl_usb2_init also resolve the
issue?
> That way, if all device using the reset line go to suspend, the line will
> be "reset-able" again by the first device coming out of suspend ?
>
> Philip, would you be ok with such new API ?
>
> In the meantime, I think this change should be reverted. A warning on
> suspend seems less critical than a regression breaking USB completly.
The reset_control_(de)assert() calls could also be removed from the
suspend/resume calls for now.
> > if (ret)
> > - goto err_disable_clks;
> > + goto err_assert_reset;
> >
> > ret = dwc3_meson_g12a_get_phys(priv);
> > if (ret)
> > - goto err_disable_clks;
> > + goto err_assert_reset;
> >
> > ret = priv->drvdata->setup_regmaps(priv, base);
> > if (ret)
> > @@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
> > if (priv->vbus) {
> > ret = regulator_enable(priv->vbus);
> > if (ret)
> > - goto err_disable_clks;
> > + goto err_assert_reset;
> > }
> >
> > /* Get dr_mode */
> > @@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
> >
> > ret = priv->drvdata->usb_init(priv);
> > if (ret)
> > - goto err_disable_clks;
> > + goto err_assert_reset;
> >
> > /* Init PHYs */
> > for (i = 0 ; i < PHY_COUNT ; ++i) {
> > ret = phy_init(priv->phys[i]);
> > if (ret)
> > - goto err_disable_clks;
> > + goto err_assert_reset;
> > }
> >
> > /* Set PHY Power */
> > @@ -809,6 +809,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
> > for (i = 0 ; i < PHY_COUNT ; ++i)
> > phy_exit(priv->phys[i]);
> >
> > +err_assert_reset:
> > + reset_control_assert(priv->reset);
> > +
> > err_disable_clks:
> > clk_bulk_disable_unprepare(priv->drvdata->num_clks,
> > priv->drvdata->clks);
> >
> >
> > _______________________________________________
> > linux-amlogic mailing list
> > linux-amlogic at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20200820/c5d55eb9/attachment.sig>
More information about the linux-amlogic
mailing list