[PATCH 1/1] usb: dwc3: meson-g12a: fix shared reset control use

Kevin Hilman khilman at baylibre.com
Thu Aug 20 14:02:19 EDT 2020


Jerome Brunet <jbrunet at baylibre.com> writes:

> On Mon 13 Jul 2020 at 18:05, Dan Robertson <dan at dlrobertson.com> wrote:
>
>> The reset is a shared reset line, but reset_control_reset is still used
>> and reset_control_deassert is not guaranteed to have been called before
>> the first reset_control_assert call. When suspending the following
>> warning may be seen:
>
> And now the same type of warning maybe seen on boot. This is
> happening for me on the libretech-cc (s905x - gxl).
>
> [    1.863469] ------------[ cut here ]------------
> [    1.867914] WARNING: CPU: 1 PID: 16 at drivers/reset/core.c:309 reset_control_reset+0x130/0x150
> [    1.876525] Modules linked in:
> [    1.879548] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 5.9.0-rc1-00167-ga2e4e3a34775 #64
> [    1.887737] Hardware name: Libre Computer AML-S905X-CC V2 (DT)
> [    1.893525] Workqueue: events deferred_probe_work_func
> [    1.898607] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
> [    1.904126] pc : reset_control_reset+0x130/0x150
> [    1.908700] lr : phy_meson_gxl_usb2_init+0x24/0x70
> [    1.913439] sp : ffff8000123ebad0
> [    1.916717] x29: ffff8000123ebad0 x28: 0000000000000000 
> [    1.921978] x27: ffff00007c4b1ac8 x26: ffff00007c4b1ab0 
> [    1.927239] x25: ffff00007fc149b0 x24: ffff00007c4b1ab0 
> [    1.932500] x23: ffff00007cd03800 x22: ffff800011fb9000 
> [    1.937761] x21: ffff00007c60db08 x20: ffff00007c468a80 
> [    1.943023] x19: ffff00007c466b00 x18: ffffffffffffffff 
> [    1.948284] x17: 0000000000000000 x16: 000000000000000e 
> [    1.953545] x15: ffff800011fb9948 x14: ffffffffffffffff 
> [    1.958806] x13: ffffffff00000000 x12: ffffffffffffffff 
> [    1.964068] x11: 0000000000000020 x10: 7f7f7f7f7f7f7f7f 
> [    1.969329] x9 : 78676f2c32617274 x8 : 0000000000000000 
> [    1.974590] x7 : ffffffffffffffff x6 : 0000000000000000 
> [    1.979851] x5 : 0000000000000000 x4 : 0000000000000000 
> [    1.985112] x3 : 0000000000000000 x2 : ffff8000107aa370 
> [    1.990374] x1 : 0000000000000001 x0 : 0000000000000001 
> [    1.995636] Call trace:
> [    1.998054]  reset_control_reset+0x130/0x150
> [    2.002279]  phy_meson_gxl_usb2_init+0x24/0x70
> [    2.006677]  phy_init+0x78/0xd0
> [    2.009784]  dwc3_meson_g12a_probe+0x2c8/0x560
> [    2.014182]  platform_drv_probe+0x58/0xa8
> [    2.018149]  really_probe+0x114/0x3d8
> [    2.021770]  driver_probe_device+0x5c/0xb8
> [    2.025824]  __device_attach_driver+0x98/0xb8
> [    2.030138]  bus_for_each_drv+0x74/0xd8
> [    2.033933]  __device_attach+0xec/0x148
> [    2.037726]  device_initial_probe+0x24/0x30
> [    2.041868]  bus_probe_device+0x9c/0xa8
> [    2.045663]  deferred_probe_work_func+0x7c/0xb8
> [    2.050150]  process_one_work+0x1f0/0x4b0
> [    2.054115]  worker_thread+0x210/0x480
> [    2.057824]  kthread+0x158/0x160
> [    2.061017]  ret_from_fork+0x10/0x18
> [    2.064550] ---[ end trace 94d737efe593c6f6 ]---
> [    2.069158] phy phy-d0078000.phy.0: phy init failed --> -22
> [    2.074858] dwc3-meson-g12a: probe of d0078080.usb failed with error -22
>
> This breaks USB on this device. reverting the change brings it back.

[...]

> In the meantime, I think this change should be reverted. A warning on
> suspend seems less critical than a regression breaking USB completly.

Fully agree.

Phillip, can you please revert this patch until the right solution is
found?  Boot failure is much worse than a suspend warning.

Kevin



More information about the linux-amlogic mailing list