[PATCH v2 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node

[Anand Moon]

Hi Martin,

Thanks for your review comments .

On Tue, 18 Aug 2020 at 01:06, Martin Blumenstingl
<martin.blumenstingl at googlemail.com> wrote:
>
> Hi Anand,
>
> thank you for updating this patch!
>
> On Mon, Aug 17, 2020 at 12:21 PM Anand Moon <linux.amoon at gmail.com> wrote:
> [...]
> > changes v2
> > --Fix the missing INT (GPIOA.BIT7) pinctrl.
> should I also expect an interrupt property somewhere below?
>
> > --Fix the missing rtcwakeup.
> > --Drop the clock not required clock property by the PCF8563 driver.
> > ---
> >  .../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > index 34fffa6d859d..f08ae1b337ad 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > @@ -477,6 +477,19 @@ hdmi_tx_tmds_out: endpoint {
> >         };
> >  };
> >
> > +&i2c3 {
> > +       pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> > +       pinctrl-1 = <&tdm_c_din3_a_pins>;
> > +       pinctrl-names = "default";
> why is there pinctrl-1 without any corresponding "pinctrl-names" entry?
> also I'm surprised to see a TDM (audio) related pin function as part
> of an I2C controller. if this is correct then I'd appreciate a bit
> information (for example as part of the patch description) why that is
>
>
> Martin

Opps, I could not figure the difference between GPIOA_7 and GPIOAO_7 pins
I will try to figure out the correct configuration pin for this node.

Best Regards
-Anand