[RFC 25/27] PCI: dwc/qcom: Use common PCI register definitions
Rob Herring
robh at kernel.org
Mon Aug 3 17:01:14 EDT 2020
The QCom driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.
Cc: Stanimir Varbanov <svarbanov at mm-sol.com>
Cc: Andy Gross <agross at kernel.org>
Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Cc: Bjorn Helgaas <bhelgaas at google.com>
Cc: linux-pci at vger.kernel.org
Cc: linux-arm-msm at vger.kernel.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 27 ++++++++++----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 9f1d3ba686fa..dba5f7d7f727 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -39,11 +39,6 @@
#define L23_CLK_RMV_DIS BIT(2)
#define L1_CLK_RMV_DIS BIT(1)
-#define PCIE20_COMMAND_STATUS 0x04
-#define CMD_BME_VAL 0x4
-#define PCIE20_DEVICE_CONTROL2_STATUS2 0x98
-#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
-
#define PCIE20_PARF_PHY_CTRL 0x40
#define PCIE20_PARF_PHY_REFCLK 0x4C
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
@@ -65,10 +60,6 @@
#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
#define CFG_BRIDGE_SB_INIT BIT(0)
-#define PCIE20_CAP 0x70
-#define PCIE20_CAP_LINK_CAPABILITIES (PCIE20_CAP + 0xC)
-#define PCIE20_CAP_ACTIVE_STATE_LINK_PM_SUPPORT (BIT(10) | BIT(11))
-#define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
#define PCIE_CAP_LINK1_VAL 0x2FD7F
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
@@ -974,6 +965,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
int i, ret;
u32 val;
@@ -1047,16 +1039,16 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
pcie->parf + PCIE20_PARF_SYS_CTRL);
writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
- writel(CMD_BME_VAL, pci->dbi_base + PCIE20_COMMAND_STATUS);
+ writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
- writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + PCIE20_CAP_LINK_1);
+ writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
- val = readl(pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
- val &= ~PCIE20_CAP_ACTIVE_STATE_LINK_PM_SUPPORT;
- writel(val, pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
+ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_ASPMS;
+ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
- writel(PCIE_CAP_CPL_TIMEOUT_DISABLE, pci->dbi_base +
- PCIE20_DEVICE_CONTROL2_STATUS2);
+ writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
+ PCI_EXP_DEVCTL2);
return 0;
@@ -1209,7 +1201,8 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
static int qcom_pcie_link_up(struct dw_pcie *pci)
{
- u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA);
+ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ u16 val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
return !!(val & PCI_EXP_LNKSTA_DLLLA);
}
--
2.25.1
More information about the linux-amlogic
mailing list