[PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails

Yizhuo yzhai003 at ucr.edu
Fri Sep 27 17:46:41 PDT 2019


Several functions in this file are trying to use regmap_read() to
initialize the specific variable, however, if regmap_read() fails,
the variable could be uninitialized but used directly, which is
potentially unsafe. The return value of regmap_read() should be
checked and handled.

Signed-off-by: Yizhuo <yzhai003 at ucr.edu>
---
 drivers/iio/adc/meson_saradc.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 7b28d045d271..c032a64108b4 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -323,6 +323,7 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	int regval, timeout = 10000;
+	int ret;
 
 	/*
 	 * NOTE: we need a small delay before reading the status, otherwise
@@ -331,7 +332,9 @@ static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
 	 */
 	do {
 		udelay(1);
-		regmap_read(priv->regmap, MESON_SAR_ADC_REG0, &regval);
+		ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, &regval);
+		if (ret)
+			return ret;
 	} while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
 
 	if (timeout < 0)
@@ -358,7 +361,11 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 		return -EINVAL;
 	}
 
-	regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
+	int ret = regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
+
+	if (ret)
+		return ret;
+
 	fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
 	if (fifo_chan != chan->address) {
 		dev_err(&indio_dev->dev,
@@ -491,6 +498,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	int val, timeout = 10000;
+	int ret;
 
 	mutex_lock(&indio_dev->mlock);
 
@@ -506,7 +514,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 		 */
 		do {
 			udelay(1);
-			regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
+			ret = regmap_read(priv->regmap,
+					MESON_SAR_ADC_DELAY, &val);
+			if (ret)
+				return ret;
 		} while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
 
 		if (timeout < 0) {
@@ -784,7 +795,10 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 		 * BL30 to make sure BL30 gets the values it expects when
 		 * reading the temperature sensor.
 		 */
-		regmap_read(priv->regmap, MESON_SAR_ADC_REG3, &regval);
+		ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG3, &regval);
+		if (ret)
+			return ret;
+
 		if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
 			return 0;
 	}
@@ -1014,7 +1028,11 @@ static irqreturn_t meson_sar_adc_irq(int irq, void *data)
 	unsigned int cnt, threshold;
 	u32 regval;
 
-	regmap_read(priv->regmap, MESON_SAR_ADC_REG0, &regval);
+	int ret = regmap_read(priv->regmap, MESON_SAR_ADC_REG0, &regval);
+
+	if (ret)
+		return ret;
+
 	cnt = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
 	threshold = FIELD_GET(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
 
-- 
2.17.1




More information about the linux-amlogic mailing list