[PATCH v5 0/7] Add support of New Amlogic temperature sensor for G12 SoCs

Guillaume La Roque glaroque at baylibre.com
Fri Sep 27 05:47:41 PDT 2019

This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.

First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.

Changes since v4:
  - Move thermal-zone in soc dtsi file
  - Remove critical trip point and add passive one
  - fix commit message
  - use devm_platform_ioremap_resource instead of platform_get_resource

Changes since v3:
  - Add cooling map and trip point for hot type
  - move compatible on g12a instead of g12 to be aligned with others
  - add all reviewer, sorry for this mistake

Changes since v2:
  - fix yaml documention
  - remove unneeded status variable for temperature-sensor node
  - rework driver after Martin review
  - add some information in commit message

Changes since v1:
  - fix enum vs const in documentation
  - fix error with thermal-sensor-cells value set to 1 instead of 0
  - add some dependencies needed to add cooling-maps

Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
              - missing dwc2 phy-names[2]
              - patchsets to add DVFS on G12a[3] which have deps on [4] and [5]

[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/

Guillaume La Roque (7):
  dt-bindings: thermal: Add DT bindings documentation for Amlogic
  thermal: amlogic: Add thermal driver to support G12 SoCs
  arm64: dts: amlogic: g12: add temperature sensor
  arm64: dts: meson: g12: Add minimal thermal zone
  arm64: dts: amlogic: g12a: add cooling properties
  arm64: dts: amlogic: g12b: add cooling properties
  MAINTAINERS: add entry for Amlogic Thermal driver

 .../bindings/thermal/amlogic,thermal.yaml     |  54 +++
 MAINTAINERS                                   |   9 +
 .../boot/dts/amlogic/meson-g12-common.dtsi    |  66 ++++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi   |  24 ++
 arch/arm64/boot/dts/amlogic/meson-g12b.dtsi   |  29 ++
 drivers/thermal/Kconfig                       |  11 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/amlogic_thermal.c             | 333 ++++++++++++++++++
 8 files changed, 527 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
 create mode 100644 drivers/thermal/amlogic_thermal.c


More information about the linux-amlogic mailing list