[PATCH AUTOSEL 4.19 42/50] pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c

Sasha Levin sashal at kernel.org
Tue Sep 24 09:48:39 PDT 2019


From: Otto Meier <gf435 at gmx.net>

[ Upstream commit cb0438e4436085d89706b5ccfce4d5da531253de ]

Hi i tried to use the uart_C of the the odroid-c2.

I enabled it in the dts file. During boot it crashed when the
the sdcard slot is addressed.

After long search in the net i found this:

https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856

After changing the pin definitions accordingly erverything works.
Uart_c is functioning and sdcard ist working.

Fixes: 6db0f3a8a04e46 ("pinctrl: amlogic: gxbb: add more UART pins")
Signed-off-by: Otto Meier <gf435 at gmx.net>
Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.net
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 4edeb4cae72aa..c4c70dc57dbee 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -198,8 +198,8 @@ static const unsigned int uart_rts_b_pins[]	= { GPIODV_27 };
 
 static const unsigned int uart_tx_c_pins[]	= { GPIOY_13 };
 static const unsigned int uart_rx_c_pins[]	= { GPIOY_14 };
-static const unsigned int uart_cts_c_pins[]	= { GPIOX_11 };
-static const unsigned int uart_rts_c_pins[]	= { GPIOX_12 };
+static const unsigned int uart_cts_c_pins[]	= { GPIOY_11 };
+static const unsigned int uart_rts_c_pins[]	= { GPIOY_12 };
 
 static const unsigned int i2c_sck_a_pins[]	= { GPIODV_25 };
 static const unsigned int i2c_sda_a_pins[]	= { GPIODV_24 };
@@ -445,10 +445,10 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(pwm_f_x,		3,	18),
 
 	/* Bank Y */
-	GROUP(uart_cts_c,	1,	19),
-	GROUP(uart_rts_c,	1,	18),
-	GROUP(uart_tx_c,	1,	17),
-	GROUP(uart_rx_c,	1,	16),
+	GROUP(uart_cts_c,	1,	17),
+	GROUP(uart_rts_c,	1,	16),
+	GROUP(uart_tx_c,	1,	19),
+	GROUP(uart_rx_c,	1,	18),
 	GROUP(pwm_a_y,		1,	21),
 	GROUP(pwm_f_y,		1,	20),
 	GROUP(i2s_out_ch23_y,	1,	5),
-- 
2.20.1




More information about the linux-amlogic mailing list