[PATCH v5 0/3] arm64: meson-g12b: Add support for the Ugoos AM6
christianshewitt at gmail.com
Mon Sep 23 07:13:53 PDT 2019
This patchset adds support for the Ugoos AM6, an Android STB based on
the Amlogic W400 reference design with the S922X chipset.
v2: correction of minor nits
v3: address regulator and GPIO corrections from Neil Armstrong (using
schematic excerpts from Ugoos) and related v2 comments from Martin
Blumenstingle. Add acks on patches 1/2 from Rob Herring.
v4: address nits from Martin except for the vcc_3v3 node as it's not
known how to handle the vcc_3v3 regulator managed by ATF firmware, so
it remains untouched/undeclared like other g12a/g12b/sm1 boards.
v5: corrected some tabs v spaces issues introduced in v4.
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Ugoos
dt-bindings: arm: amlogic: Add support for the Ugoos AM6
arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +++++++++++++++++++++
4 files changed, 561 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
More information about the linux-amlogic