[PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF

Jerome Brunet jbrunet at baylibre.com
Mon Sep 23 02:31:40 PDT 2019


On Sat 21 Sep 2019 at 17:12, Martin Blumenstingl <martin.blumenstingl at googlemail.com> wrote:

> The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
> driver should not register the XTAL clock - instead it should be
> provided via .dts and then passed to the clock controller.
>
> Skip the registration of the XTAL clock if a parent clock is provided
> via OF. Fall back to registering the XTAL clock if this is not the case
> to keep support for old .dtbs.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  drivers/clk/meson/meson8b.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index b785b67baf2b..15ec14fde2a0 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
>  		meson8b_clk_regmaps[i]->map = map;
>  
>  	/*
> -	 * register all clks
> -	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
> +	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
> +	 * XTAL clock as input.
>  	 */
> -	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
> +	if (of_clk_get_parent_count(np))

If we are going for this, I'd prefer if could explicity check for the
clock named "xtal" instead of just checking if DT has clocks.

> +		i = CLKID_PLL_FIXED;
> +	else
> +		i = CLKID_XTAL;
> +
> +	/* register all clks */
> +	for (; i < CLK_NR_CLKS; i++) {
>  		/* array might be sparse */
>  		if (!clk_hw_onecell_data->hws[i])
>  			continue;
> -- 
> 2.23.0



More information about the linux-amlogic mailing list