[PATCH v3 4/4] arm64: dts: add support for A1 based Amlogic AD401

Jianxin Pan jianxin.pan at amlogic.com
Thu Sep 12 01:25:06 PDT 2019


Hi Neil,


On 2019/9/11 23:54, Neil Armstrong wrote:
> On 11/09/2019 17:38, Jianxin Pan wrote:
>> Add basic support for the Amlogic A1 based Amlogic AD401 board:
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
>> Timer, UART. It's capable of booting up into the serial console.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan at amlogic.com>
>> Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 131 +++++++++++++++++++++++++
>>  3 files changed, 162 insertions(+)
[...]
>> +
>> +	sm: secure-monitor {
>> +		compatible = "amlogic,meson-gxbb-sm";
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +
>> +		apb: bus at 0xfe000000 {
> 
> Should be bus at fe000000
>
Thanks for your review.
I resent a new version and fixed it.
>> +			compatible = "simple-bus";
>> +			reg = <0x0 0xfe000000 0x0 0x1000000>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
[...]
>> +	xtal: xtal-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xtal";
>> +		#clock-cells = <0>;
>> +	};
>> +};
>>
> 
> With that fixed:
> Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
> 
> Neil
> 
> .
> 




More information about the linux-amlogic mailing list