[PATCH 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal

Neil Armstrong narmstrong at baylibre.com
Wed Jul 31 05:44:54 PDT 2019


On 31/07/2019 14:14, Guillaume La Roque wrote:
> Adding the devicetree binding documentation for the Amlogic temperature
> sensor found in the Amlogic Meson G12 SoCs.
> the G12A  and G12B SoCs are supported.
> 
> Signed-off-by: Guillaume La Roque <glaroque at baylibre.com>
> ---
>  .../bindings/thermal/amlogic,thermal.yaml     | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> new file mode 100644
> index 000000000000..1e2fe84da13d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Thermal Driver
> +
> +maintainers:
> +  - Guillaume La Roque <glaroque at baylibre.com>
> +
> +description: Amlogic Thermal driver
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - amlogic,g12-cpu-thermal
> +              - amlogic,g12-ddr-thermal
> +          - enum:
> +              - amlogic,g12-thermal

Shouldn't be :
    compatible:
	items:
          - enum:
              - amlogic,g12-cpu-thermal
	      - amlogic,g12-ddr-thermal
          - const:
              - amlogic,g12-thermal

instead ?

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  amlogic,ao-secure:
> +    description: phandle to the ao-secure syscon
> +    allOf:
> +     - $ref: /schemas/types.yaml#/definitions/uint32
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - amlogic,ao-secure
> +
> +examples:
> +  - |
> +        cpu_temp: temperature-sensor at ff634800 {
> +                compatible = "amlogic,g12-cpu-thermal",
> +                             "amlogic,g12-thermal";
> +                reg = <0x0 0xff634800 0x0 0x50>;
> +                interrupts = <0x0 0x24 0x0>;
> +                clocks = <&clk 164>;
> +                status = "okay";
> +                #thermal-sensor-cells = <1>;
> +                amlogic,ao-secure = <&sec_AO>;
> +        };
> +...
> \ No newline at end of file
> 




More information about the linux-amlogic mailing list