[PATCH 0/4] Meson8b: Odroid-C1 improvements
martin.blumenstingl at googlemail.com
Thu Sep 13 13:29:15 PDT 2018
This is a small collection of improvements for the Odroid-C1 board.
My main goal is to prepare the CPU voltage regulator as I'm using
the Odroid-C1 to test my changes which will enable CPU frequency
scaling on Meson8/Meson8b/Meson8m2.
While I was going through the schematics anyways I added more
regulators, enabled the SAR ADC and added the /chosen/stdout-path
property to make debugging with "earlycon" easier.
schematics for the board are published by Hardkernel and can be found
NOTE: This series depends on my patch "ARM: dts: meson8b: add the
I2C_A, PWM_C and UART_B pins"  from my other series called
"Meson8b: add support for the Endless Mini EC-100" as this defines
the "pwm_c1_pins" for the CPU voltage regulator (which is controlled
Martin Blumenstingl (4):
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
ARM: dts: meson8b: odroidc1: enable the SAR ADC
ARM: dts: meson8b: odroidc1: add stdout-path property
arch/arm/boot/dts/meson8b-odroidc1.dts | 109 +++++++++++++++++++++++++
1 file changed, 109 insertions(+)
More information about the linux-amlogic