[PATCH 0/4] nvmem: meson: efuse updates
jbrunet at baylibre.com
Tue Oct 30 03:22:27 PDT 2018
The first change of this patchset just adds add error message in case
of failure. If there is problem with the secure monitor, the
SM_EFUSE_USER_MAX call will be first one to fail so it is better if it
give us a clue to help debugging, instead af silently failing.
Next this series adds the peripheral clock missing in this driver.
Like many other device in amlogic's SoC, the efuse requires a
peripheral clock to operate. ATM, the clock controller has
CLK_IGNORE_UNUSED on this clock and we have been lucky enough that the
bootloader left the clock enabled
At some point, we would like to remove those CLK_IGNORE_UNUSED, so if a
driver needs a clock, it needs to properly claim it.
The dts change needs to land before the actual driver change, to avoid
breaking the efuse on our users. If there an agreement on this series,
Kevin could you provide a tag to Srinivas ?
Jerome Brunet (4):
nvmem: meson-efuse: add error message on user_max failure.
nvmem: meson-efuse: bindings: add peripheral clock
arm64: dts: meson-gx: add efuse pclk
nvmem: meson-efuse: add peripheral clock
.../bindings/nvmem/amlogic-efuse.txt | 3 ++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 +++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 +++
drivers/nvmem/meson-efuse.c | 29 ++++++++++++++++++-
4 files changed, 39 insertions(+), 1 deletion(-)
More information about the linux-amlogic