[PATCH 2/2] mmc: meson-gx: add device reset

Ulf Hansson ulf.hansson at linaro.org
Wed May 30 00:27:42 PDT 2018


Jerome,

On 15 May 2018 at 11:57, Jerome Brunet <jbrunet at baylibre.com> wrote:
> Trigger the reset line of the mmc controller while probing, if available.
> The reset should be optional for now, at least until all related DT nodes
> have the reset property.
>
> Reviewed-by: Kevin Hilman <khilman at baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>

I got a regression boot report from kernelci. The bisect doesn't point
to a certain commit, but I found $subject patch a possible cause. Is
it something you can have a look at and see if it's a valid problem?
https://kernelci.org/boot/id/5b0d68a859b514726179a899/

Kind regards
Uffe

> ---
>  drivers/mmc/host/meson-gx-mmc.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 4f972b879fe6..9bca359f7936 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -35,6 +35,7 @@
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
>  #include <linux/interrupt.h>
>  #include <linux/bitfield.h>
>  #include <linux/pinctrl/consumer.h>
> @@ -1184,6 +1185,14 @@ static int meson_mmc_probe(struct platform_device *pdev)
>                 goto free_host;
>         }
>
> +       ret = device_reset_optional(&pdev->dev);
> +       if (ret) {
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(&pdev->dev, "device reset failed: %d\n", ret);
> +
> +               return ret;
> +       }
> +
>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         host->regs = devm_ioremap_resource(&pdev->dev, res);
>         if (IS_ERR(host->regs)) {
> --
> 2.14.3
>



More information about the linux-amlogic mailing list