[PATCH 05/14] arm64: dts: meson-axg: add audio fifos

Jerome Brunet jbrunet at baylibre.com
Tue Jul 24 05:52:29 PDT 2018


Add TODDR and FRDDR audio fifos of the AXG SoC.
These fifos are the capture and playback memory interfaces of audio
subsystem of the AXG.

Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---

 Kevin,

 As you will see below, this patch depends on the ARB reset bindings which
 have been accepted by Philip recently.

 Cheers
 Jerome

 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 3893c630d969..a20189844d92 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/axg-aoclkc.h>
 #include <dt-bindings/gpio/meson-axg-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -190,6 +191,72 @@
 				resets = <&reset RESET_AUDIO>;
 			};
 
+			toddr_a: audio-controller at 100 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x100 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_A";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+				resets = <&arb AXG_ARB_TODDR_A>;
+				status = "disabled";
+			};
+
+			toddr_b: audio-controller at 140 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x140 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_B";
+				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+				resets = <&arb AXG_ARB_TODDR_B>;
+				status = "disabled";
+			};
+
+			toddr_c: audio-controller at 180 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x180 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_C";
+				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+				resets = <&arb AXG_ARB_TODDR_C>;
+				status = "disabled";
+			};
+
+			frddr_a: audio-controller at 1c0 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x1c0 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_A";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+				resets = <&arb AXG_ARB_FRDDR_A>;
+				status = "disabled";
+			};
+
+			frddr_b: audio-controller at 200 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x200 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_B";
+				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+				resets = <&arb AXG_ARB_FRDDR_B>;
+				status = "disabled";
+			};
+
+			frddr_c: audio-controller at 240 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x240 0x0 0x1c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_C";
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+				resets = <&arb AXG_ARB_FRDDR_C>;
+				status = "disabled";
+			};
+
 			arb: reset-controller at 280 {
 				compatible = "amlogic,meson-axg-audio-arb";
 				reg = <0x0 0x280 0x0 0x4>;
-- 
2.17.1




More information about the linux-amlogic mailing list