[PATCH 1/2] clk: meson: Add vid_pll divider driver

Martin Blumenstingl martin.blumenstingl at googlemail.com
Fri Jul 20 12:17:30 PDT 2018


Hi Neil,

On Fri, Jul 20, 2018 at 11:40 AM Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> Add support the VID_PLL fully programmable divider used right after the
> HDMI PLL clock source. It is used to achieve complex fractional division
> with a programmble bitfield.
I assume you have no other information that the S912 datasheet, pages
64 and 77 which describe the HHI_VID_PLL_CLK_DIV register?

more comments inline

> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>
> ---
>  drivers/clk/meson/Makefile      |  2 +-
>  drivers/clk/meson/clkc.h        |  6 +++
>  drivers/clk/meson/vid-pll-div.c | 90 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 97 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/meson/vid-pll-div.c
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 72ec8c4..0234767 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -2,7 +2,7 @@
>  # Makefile for Meson specific clk
>  #
>
> -obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o
> +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
>  obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o
>  obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
> index 6b96d55..9166605 100644
> --- a/drivers/clk/meson/clkc.h
> +++ b/drivers/clk/meson/clkc.h
> @@ -90,6 +90,11 @@ struct meson_clk_phase_data {
>  int meson_clk_degrees_from_val(unsigned int val, unsigned int width);
>  unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width);
>
> +struct meson_vid_pll_div_data {
> +       struct parm val;
> +       struct parm sel;
> +};
> +
>  #define MESON_GATE(_name, _reg, _bit)                                  \
>  struct clk_regmap _name = {                                            \
>         .data = &(struct clk_regmap_gate_data){                         \
> @@ -112,5 +117,6 @@ extern const struct clk_ops meson_clk_cpu_ops;
>  extern const struct clk_ops meson_clk_mpll_ro_ops;
>  extern const struct clk_ops meson_clk_mpll_ops;
>  extern const struct clk_ops meson_clk_phase_ops;
> +extern const struct clk_ops meson_vid_pll_div_ro_ops;
>
>  #endif /* __CLKC_H */
> diff --git a/drivers/clk/meson/vid-pll-div.c b/drivers/clk/meson/vid-pll-div.c
> new file mode 100644
> index 0000000..5f267be
> --- /dev/null
> +++ b/drivers/clk/meson/vid-pll-div.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include "clkc.h"
> +
> +static inline struct meson_vid_pll_div_data *
> +meson_vid_pll_div_data(struct clk_regmap *clk)
> +{
> +       return (struct meson_vid_pll_div_data *)clk->data;
> +}
> +
> +/*
> + * This vid_pll divided is a fully programmable fractionnal divider to
> + * achieve complex video clock rates.
> + *
> + * Here are provided the commonly used fraction values provided by Amlogic.
> + */
> +
> +struct vid_pll_div {
> +       unsigned int shift_val;
> +       unsigned int shift_sel;
> +       unsigned int frac_top;
maybe call it divider?

> +       unsigned int frac_bot;
maybe call it multiplier?

> +};
> +
> +#define VID_PLL_DIV(_val, _sel, _ft, _fb)                              \
> +       {                                                               \
> +               .shift_val = (_val),                                    \
> +               .shift_sel = (_sel),                                    \
> +               .frac_top = (_ft),                                      \
> +               .frac_bot = (_fb),                                      \
> +       }
> +
> +static const struct vid_pll_div vid_pll_div_table[] = {
> +       VID_PLL_DIV(0x0aaa, 0, 2, 1),   /* 2/1  => /2 */
> +       VID_PLL_DIV(0x5294, 2, 5, 2),   /* 5/2  => /2.5 */
> +       VID_PLL_DIV(0x0db6, 0, 3, 1),   /* 3/1  => /3 */
> +       VID_PLL_DIV(0x36cc, 1, 7, 2),   /* 7/2  => /3.5 */
> +       VID_PLL_DIV(0x6666, 2, 15, 4),  /* 15/4 => /3.75 */
> +       VID_PLL_DIV(0x0ccc, 4, 4, 1),   /* 4/1  => /4 */
is the shift_sel (second parameter) correct here? the public S912
datasheet, page 77 states that CLK_SEL is only 2 bit wide (and "4"
exceeds that)

> +       VID_PLL_DIV(0x739c, 2, 5, 1),   /* 5/1  => /5 */
> +       VID_PLL_DIV(0x0e38, 0, 6, 1),   /* 6/1  => /6 */
> +       VID_PLL_DIV(0x0000, 3, 25, 4),  /* 25/4 => /6.25 */
> +       VID_PLL_DIV(0x3c78, 1, 7, 1),   /* 7/1  => /7 */
> +       VID_PLL_DIV(0x78f0, 2, 15, 2),  /* 15/2 => /7.5 */
> +       VID_PLL_DIV(0x0fc0, 0, 12, 1),  /* 12/1 => /12 */
> +       VID_PLL_DIV(0x3f80, 1, 14, 1),  /* 14/1 => /14 */
> +       VID_PLL_DIV(0x7f80, 2, 15, 1),  /* 15/1 => /15 */
> +};
> +
> +#define to_meson_vid_pll_div(_hw) container_of(_hw, struct meson_vid_pll_div, hw)
> +
> +const struct vid_pll_div *_get_table_val(unsigned int shift_val,
> +                                        unsigned int shift_sel)
> +{
> +       int i;
> +
> +       for (i = 0 ; i < ARRAY_SIZE(vid_pll_div_table) ; ++i) {
> +               if (vid_pll_div_table[i].shift_val == shift_val &&
> +                   vid_pll_div_table[i].shift_sel == shift_sel)
> +                       return &vid_pll_div_table[i];
> +       }
> +
> +       return NULL;
> +}
> +
> +static unsigned long meson_vid_pll_div_recalc_rate(struct clk_hw *hw,
> +                                                  unsigned long parent_rate)
> +{
> +       struct clk_regmap *clk = to_clk_regmap(hw);
> +       struct meson_vid_pll_div_data *pll_div = meson_vid_pll_div_data(clk);
> +       const struct vid_pll_div *div;
> +
> +       div = _get_table_val(meson_parm_read(clk->map, &pll_div->val),
> +                            meson_parm_read(clk->map, &pll_div->sel));
> +       if (!div || !div->frac_top) {
> +               pr_info("%s: Invalid config value for vid_pll_div\n", __func__);
> +               return parent_rate;
> +       }
> +
> +       return DIV_ROUND_UP_ULL(parent_rate * div->frac_bot, div->frac_top);
with the rename above this would read:
return DIV_ROUND_UP_ULL(parent_rate * div->multiplier, div->divider);


Regards
Martin



More information about the linux-amlogic mailing list