[PATCH v2 5/5] ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini

Neil Armstrong narmstrong at baylibre.com
Thu Jul 19 01:29:07 PDT 2018


On 14/07/2018 21:37, Martin Blumenstingl wrote:
> The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset.
> There are two variants:
> - 1 GiB or 2 GiB of DDR3 memory
> - 8 GB or 16 GB eMMC flash
> 
> Both variants come with:
> - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not
>   support Bluetooth)
> - an LED 7 segment display with an FD628 controller
> - HDMI and AV (CVBS) output
> - 2x USB (utilizing both USB ports provided by the SoC)
> - micro SD card slot
> - serial console (uart_AO) has to be soldered after opening the case

So it's 10/100 ethernet ? Only to confirm !

> 
> The board seems to be very similar to the P23x and Q20x reference
> boards, which is why it includes meson-gx-p23x-q20x.dtsi:
> - eMMC reset routed to BOOT_9
> - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference
>   clock is 32.768KHz on PWM_E
> - SD card detection is routed to CARD_6
> - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT)
> - uart_AO can be accessed after opening the case and soldering RX, TX
>   and GND lines onto the exposed solder points (marked with RX, TX and
>   GND)
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../dts/amlogic/meson-gxl-s905w-tx3-mini.dts  | 22 +++++++++++++++++++
>  2 files changed, 23 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index e55156dec237..a97c0e2d7bc6 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
> new file mode 100644
> index 000000000000..789c819c99c4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl at googlemail.com>.
> + * Based on meson-gxl-s905d-p231.dts:
> + * - Copyright (c) 2016 Endless Computers, Inc.
> + *   Author: Carlo Caione <carlo at endlessm.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxl-s905x.dtsi"
> +#include "meson-gx-p23x-q20x.dtsi"
> +
> +/ {
> +	compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
> +	model = "Oranth Tanix TX3 Mini";
> +
> +	memory at 0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
> +	};
> +};
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-amlogic mailing list