[PATCH RESEND 06/15] ASoC: meson: add axg spdif output

Jerome Brunet jbrunet at baylibre.com
Tue Jul 17 08:42:55 PDT 2018


Add support for the spdif output serializer of the axg SoC family

Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 sound/soc/meson/Kconfig        |   7 +
 sound/soc/meson/Makefile       |   2 +
 sound/soc/meson/axg-spdifout.c | 456 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 465 insertions(+)
 create mode 100644 sound/soc/meson/axg-spdifout.c

diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index 3916060edcae..9408214b5854 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -19,4 +19,11 @@ config SND_MESON_AXG_TODDR
 	  Select Y or M to add support for the frontend capture interfaces
 	  embedded in the Amlogic AXG SoC family
 
+config SND_MESON_AXG_SPDIFOUT
+	tristate "Amlogic AXG SPDIF Output Support"
+	imply SND_SOC_SPDIF
+	help
+	  Select Y or M to add support for SPDIF output serializer embedded
+	  in the Amlogic AXG SoC family
+
 endmenu
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index 12edf2db2a24..d51ae045ef08 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -3,7 +3,9 @@
 snd-soc-meson-axg-fifo-objs := axg-fifo.o
 snd-soc-meson-axg-frddr-objs := axg-frddr.o
 snd-soc-meson-axg-toddr-objs := axg-toddr.o
+snd-soc-meson-axg-spdifout-objs := axg-spdifout.o
 
 obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o
 obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o
 obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o
+obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o
diff --git a/sound/soc/meson/axg-spdifout.c b/sound/soc/meson/axg-spdifout.c
new file mode 100644
index 000000000000..9dea528053ad
--- /dev/null
+++ b/sound/soc/meson/axg-spdifout.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2018 BayLibre, SAS.
+// Author: Jerome Brunet <jbrunet at baylibre.com>
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/pcm_params.h>
+#include <sound/pcm_iec958.h>
+
+/*
+ * NOTE:
+ * The meaning of bits SPDIFOUT_CTRL0_XXX_SEL is actually the opposite
+ * of what the documentation says. Manual control on V, U and C bits is
+ * applied when the related sel bits are cleared
+ */
+
+#define SPDIFOUT_STAT			0x00
+#define SPDIFOUT_GAIN0			0x04
+#define SPDIFOUT_GAIN1			0x08
+#define SPDIFOUT_CTRL0			0x0c
+#define  SPDIFOUT_CTRL0_EN		BIT(31)
+#define  SPDIFOUT_CTRL0_RST_OUT		BIT(29)
+#define  SPDIFOUT_CTRL0_RST_IN		BIT(28)
+#define  SPDIFOUT_CTRL0_USEL		BIT(26)
+#define  SPDIFOUT_CTRL0_USET		BIT(25)
+#define  SPDIFOUT_CTRL0_CHSTS_SEL	BIT(24)
+#define  SPDIFOUT_CTRL0_DATA_SEL	BIT(20)
+#define  SPDIFOUT_CTRL0_MSB_FIRST	BIT(19)
+#define  SPDIFOUT_CTRL0_VSEL		BIT(18)
+#define  SPDIFOUT_CTRL0_VSET		BIT(17)
+#define  SPDIFOUT_CTRL0_MASK_MASK	GENMASK(11, 4)
+#define  SPDIFOUT_CTRL0_MASK(x)		((x) << 4)
+#define SPDIFOUT_CTRL1			0x10
+#define  SPDIFOUT_CTRL1_MSB_POS_MASK	GENMASK(12, 8)
+#define  SPDIFOUT_CTRL1_MSB_POS(x)	((x) << 8)
+#define  SPDIFOUT_CTRL1_TYPE_MASK	GENMASK(6, 4)
+#define  SPDIFOUT_CTRL1_TYPE(x)		((x) << 4)
+#define SPDIFOUT_PREAMB			0x14
+#define SPDIFOUT_SWAP			0x18
+#define SPDIFOUT_CHSTS0			0x1c
+#define SPDIFOUT_CHSTS1			0x20
+#define SPDIFOUT_CHSTS2			0x24
+#define SPDIFOUT_CHSTS3			0x28
+#define SPDIFOUT_CHSTS4			0x2c
+#define SPDIFOUT_CHSTS5			0x30
+#define SPDIFOUT_CHSTS6			0x34
+#define SPDIFOUT_CHSTS7			0x38
+#define SPDIFOUT_CHSTS8			0x3c
+#define SPDIFOUT_CHSTS9			0x40
+#define SPDIFOUT_CHSTSA			0x44
+#define SPDIFOUT_CHSTSB			0x48
+#define SPDIFOUT_MUTE_VAL		0x4c
+
+struct axg_spdifout {
+	struct regmap *map;
+	struct clk *mclk;
+	struct clk *pclk;
+};
+
+static void axg_spdifout_enable(struct regmap *map)
+{
+	/* Apply both reset */
+	regmap_update_bits(map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_RST_OUT | SPDIFOUT_CTRL0_RST_IN,
+			   0);
+
+	/* Clear out reset before in reset */
+	regmap_update_bits(map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_RST_OUT, SPDIFOUT_CTRL0_RST_OUT);
+	regmap_update_bits(map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_RST_IN,  SPDIFOUT_CTRL0_RST_IN);
+
+	/* Enable spdifout */
+	regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN,
+			   SPDIFOUT_CTRL0_EN);
+}
+
+static void axg_spdifout_disable(struct regmap *map)
+{
+	regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN, 0);
+}
+
+static int axg_spdifout_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		axg_spdifout_enable(priv->map);
+		return 0;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		axg_spdifout_disable(priv->map);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int axg_spdifout_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+
+	/* Use spdif valid bit to perform digital mute */
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_VSET,
+			   mute ? SPDIFOUT_CTRL0_VSET : 0);
+
+	return 0;
+}
+
+static int axg_spdifout_sample_fmt(struct snd_pcm_hw_params *params,
+				   struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+	unsigned int val;
+
+	/* Set the samples spdifout will pull from the FIFO */
+	switch (params_channels(params)) {
+	case 1:
+		val = SPDIFOUT_CTRL0_MASK(0x1);
+		break;
+	case 2:
+		val = SPDIFOUT_CTRL0_MASK(0x3);
+		break;
+	default:
+		dev_err(dai->dev, "too many channels for spdif dai: %u\n",
+			params_channels(params));
+		return -EINVAL;
+	}
+
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_MASK_MASK, val);
+
+	/* FIFO data are arranged in chunks of 64bits */
+	switch (params_physical_width(params)) {
+	case 8:
+		/* 8 samples of 8 bits */
+		val = SPDIFOUT_CTRL1_TYPE(0);
+		break;
+	case 16:
+		/* 4 samples of 16 bits - right justified */
+		val = SPDIFOUT_CTRL1_TYPE(2);
+		break;
+	case 32:
+		/* 2 samples of 32 bits - right justified */
+		val = SPDIFOUT_CTRL1_TYPE(4);
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported physical width: %u\n",
+			params_physical_width(params));
+		return -EINVAL;
+	}
+
+	/* Position of the MSB in FIFO samples */
+	val |= SPDIFOUT_CTRL1_MSB_POS(params_width(params) - 1);
+
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL1,
+			   SPDIFOUT_CTRL1_MSB_POS_MASK |
+			   SPDIFOUT_CTRL1_TYPE_MASK, val);
+
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL,
+			   0);
+
+	return 0;
+}
+
+static int axg_spdifout_set_chsts(struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+	unsigned int offset;
+	int ret;
+	u8 cs[4];
+	u32 val;
+
+	ret = snd_pcm_create_iec958_consumer_hw_params(params, cs, 4);
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+	val = cs[0] | cs[1] << 8 | cs[2] << 16 | cs[3] << 24;
+
+	/* Setup channel status A bits [31 - 0]*/
+	regmap_write(priv->map, SPDIFOUT_CHSTS0, val);
+
+	/* Clear channel status A bits [191 - 32] */
+	for (offset = SPDIFOUT_CHSTS1; offset <= SPDIFOUT_CHSTS5;
+	     offset += regmap_get_reg_stride(priv->map))
+		regmap_write(priv->map, offset, 0);
+
+	/* Setup channel status B bits [31 - 0]*/
+	regmap_write(priv->map, SPDIFOUT_CHSTS6, val);
+
+	/* Clear channel status B bits [191 - 32] */
+	for (offset = SPDIFOUT_CHSTS7; offset <= SPDIFOUT_CHSTSB;
+	     offset += regmap_get_reg_stride(priv->map))
+		regmap_write(priv->map, offset, 0);
+
+	return 0;
+}
+
+static int axg_spdifout_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+	unsigned int rate = params_rate(params);
+	int ret;
+
+	/* 2 * 32bits per subframe * 2 channels = 128 */
+	ret = clk_set_rate(priv->mclk, rate * 128);
+	if (ret) {
+		dev_err(dai->dev, "failed to set spdif clock\n");
+		return ret;
+	}
+
+	ret = axg_spdifout_sample_fmt(params, dai);
+	if (ret) {
+		dev_err(dai->dev, "failed to setup sample format\n");
+		return ret;
+	}
+
+	ret = axg_spdifout_set_chsts(params, dai);
+	if (ret) {
+		dev_err(dai->dev, "failed to setup channel status words\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int axg_spdifout_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+	int ret;
+
+	/* Clock the spdif output block */
+	ret = clk_prepare_enable(priv->pclk);
+	if (ret) {
+		dev_err(dai->dev, "failed to enable pclk\n");
+		return ret;
+	}
+
+	/* Make sure the block is initially stopped */
+	axg_spdifout_disable(priv->map);
+
+	/* Insert data from bit 27 lsb first */
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL,
+			   0);
+
+	/* Manual control of V, C and U, U = 0 */
+	regmap_update_bits(priv->map, SPDIFOUT_CTRL0,
+			   SPDIFOUT_CTRL0_CHSTS_SEL | SPDIFOUT_CTRL0_VSEL |
+			   SPDIFOUT_CTRL0_USEL | SPDIFOUT_CTRL0_USET,
+			   0);
+
+	/* Static SWAP configuration ATM */
+	regmap_write(priv->map, SPDIFOUT_SWAP, 0x10);
+
+	return 0;
+}
+
+static void axg_spdifout_shutdown(struct snd_pcm_substream *substream,
+				  struct snd_soc_dai *dai)
+{
+	struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai);
+
+	clk_disable_unprepare(priv->pclk);
+}
+
+static const struct snd_soc_dai_ops axg_spdifout_ops = {
+	.trigger	= axg_spdifout_trigger,
+	.digital_mute	= axg_spdifout_digital_mute,
+	.hw_params	= axg_spdifout_hw_params,
+	.startup	= axg_spdifout_startup,
+	.shutdown	= axg_spdifout_shutdown,
+};
+
+static struct snd_soc_dai_driver axg_spdifout_dai_drv[] = {
+	{
+		.name = "SPDIF Output",
+		.playback = {
+			.stream_name	= "Playback",
+			.channels_min	= 1,
+			.channels_max	= 2,
+			.rates		= (SNDRV_PCM_RATE_32000  |
+					   SNDRV_PCM_RATE_44100  |
+					   SNDRV_PCM_RATE_48000  |
+					   SNDRV_PCM_RATE_88200  |
+					   SNDRV_PCM_RATE_96000  |
+					   SNDRV_PCM_RATE_176400 |
+					   SNDRV_PCM_RATE_192000),
+			.formats	= (SNDRV_PCM_FMTBIT_S8     |
+					   SNDRV_PCM_FMTBIT_S16_LE |
+					   SNDRV_PCM_FMTBIT_S20_LE |
+					   SNDRV_PCM_FMTBIT_S24_LE),
+		},
+		.ops = &axg_spdifout_ops,
+	},
+};
+
+static const char * const spdifout_sel_texts[] = {
+	"IN 0", "IN 1", "IN 2",
+};
+
+static SOC_ENUM_SINGLE_DECL(axg_spdifout_sel_enum, SPDIFOUT_CTRL1, 24,
+			    spdifout_sel_texts);
+
+static const struct snd_kcontrol_new axg_spdifout_in_mux =
+	SOC_DAPM_ENUM("Input Source", axg_spdifout_sel_enum);
+
+static const struct snd_soc_dapm_widget axg_spdifout_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_spdifout_in_mux),
+};
+
+static const struct snd_soc_dapm_route axg_spdifout_dapm_routes[] = {
+	{ "SRC SEL", "IN 0", "IN 0" },
+	{ "SRC SEL", "IN 1", "IN 1" },
+	{ "SRC SEL", "IN 2", "IN 2" },
+	{ "Playback", NULL, "SRC SEL" },
+};
+
+static const struct snd_kcontrol_new axg_spdifout_controls[] = {
+	SOC_DOUBLE("Playback Volume", SPDIFOUT_GAIN0,  0,  8, 255, 0),
+	SOC_DOUBLE("Playback Switch", SPDIFOUT_CTRL0, 22, 21, 1, 1),
+	SOC_SINGLE("Playback Gain Enable Switch",
+		   SPDIFOUT_CTRL1, 26, 1, 0),
+	SOC_SINGLE("Playback Channels Mix Switch",
+		   SPDIFOUT_CTRL0, 23, 1, 0),
+};
+
+static int axg_spdifout_set_bias_level(struct snd_soc_component *component,
+				       enum snd_soc_bias_level level)
+{
+	struct axg_spdifout *priv = snd_soc_component_get_drvdata(component);
+	enum snd_soc_bias_level now =
+		snd_soc_component_get_bias_level(component);
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_PREPARE:
+		if (now == SND_SOC_BIAS_STANDBY)
+			ret = clk_prepare_enable(priv->mclk);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (now == SND_SOC_BIAS_PREPARE)
+			clk_disable_unprepare(priv->mclk);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+	case SND_SOC_BIAS_ON:
+		break;
+	}
+
+	return ret;
+}
+
+static const struct snd_soc_component_driver axg_spdifout_component_drv = {
+	.controls		= axg_spdifout_controls,
+	.num_controls		= ARRAY_SIZE(axg_spdifout_controls),
+	.dapm_widgets		= axg_spdifout_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(axg_spdifout_dapm_widgets),
+	.dapm_routes		= axg_spdifout_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(axg_spdifout_dapm_routes),
+	.set_bias_level		= axg_spdifout_set_bias_level,
+};
+
+static const struct regmap_config axg_spdifout_regmap_cfg = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= SPDIFOUT_MUTE_VAL,
+};
+
+static const struct of_device_id axg_spdifout_of_match[] = {
+	{ .compatible = "amlogic,axg-spdifout", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, axg_spdifout_of_match);
+
+static int axg_spdifout_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct axg_spdifout *priv;
+	struct resource *res;
+	void __iomem *regs;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifout_regmap_cfg);
+	if (IS_ERR(priv->map)) {
+		dev_err(dev, "failed to init regmap: %ld\n",
+			PTR_ERR(priv->map));
+		return PTR_ERR(priv->map);
+	}
+
+	priv->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->pclk)) {
+		ret = PTR_ERR(priv->pclk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get pclk: %d\n", ret);
+		return ret;
+	}
+
+	priv->mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(priv->mclk)) {
+		ret = PTR_ERR(priv->mclk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get mclk: %d\n", ret);
+		return ret;
+	}
+
+	return devm_snd_soc_register_component(dev, &axg_spdifout_component_drv,
+			axg_spdifout_dai_drv, ARRAY_SIZE(axg_spdifout_dai_drv));
+}
+
+static struct platform_driver axg_spdifout_pdrv = {
+	.probe = axg_spdifout_probe,
+	.driver = {
+		.name = "axg-spdifout",
+		.of_match_table = axg_spdifout_of_match,
+	},
+};
+module_platform_driver(axg_spdifout_pdrv);
+
+MODULE_DESCRIPTION("Amlogic AXG SPDIF Output driver");
+MODULE_AUTHOR("Jerome Brunet <jbrunet at baylibre.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.14.4




More information about the linux-amlogic mailing list