[PATCH 3/3] clk: meson-g12a: Add EE Clock controller driver

Jerome Brunet jbrunet at baylibre.com
Tue Jul 10 02:54:32 PDT 2018


On Tue, 2018-07-10 at 09:21 +0800, Yixun Lan wrote:
> HI Martin
> 
> 
> On 07/10/18 05:53, Martin Blumenstingl wrote:
> > On Mon, Jul 9, 2018 at 1:14 PM Jian Hu <jian.hu at amlogic.com> wrote:
> > > 
> > > Add a Clock driver for the Everyting-Else part
> > > of the Amlogic Meson-G12A SoC.
> > > 
> > > Signed-off-by: Jian Hu <jian.hu at amlogic.com>

This patch does not apply against git at github.com:BayLibre/clk-meson.git

Please rebase on top of the "next/drivers" branch.
Also please review the Kconfig part as changes have happened there.

> > > ---
> > >  drivers/clk/meson/Kconfig  |  10 +
> > >  drivers/clk/meson/Makefile |   1 +
> > >  drivers/clk/meson/g12a.c   | 992 +++++++++++++++++++++++++++++++++++++++++++++
> > >  drivers/clk/meson/g12a.h   | 123 ++++++
> > >  4 files changed, 1126 insertions(+)
> > >  create mode 100644 drivers/clk/meson/g12a.c
> > >  create mode 100644 drivers/clk/meson/g12a.h
> > > 
> > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> > > index d5cbec5..94a82f73 100644
> > > --- a/drivers/clk/meson/Kconfig
> > > +++ b/drivers/clk/meson/Kconfig
> > > @@ -36,3 +36,13 @@ config COMMON_CLK_AXG
> > >         help
> > >           Support for the clock controller on AmLogic A113D devices, aka axg.
> > >           Say Y if you want peripherals and CPU frequency scaling to work.
> > > +
> > > +config COMMON_CLK_G12A
> > > +       bool
> > > +       depends on COMMON_CLK_AMLOGIC
> > > +       select RESET_CONTROLLER
> > > +       select COMMON_CLK_REGMAP_MESON
> > > +       select MFD_SYSCON
> > > +       help
> > > +         Support for the clock controller on AmLogic U400 devices, aka g12a.

I suppose U400 is the designation of the ref design board, not the SoC, right ?
If this is case, please provide the SoC reference instead.

> > > +         Say Y if you want peripherals and CPU frequency scaling to work.
> > > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> > > index fa6d1e3..45d107c 100644
> > > --- a/drivers/clk/meson/Makefile
> > > +++ b/drivers/clk/meson/Makefile
> > > @@ -6,4 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
> > >  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> > >  obj-$(CONFIG_COMMON_CLK_GXBB)   += gxbb.o meson-aoclk.o gxbb-aoclk.o gxbb-aoclk-32k.o
> > >  obj-$(CONFIG_COMMON_CLK_AXG)    += axg.o meson-aoclk.o axg-aoclk.o
> > > +obj-$(CONFIG_COMMON_CLK_G12A)   += g12a.o
> > >  obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)  += clk-regmap.o
> > > diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> > > new file mode 100644
> > > index 0000000..3675697
> > > --- /dev/null
> > > +++ b/drivers/clk/meson/g12a.c
> > > @@ -0,0 +1,992 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * AmLogic Meson-G12A Clock Controller Driver

I thought you guys stopped writing amlogic with this camel case.
Please be consistent about it

> > > + *
> > > + * Copyright (c) 2016 Baylibre SAS.
> > > + * Author: Michael Turquette <mturquette at baylibre.com>
> > > + *
> > > + * Copyright (c) 2018 Amlogic, inc.
> > > + * Author: Jian Hu <jian.hu at amlogic.com>
> > > + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
> > > + */
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/clk-provider.h>
> > > +#include <linux/init.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/mfd/syscon.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#include "clkc.h"
> > > +#include "g12a.h"
> > > +
> > > +static DEFINE_SPINLOCK(meson_clk_lock);
> > > +
> > > +static struct clk_regmap g12a_fixed_pll = {
> > > +       .data = &(struct meson_clk_pll_data){
> > > +               .m = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL0,
> > > +                       .shift   = 0,
> > > +                       .width   = 8,
> > > +               },
> > > +               .n = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL0,
> > > +                       .shift   = 10,
> > > +                       .width   = 5,
> > > +               },
> > > +               .od = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL0,
> > > +                       .shift   = 16,
> > > +                       .width   = 2,
> > > +               },
> > > +               .frac = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL1,
> > > +                       .shift   = 0,
> > > +                       .width   = 19,
> > > +               },
> > > +               .l = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL0,
> > > +                       .shift   = 31,
> > > +                       .width   = 1,
> > > +               },
> > > +               .rst = {
> > > +                       .reg_off = HHI_FIX_PLL_CNTL0,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fixed_pll",
> > > +               .ops = &meson_clk_pll_ro_ops,
> > > +               .parent_names = (const char *[]){ "xtal" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static const struct reg_sequence g12a_sys_init_regs[] = {
> > > +       { .reg = HHI_SYS_PLL_CNTL1,     .def = 0x00000000 },
> > > +       { .reg = HHI_SYS_PLL_CNTL2,     .def = 0x00000000 },
> > > +       { .reg = HHI_SYS_PLL_CNTL3,     .def = 0x48681c00 },
> > > +       { .reg = HHI_SYS_PLL_CNTL4,     .def = 0x88770290 },
> > > +       { .reg = HHI_SYS_PLL_CNTL5,     .def = 0x39272000 },
> > > +       { .reg = HHI_SYS_PLL_CNTL6,     .def = 0x56540000 },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_sys_pll = {
> > > +       .data = &(struct meson_clk_pll_data){
> > > +               .m = {
> > > +                       .reg_off = HHI_SYS_PLL_CNTL0,
> > > +                       .shift   = 0,
> > > +                       .width   = 8,
> > > +               },
> > > +               .n = {
> > > +                       .reg_off = HHI_SYS_PLL_CNTL0,
> > > +                       .shift   = 10,
> > > +                       .width   = 5,
> > > +               },
> > > +               .od = {
> > > +                       .reg_off = HHI_SYS_PLL_CNTL0,
> > > +                       .shift   = 16,
> > > +                       .width   = 3,
> > > +               },
> > > +               .l = {
> > > +                       .reg_off = HHI_SYS_PLL_CNTL0,
> > > +                       .shift   = 31,
> > > +                       .width   = 1,
> > > +               },
> > > +               .rst = {
> > > +                       .reg_off = HHI_SYS_PLL_CNTL0,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .init_regs = g12a_sys_init_regs,
> > > +               .init_count = ARRAY_SIZE(g12a_sys_init_regs),
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "sys_pll",
> > > +               .ops = &meson_clk_pll_ro_ops,
> > > +               .parent_names = (const char *[]){ "xtal" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_GET_RATE_NOCACHE,
> > > +       },
> > > +};
> > > +
> > > +static const struct pll_rate_table g12a_gp0_pll_rate_table[] = {
> > > +       PLL_RATE(24000000,  128, 1, 7),
> > > +       PLL_RATE(48000000,  128, 1, 6),
> > > +       PLL_RATE(96000000,  128, 1, 5),
> > > +       PLL_RATE(192000000,  128, 1, 4),
> > > +       PLL_RATE(312000000,  208, 1, 4),
> > > +       PLL_RATE(408000000,  136, 1, 3),
> > > +       PLL_RATE(600000000,  200, 1, 3),
> > > +       PLL_RATE(696000000,  232, 1, 3),
> > > +       PLL_RATE(792000000,  132, 1, 2),
> > > +       PLL_RATE(846000000,  141, 1, 2),
> > > +       PLL_RATE(912000000,  152, 1, 2),
> > > +       PLL_RATE(1008000000, 168, 1, 2),
> > > +       PLL_RATE(1104000000, 184, 1, 2),
> > > +       PLL_RATE(1200000000, 200, 1, 2),
> > > +       PLL_RATE(1296000000, 216, 1, 2),
> > > +       PLL_RATE(1398000000, 233, 1, 2),
> > > +       PLL_RATE(1494000000, 249, 1, 2),
> > > +       PLL_RATE(1512000000, 126, 1, 1),
> > > +       PLL_RATE(1608000000, 134, 1, 1),
> > > +       PLL_RATE(1704000000, 142, 1, 1),
> > > +       PLL_RATE(1800000000, 150, 1, 1),
> > > +       PLL_RATE(1896000000, 158, 1, 1),
> > > +       PLL_RATE(1908000000, 159, 1, 1),
> > > +       PLL_RATE(1920000000, 160, 1, 1),
> > > +       PLL_RATE(2016000000, 168, 1, 1),
> > > +       PLL_RATE(2100000000, 175, 1, 1),
> > > +       PLL_RATE(2196000000, 183, 1, 1),
> > > +       PLL_RATE(2292000000, 191, 1, 1),
> > > +       PLL_RATE(2400000000, 200, 1, 1),
> > > +       PLL_RATE(2496000000, 208, 1, 1),
> > > +       PLL_RATE(2592000000, 216, 1, 1),
> > > +       PLL_RATE(2700000000, 225, 1, 1),
> > > +       PLL_RATE(2796000000, 233, 1, 1),
> > > +       PLL_RATE(2892000000, 241, 1, 1),
> > > +       PLL_RATE(3000000000, 125, 1, 0),
> > > +       PLL_RATE(3096000000, 129, 1, 0),
> > > +       PLL_RATE(3192000000, 133, 1, 0),
> > > +       PLL_RATE(3288000000, 137, 1, 0),
> > > +       PLL_RATE(3408000000, 142, 1, 0),
> > > +       PLL_RATE(3504000000, 146, 1, 0),
> > > +       PLL_RATE(3600000000, 150, 1, 0),
> > > +       PLL_RATE(3696000000, 154, 1, 0),
> > > +       PLL_RATE(3792000000, 158, 1, 0),
> > > +       PLL_RATE(3888000000, 162, 1, 0),
> > > +       PLL_RATE(4008000000, 167, 1, 0),
> > > +       PLL_RATE(4104000000, 171, 1, 0),
> > > +       PLL_RATE(4200000000, 175, 1, 0),
> > > +       PLL_RATE(4296000000, 179, 1, 0),
> > > +       PLL_RATE(4392000000, 183, 1, 0),
> > > +       PLL_RATE(4488000000, 187, 1, 0),
> > > +       PLL_RATE(4608000000, 192, 1, 0),
> > > +       PLL_RATE(4704000000, 196, 1, 0),
> > > +       PLL_RATE(4800000000, 200, 1, 0),
> > > +       PLL_RATE(4896000000, 204, 1, 0),
> > > +       PLL_RATE(4992000000, 208, 1, 0),
> > > +       PLL_RATE(5088000000, 212, 1, 0),
> > > +       PLL_RATE(5208000000, 217, 1, 0),
> > > +       PLL_RATE(5304000000, 221, 1, 0),
> > > +       PLL_RATE(5400000000, 225, 1, 0),
> > > +       PLL_RATE(5496000000, 229, 1, 0),
> > > +       PLL_RATE(5592000000, 233, 1, 0),
> > > +       PLL_RATE(5688000000, 237, 1, 0),
> > > +       PLL_RATE(5808000000, 242, 1, 0),
> > > +       PLL_RATE(5904000000, 246, 1, 0),
> > > +       PLL_RATE(6000000000, 250, 1, 0),
> > > +       { /* sentinel */ },
> > > +};
> > > +
> > > +static const struct reg_sequence g12a_gp0_init_regs[] = {
> > > +       { .reg = HHI_GP0_PLL_CNTL1,     .def = 0x00000000 },
> > > +       { .reg = HHI_GP0_PLL_CNTL2,     .def = 0x00000000 },
> > > +       { .reg = HHI_GP0_PLL_CNTL3,     .def = 0x48681c00 },
> > > +       { .reg = HHI_GP0_PLL_CNTL4,     .def = 0x33771290 },
> > > +       { .reg = HHI_GP0_PLL_CNTL5,     .def = 0x39272000 },
> > > +       { .reg = HHI_GP0_PLL_CNTL6,     .def = 0x56540000 },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_gp0_pll = {
> > > +       .data = &(struct meson_clk_pll_data){
> > > +               .m = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL0,
> > > +                       .shift   = 0,
> > > +                       .width   = 8,
> > > +               },
> > > +               .n = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL0,
> > > +                       .shift   = 10,
> > > +                       .width   = 5,
> > > +               },
> > > +               .od = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL0,
> > > +                       .shift   = 16,
> > > +                       .width   = 3,
> > > +               },
> > > +               .frac = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL1,
> > > +                       .shift   = 0,
> > > +                       .width   = 19,
> > > +               },
> > > +               .l = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL0,
> > > +                       .shift   = 31,
> > > +                       .width   = 1,
> > > +               },
> > > +               .rst = {
> > > +                       .reg_off = HHI_GP0_PLL_CNTL0,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .table = g12a_gp0_pll_rate_table,
> > > +               .init_regs = g12a_gp0_init_regs,
> > > +               .init_count = ARRAY_SIZE(g12a_gp0_init_regs),
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "gp0_pll",
> > > +               .ops = &meson_clk_pll_ops,
> > > +               .parent_names = (const char *[]){ "xtal" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static const struct reg_sequence g12a_hifi_init_regs[] = {
> > > +       { .reg = HHI_HIFI_PLL_CNTL1,    .def = 0x00000000 },
> > > +       { .reg = HHI_HIFI_PLL_CNTL2,    .def = 0x00000000 },
> > > +       { .reg = HHI_HIFI_PLL_CNTL3,    .def = 0x6a285c00 },
> > > +       { .reg = HHI_HIFI_PLL_CNTL4,    .def = 0x65771290 },
> > > +       { .reg = HHI_HIFI_PLL_CNTL5,    .def = 0x39272000 },
> > > +       { .reg = HHI_HIFI_PLL_CNTL6,    .def = 0x56540000 },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_hifi_pll = {
> > > +       .data = &(struct meson_clk_pll_data){
> > > +               .m = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL0,
> > > +                       .shift   = 0,
> > > +                       .width   = 8,
> > > +               },
> > > +               .n = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL0,
> > > +                       .shift   = 10,
> > > +                       .width   = 5,
> > > +               },
> > > +               .od = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL0,
> > > +                       .shift   = 16,
> > > +                       .width   = 2,
> > > +               },
> > > +               .frac = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL1,
> > > +                       .shift   = 0,
> > > +                       .width   = 19,
> > > +               },
> > > +               .l = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL0,
> > > +                       .shift   = 31,
> > > +                       .width   = 1,
> > > +               },
> > > +               .rst = {
> > > +                       .reg_off = HHI_HIFI_PLL_CNTL0,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .table = g12a_gp0_pll_rate_table,
> > > +               .init_regs = g12a_hifi_init_regs,
> > > +               .init_count = ARRAY_SIZE(g12a_hifi_init_regs),
> > > +               .flags = CLK_MESON_PLL_ROUND_CLOSEST,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "hifi_pll",
> > > +               .ops = &meson_clk_pll_ops,
> > > +               .parent_names = (const char *[]){ "xtal" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_fixed_factor g12a_fclk_div2 = {
> > > +       .mult = 1,
> > > +       .div = 2,
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fclk_div2",
> > > +               .ops = &clk_fixed_factor_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};

All the other SoC have gates in front of these fdivX clock.
It this SoC really different ?

> > > +
> > > +static struct clk_fixed_factor g12a_fclk_div3 = {
> > > +       .mult = 1,
> > > +       .div = 3,
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fclk_div3",
> > > +               .ops = &clk_fixed_factor_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_fixed_factor g12a_fclk_div4 = {
> > > +       .mult = 1,
> > > +       .div = 4,
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fclk_div4",
> > > +               .ops = &clk_fixed_factor_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_fixed_factor g12a_fclk_div5 = {
> > > +       .mult = 1,
> > > +       .div = 5,
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fclk_div5",
> > > +               .ops = &clk_fixed_factor_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_fixed_factor g12a_fclk_div7 = {
> > > +       .mult = 1,
> > > +       .div = 7,
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "fclk_div7",
> > > +               .ops = &clk_fixed_factor_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll0_div = {
> > > +       .data = &(struct meson_clk_mpll_data){
> > > +               .sdm = {
> > > +                       .reg_off = HHI_MPLL_CNTL1,
> > > +                       .shift   = 0,
> > > +                       .width   = 14,
> > > +               },
> > > +               .sdm_en = {
> > > +                       .reg_off = HHI_MPLL_CNTL1,
> > > +                       .shift   = 30,
> > > +                       .width   = 1,
> > > +               },
> > > +               .n2 = {
> > > +                       .reg_off = HHI_MPLL_CNTL1,
> > > +                       .shift   = 20,
> > > +                       .width   = 9,
> > > +               },
> > > +               .ssen = {
> > > +                       .reg_off = HHI_MPLL_CNTL1,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .lock = &meson_clk_lock,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll0_div",
> > > +               .ops = &meson_clk_mpll_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll0 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_MPLL_CNTL1,
> > > +               .bit_idx = 31,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll0",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "mpll0_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};

The previous had a predivider (1 or 2) in front of these mpll. Even if the
predivider is usually set to be a passthrough, it is better to model the tree
correctly.

Is this SoC any different ?

> > > +
> > > +static struct clk_regmap g12a_mpll1_div = {
> > > +       .data = &(struct meson_clk_mpll_data){
> > > +               .sdm = {
> > > +                       .reg_off = HHI_MPLL_CNTL3,
> > > +                       .shift   = 0,
> > > +                       .width   = 14,
> > > +               },
> > > +               .sdm_en = {
> > > +                       .reg_off = HHI_MPLL_CNTL3,
> > > +                       .shift   = 30,
> > > +                       .width   = 1,
> > > +               },
> > > +               .n2 = {
> > > +                       .reg_off = HHI_MPLL_CNTL3,
> > > +                       .shift   = 20,
> > > +                       .width   = 9,
> > > +               },
> > > +               .ssen = {
> > > +                       .reg_off = HHI_MPLL_CNTL3,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .lock = &meson_clk_lock,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll1_div",
> > > +               .ops = &meson_clk_mpll_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll1 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_MPLL_CNTL3,
> > > +               .bit_idx = 31,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll1",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "mpll1_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll2_div = {
> > > +       .data = &(struct meson_clk_mpll_data){
> > > +               .sdm = {
> > > +                       .reg_off = HHI_MPLL_CNTL5,
> > > +                       .shift   = 0,
> > > +                       .width   = 14,
> > > +               },
> > > +               .sdm_en = {
> > > +                       .reg_off = HHI_MPLL_CNTL5,
> > > +                       .shift   = 30,
> > > +                       .width   = 1,
> > > +               },
> > > +               .n2 = {
> > > +                       .reg_off = HHI_MPLL_CNTL5,
> > > +                       .shift   = 20,
> > > +                       .width   = 9,
> > > +               },
> > > +               .ssen = {
> > > +                       .reg_off = HHI_MPLL_CNTL5,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .lock = &meson_clk_lock,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll2_div",
> > > +               .ops = &meson_clk_mpll_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll2 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_MPLL_CNTL5,
> > > +               .bit_idx = 31,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll2",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "mpll2_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll3_div = {
> > > +       .data = &(struct meson_clk_mpll_data){
> > > +               .sdm = {
> > > +                       .reg_off = HHI_MPLL_CNTL7,
> > > +                       .shift   = 0,
> > > +                       .width   = 14,
> > > +               },
> > > +               .sdm_en = {
> > > +                       .reg_off = HHI_MPLL_CNTL7,
> > > +                       .shift   = 30,
> > > +                       .width   = 1,
> > > +               },
> > > +               .n2 = {
> > > +                       .reg_off = HHI_MPLL_CNTL7,
> > > +                       .shift   = 20,
> > > +                       .width   = 9,
> > > +               },
> > > +               .ssen = {
> > > +                       .reg_off = HHI_MPLL_CNTL7,
> > > +                       .shift   = 29,
> > > +                       .width   = 1,
> > > +               },
> > > +               .lock = &meson_clk_lock,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll3_div",
> > > +               .ops = &meson_clk_mpll_ops,
> > > +               .parent_names = (const char *[]){ "fixed_pll" },
> > > +               .num_parents = 1,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpll3 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_MPLL_CNTL7,
> > > +               .bit_idx = 31,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpll3",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "mpll3_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static u32 mux_table_clk81[]   = { 0, 2, 3, 4, 5, 6, 7 };
> > > +static const char * const clk81_parent_names[] = {
> > > +       "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
> > > +       "fclk_div3", "fclk_div5"
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpeg_clk_sel = {
> > > +       .data = &(struct clk_regmap_mux_data){
> > > +               .offset = HHI_MPEG_CLK_CNTL,
> > > +               .mask = 0x7,
> > > +               .shift = 12,
> > > +               .table = mux_table_clk81,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpeg_clk_sel",
> > > +               .ops = &clk_regmap_mux_ro_ops,
> > > +               .parent_names = clk81_parent_names,
> > > +               .num_parents = ARRAY_SIZE(clk81_parent_names),
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_mpeg_clk_div = {
> > > +       .data = &(struct clk_regmap_div_data){
> > > +               .offset = HHI_MPEG_CLK_CNTL,
> > > +               .shift = 0,
> > > +               .width = 7,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "mpeg_clk_div",
> > > +               .ops = &clk_regmap_divider_ops,
> > > +               .parent_names = (const char *[]){ "mpeg_clk_sel" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_clk81 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_MPEG_CLK_CNTL,
> > > +               .bit_idx = 7,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "clk81",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "mpeg_clk_div" },
> > > +               .num_parents = 1,
> > > +               .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
> > > +       },
> > > +};
> > > +
> > > +static const char * const g12a_sd_emmc_clk0_parent_names[] = {
> > > +       "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
> > > +
> > > +       /*
> > > +        * Following these parent clocks, we should also have had mpll2, mpll3
> > > +        * and gp0_pll but these clocks are too precious to be used here. All
> > > +        * the necessary rates for MMC and NAND operation can be acheived using
> > > +        * xtal or fclk_div clocks
> > > +        */
> > > +};
> > > +
> > > +/* SDcard clock */
> > > +static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
> > > +       .data = &(struct clk_regmap_mux_data){
> > > +               .offset = HHI_SD_EMMC_CLK_CNTL,
> > > +               .mask = 0x7,
> > > +               .shift = 25,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data) {
> > > +               .name = "sd_emmc_b_clk0_sel",
> > > +               .ops = &clk_regmap_mux_ops,
> > > +               .parent_names = g12a_sd_emmc_clk0_parent_names,
> > > +               .num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
> > > +       .data = &(struct clk_regmap_div_data){
> > > +               .offset = HHI_SD_EMMC_CLK_CNTL,
> > > +               .shift = 16,
> > > +               .width = 7,
> > > +               .flags = CLK_DIVIDER_ROUND_CLOSEST,

If we really want to "round closest", maybe we should throw
CLK_MUX_ROUND_CLOSEST to the parent mux as well.

I suppose this something we should fix in other SoC drivers as well.
What do you think about it Jian ?

> > > +       },
> > > +       .hw.init = &(struct clk_init_data) {
> > > +               .name = "sd_emmc_b_clk0_div",
> > > +               .ops = &clk_regmap_divider_ops,
> > > +               .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_sd_emmc_b_clk0 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_SD_EMMC_CLK_CNTL,
> > > +               .bit_idx = 23,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "sd_emmc_b_clk0",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +/* EMMC/NAND clock */
> > > +static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
> > > +       .data = &(struct clk_regmap_mux_data){
> > > +               .offset = HHI_NAND_CLK_CNTL,
> > > +               .mask = 0x7,
> > > +               .shift = 9,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data) {
> > > +               .name = "sd_emmc_c_clk0_sel",
> > > +               .ops = &clk_regmap_mux_ops,
> > > +               .parent_names = g12a_sd_emmc_clk0_parent_names,
> > > +               .num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
> > > +       .data = &(struct clk_regmap_div_data){
> > > +               .offset = HHI_NAND_CLK_CNTL,
> > > +               .shift = 0,
> > > +               .width = 7,
> > > +               .flags = CLK_DIVIDER_ROUND_CLOSEST,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data) {
> > > +               .name = "sd_emmc_c_clk0_div",
> > > +               .ops = &clk_regmap_divider_ops,
> > > +               .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +static struct clk_regmap g12a_sd_emmc_c_clk0 = {
> > > +       .data = &(struct clk_regmap_gate_data){
> > > +               .offset = HHI_NAND_CLK_CNTL,
> > > +               .bit_idx = 7,
> > > +       },
> > > +       .hw.init = &(struct clk_init_data){
> > > +               .name = "sd_emmc_c_clk0",
> > > +               .ops = &clk_regmap_gate_ops,
> > > +               .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
> > > +               .num_parents = 1,
> > > +               .flags = CLK_SET_RATE_PARENT,
> > > +       },
> > > +};
> > > +
> > > +/* Everything Else (EE) domain gates */
> > > +static MESON_GATE(g12a_ddr, HHI_GCLK_MPEG0, 0);
> > > +static MESON_GATE(g12a_dos, HHI_GCLK_MPEG0, 1);
> > > +static MESON_GATE(g12a_audio_locker, HHI_GCLK_MPEG0, 2);
> > > +static MESON_GATE(g12a_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
> > > +static MESON_GATE(g12a_eth_phy, HHI_GCLK_MPEG0, 4);
> > > +static MESON_GATE(g12a_isa, HHI_GCLK_MPEG0, 5);
> > > +static MESON_GATE(g12a_pl301, HHI_GCLK_MPEG0, 6);
> > > +static MESON_GATE(g12a_periphs, HHI_GCLK_MPEG0, 7);
> > > +static MESON_GATE(g12a_spicc_0, HHI_GCLK_MPEG0, 8);
> > > +static MESON_GATE(g12a_i2c, HHI_GCLK_MPEG0, 9);
> > > +static MESON_GATE(g12a_sana, HHI_GCLK_MPEG0, 10);
> > > +static MESON_GATE(g12a_sd, HHI_GCLK_MPEG0, 11);
> > > +static MESON_GATE(g12a_rng0, HHI_GCLK_MPEG0, 12);
> > > +static MESON_GATE(g12a_uart0, HHI_GCLK_MPEG0, 13);
> > > +static MESON_GATE(g12a_spicc_1, HHI_GCLK_MPEG0, 14);
> > > +static MESON_GATE(g12a_hiu_reg, HHI_GCLK_MPEG0, 19);
> > > +static MESON_GATE(g12a_mipi_dsi_phy, HHI_GCLK_MPEG0, 20);
> > > +static MESON_GATE(g12a_assist_misc, HHI_GCLK_MPEG0, 23);
> > > +static MESON_GATE(g12a_emmc_a, HHI_GCLK_MPEG0, 24);
> > > +static MESON_GATE(g12a_emmc_b, HHI_GCLK_MPEG0, 25);
> > > +static MESON_GATE(g12a_emmc_c, HHI_GCLK_MPEG0, 26);
> > > +static MESON_GATE(g12a_audio_codec, HHI_GCLK_MPEG0, 28);
> > > +
> > > +static MESON_GATE(g12a_audio, HHI_GCLK_MPEG1, 0);
> > > +static MESON_GATE(g12a_eth_core, HHI_GCLK_MPEG1, 3);
> > > +static MESON_GATE(g12a_demux, HHI_GCLK_MPEG1, 4);
> > > +static MESON_GATE(g12a_audio_ififo, HHI_GCLK_MPEG1, 11);
> > > +static MESON_GATE(g12a_adc, HHI_GCLK_MPEG1, 13);
> > > +static MESON_GATE(g12a_uart1, HHI_GCLK_MPEG1, 16);
> > > +static MESON_GATE(g12a_g2d, HHI_GCLK_MPEG1, 20);
> > > +static MESON_GATE(g12a_reset, HHI_GCLK_MPEG1, 23);
> > > +static MESON_GATE(g12a_pcie_comb, HHI_GCLK_MPEG1, 24);
> > > +static MESON_GATE(g12a_parser, HHI_GCLK_MPEG1, 25);
> > > +static MESON_GATE(g12a_usb_general, HHI_GCLK_MPEG1, 26);
> > > +static MESON_GATE(g12a_pcie_phy, HHI_GCLK_MPEG1, 27);
> > > +static MESON_GATE(g12a_ahb_arb0, HHI_GCLK_MPEG1, 29);
> > > +
> > > +static MESON_GATE(g12a_ahb_data_bus, HHI_GCLK_MPEG2, 1);
> > > +static MESON_GATE(g12a_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
> > > +static MESON_GATE(g12a_htx_hdcp22, HHI_GCLK_MPEG2, 3);
> > > +static MESON_GATE(g12a_htx_pclk, HHI_GCLK_MPEG2, 4);
> > > +static MESON_GATE(g12a_bt656, HHI_GCLK_MPEG2, 6);
> > > +static MESON_GATE(g12a_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
> > > +static MESON_GATE(g12a_mmc_pclk, HHI_GCLK_MPEG2, 11);
> > > +static MESON_GATE(g12a_uart2, HHI_GCLK_MPEG2, 15);
> > > +static MESON_GATE(g12a_vpu_intr, HHI_GCLK_MPEG2, 25);
> > > +static MESON_GATE(g12a_gic, HHI_GCLK_MPEG2, 30);
> > > +
> > > +static MESON_GATE(g12a_vclk2_venci0, HHI_GCLK_OTHER, 1);
> > > +static MESON_GATE(g12a_vclk2_venci1, HHI_GCLK_OTHER, 2);
> > > +static MESON_GATE(g12a_vclk2_vencp0, HHI_GCLK_OTHER, 3);
> > > +static MESON_GATE(g12a_vclk2_vencp1, HHI_GCLK_OTHER, 4);
> > > +static MESON_GATE(g12a_vclk2_venct0, HHI_GCLK_OTHER, 5);
> > > +static MESON_GATE(g12a_vclk2_venct1, HHI_GCLK_OTHER, 6);
> > > +static MESON_GATE(g12a_vclk2_other, HHI_GCLK_OTHER, 7);
> > > +static MESON_GATE(g12a_vclk2_enci, HHI_GCLK_OTHER, 8);
> > > +static MESON_GATE(g12a_vclk2_encp, HHI_GCLK_OTHER, 9);
> > > +static MESON_GATE(g12a_dac_clk, HHI_GCLK_OTHER, 10);
> > > +static MESON_GATE(g12a_aoclk_gate, HHI_GCLK_OTHER, 14);
> > > +static MESON_GATE(g12a_iec958_gate, HHI_GCLK_OTHER, 16);
> > > +static MESON_GATE(g12a_enc480p, HHI_GCLK_OTHER, 20);
> > > +static MESON_GATE(g12a_rng1, HHI_GCLK_OTHER, 21);
> > > +static MESON_GATE(g12a_vclk2_enct, HHI_GCLK_OTHER, 22);
> > > +static MESON_GATE(g12a_vclk2_encl, HHI_GCLK_OTHER, 23);
> > > +static MESON_GATE(g12a_vclk2_venclmmc, HHI_GCLK_OTHER, 24);
> > > +static MESON_GATE(g12a_vclk2_vencl, HHI_GCLK_OTHER, 25);
> > > +static MESON_GATE(g12a_vclk2_other1, HHI_GCLK_OTHER, 26);
> > > +
> > > +/* Array of all clocks provided by this provider */
> > > +
> > > +static struct clk_hw_onecell_data g12a_hw_onecell_data = {
> > > +       .hws = {
> > > +               [CLKID_SYS_PLL]                 = &g12a_sys_pll.hw,
> > > +               [CLKID_FIXED_PLL]               = &g12a_fixed_pll.hw,
> > > +               [CLKID_FCLK_DIV2]               = &g12a_fclk_div2.hw,
> > > +               [CLKID_FCLK_DIV3]               = &g12a_fclk_div3.hw,
> > > +               [CLKID_FCLK_DIV4]               = &g12a_fclk_div4.hw,
> > > +               [CLKID_FCLK_DIV5]               = &g12a_fclk_div5.hw,
> > > +               [CLKID_FCLK_DIV7]               = &g12a_fclk_div7.hw,
> > > +               [CLKID_GP0_PLL]                 = &g12a_gp0_pll.hw,
> > > +               [CLKID_MPEG_SEL]                = &g12a_mpeg_clk_sel.hw,
> > > +               [CLKID_MPEG_DIV]                = &g12a_mpeg_clk_div.hw,
> > > +               [CLKID_CLK81]                   = &g12a_clk81.hw,
> > > +               [CLKID_MPLL0]                   = &g12a_mpll0.hw,
> > > +               [CLKID_MPLL1]                   = &g12a_mpll1.hw,
> > > +               [CLKID_MPLL2]                   = &g12a_mpll2.hw,
> > > +               [CLKID_MPLL3]                   = &g12a_mpll3.hw,
> > > +               [CLKID_DDR]                     = &g12a_ddr.hw,
> > > +               [CLKID_DOS]                     = &g12a_dos.hw,
> > > +               [CLKID_AUDIO_LOCKER]            = &g12a_audio_locker.hw,
> > > +               [CLKID_MIPI_DSI_HOST]           = &g12a_mipi_dsi_host.hw,
> > > +               [CLKID_ETH_PHY]                 = &g12a_eth_phy.hw,
> > > +               [CLKID_ISA]                     = &g12a_isa.hw,
> > > +               [CLKID_PL301]                   = &g12a_pl301.hw,
> > > +               [CLKID_PERIPHS]                 = &g12a_periphs.hw,
> > > +               [CLKID_SPICC0]                  = &g12a_spicc_0.hw,
> > > +               [CLKID_I2C]                     = &g12a_i2c.hw,
> > > +               [CLKID_SANA]                    = &g12a_sana.hw,
> > > +               [CLKID_SD]                      = &g12a_sd.hw,
> > > +               [CLKID_RNG0]                    = &g12a_rng0.hw,
> > > +               [CLKID_UART0]                   = &g12a_uart0.hw,
> > > +               [CLKID_SPICC1]                  = &g12a_spicc_1.hw,
> > > +               [CLKID_HIU_IFACE]               = &g12a_hiu_reg.hw,
> > > +               [CLKID_MIPI_DSI_PHY]            = &g12a_mipi_dsi_phy.hw,
> > > +               [CLKID_ASSIST_MISC]             = &g12a_assist_misc.hw,
> > > +               [CLKID_SD_EMMC_A]               = &g12a_emmc_a.hw,
> > > +               [CLKID_SD_EMMC_B]               = &g12a_emmc_b.hw,
> > > +               [CLKID_SD_EMMC_C]               = &g12a_emmc_c.hw,
> > > +               [CLKID_AUDIO_CODEC]             = &g12a_audio_codec.hw,
> > > +               [CLKID_AUDIO]                   = &g12a_audio.hw,
> > > +               [CLKID_ETH]                     = &g12a_eth_core.hw,
> > > +               [CLKID_DEMUX]                   = &g12a_demux.hw,
> > > +               [CLKID_AUDIO_IFIFO]             = &g12a_audio_ififo.hw,
> > > +               [CLKID_ADC]                     = &g12a_adc.hw,
> > > +               [CLKID_UART1]                   = &g12a_uart1.hw,
> > > +               [CLKID_G2D]                     = &g12a_g2d.hw,
> > > +               [CLKID_RESET]                   = &g12a_reset.hw,
> > > +               [CLKID_PCIE_COMB]               = &g12a_pcie_comb.hw,
> > > +               [CLKID_PARSER]                  = &g12a_parser.hw,
> > > +               [CLKID_USB]                     = &g12a_usb_general.hw,
> > > +               [CLKID_PCIE_PHY]                = &g12a_pcie_phy.hw,
> > > +               [CLKID_AHB_ARB0]                = &g12a_ahb_arb0.hw,
> > > +               [CLKID_AHB_DATA_BUS]            = &g12a_ahb_data_bus.hw,
> > > +               [CLKID_AHB_CTRL_BUS]            = &g12a_ahb_ctrl_bus.hw,
> > > +               [CLKID_HTX_HDCP22]              = &g12a_htx_hdcp22.hw,
> > > +               [CLKID_HTX_PCLK]                = &g12a_htx_pclk.hw,
> > > +               [CLKID_BT656]                   = &g12a_bt656.hw,
> > > +               [CLKID_USB1_DDR_BRIDGE]         = &g12a_usb1_to_ddr.hw,
> > > +               [CLKID_MMC_PCLK]                = &g12a_mmc_pclk.hw,
> > > +               [CLKID_UART2]                   = &g12a_uart2.hw,
> > > +               [CLKID_VPU_INTR]                = &g12a_vpu_intr.hw,
> > > +               [CLKID_GIC]                     = &g12a_gic.hw,
> > > +               [CLKID_SD_EMMC_B_CLK0_SEL]      = &g12a_sd_emmc_b_clk0_sel.hw,
> > > +               [CLKID_SD_EMMC_B_CLK0_DIV]      = &g12a_sd_emmc_b_clk0_div.hw,
> > > +               [CLKID_SD_EMMC_B_CLK0]          = &g12a_sd_emmc_b_clk0.hw,
> > > +               [CLKID_SD_EMMC_C_CLK0_SEL]      = &g12a_sd_emmc_c_clk0_sel.hw,
> > > +               [CLKID_SD_EMMC_C_CLK0_DIV]      = &g12a_sd_emmc_c_clk0_div.hw,
> > > +               [CLKID_SD_EMMC_C_CLK0]          = &g12a_sd_emmc_c_clk0.hw,
> > > +               [CLKID_MPLL0_DIV]               = &g12a_mpll0_div.hw,
> > > +               [CLKID_MPLL1_DIV]               = &g12a_mpll1_div.hw,
> > > +               [CLKID_MPLL2_DIV]               = &g12a_mpll2_div.hw,
> > > +               [CLKID_MPLL3_DIV]               = &g12a_mpll3_div.hw,
> > > +               [CLKID_HIFI_PLL]                = &g12a_hifi_pll.hw,
> > > +               [CLKID_VCLK2_VENCI0]            = &g12a_vclk2_venci0.hw,
> > > +               [CLKID_VCLK2_VENCI1]            = &g12a_vclk2_venci1.hw,
> > > +               [CLKID_VCLK2_VENCP0]            = &g12a_vclk2_vencp0.hw,
> > > +               [CLKID_VCLK2_VENCP1]            = &g12a_vclk2_vencp1.hw,
> > > +               [CLKID_VCLK2_VENCT0]            = &g12a_vclk2_venct0.hw,
> > > +               [CLKID_VCLK2_VENCT1]            = &g12a_vclk2_venct1.hw,
> > > +               [CLKID_VCLK2_OTHER]             = &g12a_vclk2_other.hw,
> > > +               [CLKID_VCLK2_ENCI]              = &g12a_vclk2_enci.hw,
> > > +               [CLKID_VCLK2_ENCP]              = &g12a_vclk2_encp.hw,
> > > +               [CLKID_DAC_CLK]                 = &g12a_dac_clk.hw,
> > > +               [CLKID_AOCLK]                   = &g12a_aoclk_gate.hw,
> > > +               [CLKID_IEC958]                  = &g12a_iec958_gate.hw,
> > > +               [CLKID_ENC480P]                 = &g12a_enc480p.hw,
> > > +               [CLKID_RNG1]                    = &g12a_rng1.hw,
> > > +               [CLKID_VCLK2_ENCT]              = &g12a_vclk2_enct.hw,
> > > +               [CLKID_VCLK2_ENCL]              = &g12a_vclk2_encl.hw,
> > > +               [CLKID_VCLK2_VENCLMMC]          = &g12a_vclk2_venclmmc.hw,
> > > +               [CLKID_VCLK2_VENCL]             = &g12a_vclk2_vencl.hw,
> > > +               [CLKID_VCLK2_OTHER1]            = &g12a_vclk2_other1.hw,
> > > +               [NR_CLKS]                       = NULL,
> > > +       },
> > > +       .num = NR_CLKS,
> > > +};
> > > +
> > > +/* Convenience table to populate regmap in .probe */
> > > +static struct clk_regmap *const g12a_clk_regmaps[] = {
> > > +       &g12a_clk81,
> > > +       &g12a_dos,
> > > +       &g12a_ddr,
> > > +       &g12a_audio_locker,
> > > +       &g12a_mipi_dsi_host,
> > > +       &g12a_eth_phy,
> > > +       &g12a_isa,
> > > +       &g12a_pl301,
> > > +       &g12a_periphs,
> > > +       &g12a_spicc_0,
> > > +       &g12a_i2c,
> > > +       &g12a_sana,
> > > +       &g12a_sd,
> > > +       &g12a_rng0,
> > > +       &g12a_uart0,
> > > +       &g12a_spicc_1,
> > > +       &g12a_hiu_reg,
> > > +       &g12a_mipi_dsi_phy,
> > > +       &g12a_assist_misc,
> > > +       &g12a_emmc_a,
> > > +       &g12a_emmc_b,
> > > +       &g12a_emmc_c,
> > > +       &g12a_audio_codec,
> > > +       &g12a_audio,
> > > +       &g12a_eth_core,
> > > +       &g12a_demux,
> > > +       &g12a_audio_ififo,
> > > +       &g12a_adc,
> > > +       &g12a_uart1,
> > > +       &g12a_g2d,
> > > +       &g12a_reset,
> > > +       &g12a_pcie_comb,
> > > +       &g12a_parser,
> > > +       &g12a_usb_general,
> > > +       &g12a_pcie_phy,
> > > +       &g12a_ahb_arb0,
> > > +       &g12a_ahb_data_bus,
> > > +       &g12a_ahb_ctrl_bus,
> > > +       &g12a_htx_hdcp22,
> > > +       &g12a_htx_pclk,
> > > +       &g12a_bt656,
> > > +       &g12a_usb1_to_ddr,
> > > +       &g12a_mmc_pclk,
> > > +       &g12a_vpu_intr,
> > > +       &g12a_gic,
> > > +       &g12a_sd_emmc_b_clk0,
> > > +       &g12a_sd_emmc_c_clk0,
> > > +       &g12a_mpeg_clk_div,
> > > +       &g12a_sd_emmc_b_clk0_div,
> > > +       &g12a_sd_emmc_c_clk0_div,
> > > +       &g12a_mpeg_clk_sel,
> > > +       &g12a_sd_emmc_b_clk0_sel,
> > > +       &g12a_sd_emmc_c_clk0_sel,
> > > +       &g12a_mpll0,
> > > +       &g12a_mpll1,
> > > +       &g12a_mpll2,
> > > +       &g12a_mpll3,
> > > +       &g12a_mpll0_div,
> > > +       &g12a_mpll1_div,
> > > +       &g12a_mpll2_div,
> > > +       &g12a_mpll3_div,
> > > +       &g12a_fixed_pll,
> > > +       &g12a_sys_pll,
> > > +       &g12a_gp0_pll,
> > > +       &g12a_hifi_pll,
> > > +       &g12a_vclk2_venci0,
> > > +       &g12a_vclk2_venci1,
> > > +       &g12a_vclk2_vencp0,
> > > +       &g12a_vclk2_vencp1,
> > > +       &g12a_vclk2_venct0,
> > > +       &g12a_vclk2_venct1,
> > > +       &g12a_vclk2_other,
> > > +       &g12a_vclk2_enci,
> > > +       &g12a_vclk2_encp,
> > > +       &g12a_dac_clk,
> > > +       &g12a_aoclk_gate,
> > > +       &g12a_iec958_gate,
> > > +       &g12a_enc480p,
> > > +       &g12a_rng1,
> > > +       &g12a_vclk2_enct,
> > > +       &g12a_vclk2_encl,
> > > +       &g12a_vclk2_venclmmc,
> > > +       &g12a_vclk2_vencl,
> > > +       &g12a_vclk2_other1,
> > > +};
> > > +
> > > +static const struct of_device_id clkc_match_table[] = {
> > > +       { .compatible = "amlogic,g12a-clkc" },
> > 
> > I wonder if that should be "amlogic,meson-g12a-clkc" (I know that AXG
> > and GXBB/GXL/GXM omit the "meson-" prefix, but I am not sure if that's
> > correct - I'll CC Rob Herring on the dt-bindings patch)
> > 
> 
> we're fine with either way, since the g12a is recently new added SoC.
> 
> but I guess those old compatibles which already exist won't be changed,
> as it will break the DT

Yes, I doubt we are going to change the compatibles. With or without the meson
prefix, I suppose it going to stay that way.

It is worth thinking about it for new drivers though.
We already have the "amlogic,", so do we really to prefix even more with "meson-
"

Also, if we were really strict about that scheme, should meson8b compatible be

"amlogic,meson-meson8b-foo-bar" ... the SoC is meson8b, not just 8b after all ?

For the particular case of the clock controller, I don't care very much, as long
as the compatible is coherent with documentation.

I might have a preference for the current compatible ... just for consistency
with the other clock controllers.

> 
> > > +       {}
> > > +};
> > > +
> > > +static const struct regmap_config clkc_regmap_config = {
> > > +       .reg_bits       = 32,
> > > +       .val_bits       = 32,
> > > +       .reg_stride     = 4,
> > > +};
> > > +
> > > +static int g12a_clkc_probe(struct platform_device *pdev)
> > > +{
> > > +       struct device *dev = &pdev->dev;
> > > +       struct regmap *map;
> > > +       int ret, i;
> > > +
> > > +       /* Get the hhi system controller node if available */
> > > +       map = syscon_node_to_regmap(of_get_parent(dev->of_node));
> > > +       if (IS_ERR(map)) {
> > > +               dev_err(dev,
> > > +                       "failed to get HHI regmap - Trying obsolete regs\n");
> > 
> > this message doesn't seem right - there's no code for the "obsolete
> > regs" (which shouldn't be used by a new driver anyways)
> > 
> 
> oh, this is definitely need to be fixed (guess it's a copy & paste issue)
> thanks for catching this, martin!

Yes, copy/paste for sure !

> 
> > > +               return PTR_ERR(map);
> > > +       }
> > > +
> > > +       /* Populate regmap for the regmap backed clocks */
> > > +       for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
> > > +               g12a_clk_regmaps[i]->map = map;
> > > +
> > > +       for (i = 0; i < g12a_hw_onecell_data.num; i++) {
> > > +               /* array might be sparse */
> > > +               if (!g12a_hw_onecell_data.hws[i])
> > > +                       continue;
> > > +
> > > +               ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
> > > +               if (ret) {
> > > +                       dev_err(dev, "Clock registration failed\n");
> > > +                       return ret;
> > > +               }
> > > +       }
> > > +
> > > +       return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> > > +                                          &g12a_hw_onecell_data);
> > > +}
> > > +
> > > +static struct platform_driver g12a_driver = {
> > > +       .probe          = g12a_clkc_probe,
> > > +       .driver         = {
> > > +               .name   = "g12a-clkc",
> > > +               .of_match_table = clkc_match_table,
> > > +       },
> > > +};
> > > +
> > > +builtin_platform_driver(g12a_driver);
> > > diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
> > > new file mode 100644
> > > index 0000000..98cb93c
> > > --- /dev/null
> > > +++ b/drivers/clk/meson/g12a.h
> > > @@ -0,0 +1,123 @@
> > > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> > > +/*
> > > + * Copyright (c) 2016 AmLogic, Inc.
> > > + * Author: Michael Turquette <mturquette at baylibre.com>
> > > + *
> > > + * Copyright (c) 2018 Amlogic, inc.
> > > + * Author: Jian Hu <jian.hu at amlogic.com>
> > > + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
> > > + *
> > > + */
> > > +#ifndef __G12A_H
> > > +#define __G12A_H
> > > +
> > > +/*
> > > + * Clock controller register offsets
> > > + *
> > > + * Register offsets from the data sheet must be multiplied by 4 before
> > > + * adding them to the base address to get the right value.
> > > + */
> > > +#define HHI_MIPI_CNTL0                 0x000
> > > +#define HHI_MIPI_CNTL1                 0x004
> > > +#define HHI_MIPI_CNTL2                 0x008
> > > +#define HHI_MIPI_STS                   0x00C
> > > +#define HHI_GP0_PLL_CNTL0              0x040
> > > +#define HHI_GP0_PLL_CNTL1              0x044
> > > +#define HHI_GP0_PLL_CNTL2              0x048
> > > +#define HHI_GP0_PLL_CNTL3              0x04C
> > > +#define HHI_GP0_PLL_CNTL4              0x050
> > > +#define HHI_GP0_PLL_CNTL5              0x054
> > > +#define HHI_GP0_PLL_CNTL6              0x058
> > > +#define HHI_GP0_PLL_STS                        0x05C
> > > +#define HHI_PCIE_PLL_CNTL0             0x098
> > > +#define HHI_PCIE_PLL_CNTL1             0x09C
> > > +#define HHI_PCIE_PLL_CNTL2             0x0A0
> > > +#define HHI_PCIE_PLL_CNTL3             0x0A4
> > > +#define HHI_PCIE_PLL_CNTL4             0x0A8
> > > +#define HHI_PCIE_PLL_CNTL5             0x0AC
> > > +#define HHI_PCIE_PLL_STS               0x0B8
> > > +#define HHI_HIFI_PLL_CNTL0             0x0D8
> > > +#define HHI_HIFI_PLL_CNTL1             0x0DC
> > > +#define HHI_HIFI_PLL_CNTL2             0x0E0
> > > +#define HHI_HIFI_PLL_CNTL3             0x0E4
> > > +#define HHI_HIFI_PLL_CNTL4             0x0E8
> > > +#define HHI_HIFI_PLL_CNTL5             0x0EC
> > > +#define HHI_HIFI_PLL_CNTL6             0x0F0
> > > +#define HHI_GCLK_MPEG0                 0x140
> > > +#define HHI_GCLK_MPEG1                 0x144
> > > +#define HHI_GCLK_MPEG2                 0x148
> > > +#define HHI_GCLK_OTHER                 0x150
> > > +#define HHI_MPEG_CLK_CNTL              0x174
> > > +#define HHI_AUD_CLK_CNTL               0x178
> > > +#define HHI_VID_CLK_CNTL               0x17c
> > > +#define HHI_TS_CLK_CNTL                        0x190
> > > +#define HHI_VID_CLK_CNTL2              0x194
> > > +#define HHI_SYS_CPU_CLK_CNTL0  0x19c
> > > +#define HHI_MALI_CLK_CNTL              0x1b0
> > > +#define HHI_VPU_CLKC_CNTL              0x1b4
> > > +#define HHI_VPU_CLK_CNTL               0x1bC
> > > +#define HHI_HDMI_CLK_CNTL              0x1CC
> > > +#define HHI_VDEC_CLK_CNTL              0x1E0
> > > +#define HHI_VDEC2_CLK_CNTL             0x1E4
> > > +#define HHI_VDEC3_CLK_CNTL             0x1E8
> > > +#define HHI_VDEC4_CLK_CNTL             0x1EC
> > > +#define HHI_HDCP22_CLK_CNTL            0x1F0
> > > +#define HHI_VAPBCLK_CNTL               0x1F4
> > > +#define HHI_VPU_CLKB_CNTL              0x20C
> > > +#define HHI_GEN_CLK_CNTL               0x228
> > > +#define HHI_VDIN_MEAS_CLK_CNTL 0x250
> > > +#define HHI_MIPIDSI_PHY_CLK_CNTL       0x254
> > > +#define HHI_NAND_CLK_CNTL              0x25C
> > > +#define HHI_SD_EMMC_CLK_CNTL   0x264
> > > +#define HHI_MPLL_CNTL0                 0x278
> > > +#define HHI_MPLL_CNTL1                 0x27C
> > > +#define HHI_MPLL_CNTL2                 0x280
> > > +#define HHI_MPLL_CNTL3                 0x284
> > > +#define HHI_MPLL_CNTL4                 0x288
> > > +#define HHI_MPLL_CNTL5                 0x28c
> > > +#define HHI_MPLL_CNTL6                 0x290
> > > +#define HHI_MPLL_CNTL7                 0x294
> > > +#define HHI_MPLL_CNTL8                 0x298
> > > +#define HHI_FIX_PLL_CNTL0              0x2A0
> > > +#define HHI_FIX_PLL_CNTL1              0x2A4
> > > +#define HHI_SYS_PLL_CNTL0              0x2f4
> > > +#define HHI_SYS_PLL_CNTL1              0x2f8
> > > +#define HHI_SYS_PLL_CNTL2              0x2fc
> > > +#define HHI_SYS_PLL_CNTL3              0x300
> > > +#define HHI_SYS_PLL_CNTL4              0x304
> > > +#define HHI_SYS_PLL_CNTL5              0x308
> > > +#define HHI_SYS_PLL_CNTL6              0x30c
> > > +#define HHI_SPICC_CLK_CNTL             0x3dc
> > > +
> > > +/*
> > > + * CLKID index values
> > > + *
> > > + * These indices are entirely contrived and do not map onto the hardware.
> > > + * It has now been decided to expose everything by default in the DT header:
> > > + * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
> > > + * to expose, such as the internal muxes and dividers of composite clocks,
> > > + * will remain defined here.
> > > + */
> > > +#define CLKID_MPEG_SEL                         8
> > > +#define CLKID_MPEG_DIV                         9
> > > +#define CLKID_SD_EMMC_B_CLK0_SEL       62
> > > +#define CLKID_SD_EMMC_B_CLK0_DIV       63
> > > +#define CLKID_SD_EMMC_C_CLK0_SEL       64
> > > +#define CLKID_SD_EMMC_C_CLK0_DIV       65
> > > +#define CLKID_MPLL0_DIV                                66
> > > +#define CLKID_MPLL1_DIV                                67
> > > +#define CLKID_MPLL2_DIV                                68
> > > +#define CLKID_MPLL3_DIV                                69
> > > +#define CLKID_MPLL_PREDIV                      70
> > > +#define CLKID_FCLK_DIV2_DIV                    72
> > > +#define CLKID_FCLK_DIV3_DIV                    73
> > > +#define CLKID_FCLK_DIV4_DIV                    74
> > > +#define CLKID_FCLK_DIV5_DIV                    75
> > > +#define CLKID_FCLK_DIV7_DIV                    76

Please fix the alignement

> > > +
> > > +#define NR_CLKS                                                96
> > > +
> > > +/* include the CLKIDs that have been made part of the DT binding */
> > > +#include <dt-bindings/clock/g12a-clkc.h>
> > > +
> > > +#endif /* __G12A_H */
> > > --
> > > 1.9.1
> > > 
> > > 
> > > _______________________________________________
> > > linux-amlogic mailing list
> > > linux-amlogic at lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-amlogic
> > 
> > .
> > 
> 
> 




More information about the linux-amlogic mailing list