[PATCH v2 2/2] clk: meson-axg: add clocks required by pcie driver

Yixun Lan yixun.lan at amlogic.com
Tue Jul 3 03:17:00 PDT 2018


Hi Jerome:


On 07/03/18 17:24, Jerome Brunet wrote:
> On Mon, 2018-07-02 at 21:31 +0000, Yixun Lan wrote:
>> Adding clocks for the pcie driver. Due to the ASIC design,
>> the pcie controller re-use part of the mipi clock logic,
>> so the mipi clock is also added.
>>
>> Tested-by: Jianxin Qin <jianxin.qin at amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
>> ---
>>  drivers/clk/meson/axg.c | 148 ++++++++++++++++++++++++++++++++++++++++
>>  drivers/clk/meson/axg.h |   6 +-
>>  2 files changed, 153 insertions(+), 1 deletion(-)
>>
>>
> 
> [...]
> 
>> +
>> +/* skip the partent 0, it's for debug only */
>> +static u32 mux_table_pcie_ref[]	= { 1 };
>> +static const char * const pcie_ref_parent_names[] = { "pcie_mux" };
> 
> Dropped these symbols.
> 
>> +
>> +static struct clk_regmap axg_pcie_ref = {
>> +	.data = &(struct clk_regmap_mux_data){
>> +		.offset = HHI_PCIE_PLL_CNTL6,
>> +		.mask = 0x1,
>> +		.shift = 1,
>> +		.table = mux_table_pcie_ref,
> 
> Replaced with the table itself
> 
>> +	},
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "pcie_ref",
>> +		.ops = &clk_regmap_mux_ops,
>> +		.parent_names = pcie_ref_parent_names,
>> +		.num_parents = ARRAY_SIZE(pcie_ref_parent_names),
> 
> Replaced with the table itself and applied. Thx
> 
>> +		.flags = CLK_SET_RATE_PARENT,
>> +	},
>> +};
>> +

I'm seeing you already applied this patch, so would you like to
fix/amend the patch for me, or want me send another patch version?

thanks



More information about the linux-amlogic mailing list