[PATCH 0/3] clk: meson: add a sub EMMC clock controller support

Yixun Lan yixun.lan at amlogic.com
Tue Jul 3 07:57:13 PDT 2018


This driver will add a EMMC clock controller driver support.
The original idea about adding a clock controller is during the
discussion in the NAND driver mainline effort[1].

I've tested this in the S400 board (AXG platform) by using NAND driver.

[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13

Yixun Lan (3):
  clk: meson: add DT documentation for emmc clock controller
  clk: meson: add sub EMMC clock dt-bindings IDs
  clk: meson: add sub EMMC clock controller driver

 .../bindings/clock/amlogic,emmc-clkc.txt      |  45 ++++++
 drivers/clk/meson/Kconfig                     |   9 ++
 drivers/clk/meson/Makefile                    |   1 +
 drivers/clk/meson/emmc-clkc.c                 | 136 ++++++++++++++++++
 include/dt-bindings/clock/emmc-clkc.h         |  14 ++
 5 files changed, 205 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
 create mode 100644 drivers/clk/meson/emmc-clkc.c
 create mode 100644 include/dt-bindings/clock/emmc-clkc.h

-- 
2.18.0




More information about the linux-amlogic mailing list