[v3, 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree
Guenter Roeck
linux at roeck-us.net
Sun Feb 11 17:11:58 PST 2018
On Sun, Feb 11, 2018 at 09:08:47PM +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> Following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt to make use of
> the parameter logic.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
Reviewed-by: Guenter Roeck <linux at roeck-us.net>
> ---
>
> Notes:
> v3:
> - Reformat and use coh901327_wdt.timeout instead of margin when print out
> timout in probe function.
>
> v2:
> - Set .timeout in coh901327_wdt structure declaration.
> - Set .min_timeout to 1 instead of 0. I could not find a datasheet
> for coh901327, so I'm not sure if 0 is valid. However, 0 seems
> wrong to me and most driver has 1 as min value. If it should
> be 0, please let me know and I have to set another initial
> value for margin.
>
> drivers/watchdog/coh901327_wdt.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
> index 4410337f4f7f..500af8a7ec5a 100644
> --- a/drivers/watchdog/coh901327_wdt.c
> +++ b/drivers/watchdog/coh901327_wdt.c
> @@ -67,7 +67,9 @@
> #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
>
> /* Default timeout in seconds = 1 minute */
> -static unsigned int margin = 60;
> +#define U300_WDOG_DEFAULT_TIMEOUT 60
> +
> +static unsigned int margin;
> static int irq;
> static void __iomem *virtbase;
> static struct device *parent;
> @@ -235,8 +237,9 @@ static struct watchdog_device coh901327_wdt = {
> * timeout register is max
> * 0x7FFF = 327670ms ~= 327s.
> */
> - .min_timeout = 0,
> + .min_timeout = 1,
> .max_timeout = 327,
> + .timeout = U300_WDOG_DEFAULT_TIMEOUT,
> };
>
> static int __exit coh901327_remove(struct platform_device *pdev)
> @@ -315,16 +318,15 @@ static int __init coh901327_probe(struct platform_device *pdev)
> goto out_no_irq;
> }
>
> - ret = watchdog_init_timeout(&coh901327_wdt, margin, dev);
> - if (ret < 0)
> - coh901327_wdt.timeout = 60;
> + watchdog_init_timeout(&coh901327_wdt, margin, dev);
>
> coh901327_wdt.parent = dev;
> ret = watchdog_register_device(&coh901327_wdt);
> if (ret)
> goto out_no_wdog;
>
> - dev_info(dev, "initialized. timer margin=%d sec\n", margin);
> + dev_info(dev, "initialized. (timeout=%d sec)\n",
> + coh901327_wdt.timeout);
> return 0;
>
> out_no_wdog:
More information about the linux-amlogic
mailing list