[PATCH 6/7] watchdog: meson: allow setting timeout in devicetree

Alexandre Belloni alexandre.belloni at free-electrons.com
Fri Feb 9 15:19:10 PST 2018


Hi Guenter,

On 09/02/2018 at 14:48:49 -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > By following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt, it also
> > let us to set timout-sec property in devicetree.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson at gmail.com>
> 
> Reviewed-by: Guenetr Roeck <linux at roeck-us.net>
                  ^
A small typo in your name


> > ---
> >  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> >  drivers/watchdog/meson_wdt.c                             | 2 +-
> >  2 files changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > index 8a6d84cb36c9..7588cc3971bf 100644
> > --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > @@ -9,9 +9,13 @@ Required properties:
> >  	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> >  - reg : Specifies base physical address and size of the registers.
> >  
> > +Optional properties:
> > +- timeout-sec: contains the watchdog timeout in seconds.
> > +
> >  Example:
> >  
> >  wdt: watchdog at c1109900 {
> >  	compatible = "amlogic,meson6-wdt";
> >  	reg = <0xc1109900 0x8>;
> > +	timeout-sec = <10>;
> >  };
> > diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> > index 304274c67735..cd0275a6cdac 100644
> > --- a/drivers/watchdog/meson_wdt.c
> > +++ b/drivers/watchdog/meson_wdt.c
> > @@ -36,7 +36,7 @@
> >  #define MESON_SEC_TO_TC(s, c)	((s) * (c))
> >  
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> > -static unsigned int timeout = MESON_WDT_TIMEOUT;
> > +static unsigned int timeout;
> >  
> >  struct meson_wdt_data {
> >  	unsigned int enable;
> > -- 
> > 2.15.1
> > 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com



More information about the linux-amlogic mailing list