[PATCH v5 2/7] clk: meson: aoclk: refactor common code into dedicated file
Jerome Brunet
jbrunet at baylibre.com
Mon Apr 16 04:34:50 PDT 2018
On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote:
> We try to refactor the common code into one dedicated file,
> while preparing to add new Meson-AXG aoclk driver, this would
> help us to better share the code by all aoclk drivers.
>
> Suggested-by: Jerome Brunet <jbrunet at baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
> ---
> drivers/clk/meson/Kconfig | 7 ++++
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++---------------------------
> drivers/clk/meson/gxbb-aoclk.h | 7 ++++
> drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++
> 6 files changed, 163 insertions(+), 60 deletions(-)
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index d5cbec522aec..fddc7ec7b820 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
> depends on OF
> depends on ARCH_MESON || COMPILE_TEST
>
> +config COMMON_CLK_MESON_AO
> + bool
> + depends on OF
> + depends on ARCH_MESON || COMPILE_TEST
> + select COMMON_CLK_REGMAP_MESON
> +
> config COMMON_CLK_REGMAP_MESON
> bool
> select REGMAP
> @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
> bool
> depends on COMMON_CLK_AMLOGIC
> select RESET_CONTROLLER
> + select COMMON_CLK_MESON_AO
> select COMMON_CLK_REGMAP_MESON
> select MFD_SYSCON
> help
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index ffee82e60b7a..0a8df284f4e7 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -3,6 +3,7 @@
> #
>
> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
> +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
> obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index eebb580b9e0f..f2e0640a7f74 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -52,39 +52,13 @@
> * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> */
> -#include <linux/clk-provider.h>
> -#include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/reset-controller.h>
Not required anymore
> #include <linux/mfd/syscon.h>
> -#include <linux/regmap.h>
> #include <linux/init.h>
Not required
> -#include <linux/delay.h>
> -#include <dt-bindings/clock/gxbb-aoclkc.h>
> -#include <dt-bindings/reset/gxbb-aoclkc.h>
Please keep these 2 here
> #include "clk-regmap.h"
> #include "gxbb-aoclk.h"
>
> -struct gxbb_aoclk_reset_controller {
> - struct reset_controller_dev reset;
> - unsigned int *data;
> - struct regmap *regmap;
> -};
> -
> -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
> - unsigned long id)
> -{
> - struct gxbb_aoclk_reset_controller *reset =
> - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
> -
> - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
> - BIT(reset->data[id]));
> -}
> -
> -static const struct reset_control_ops gxbb_aoclk_reset_ops = {
> - .reset = gxbb_aoclk_do_reset,
> -};
> -
> #define GXBB_AO_GATE(_name, _bit) \
> static struct clk_regmap _name##_ao = { \
> .data = &(struct clk_regmap_gate_data) { \
> @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
> },
> };
>
> -static unsigned int gxbb_aoclk_reset[] = {
> +static const unsigned int gxbb_aoclk_reset[] = {
> [RESET_AO_REMOTE] = 16,
> [RESET_AO_I2C_MASTER] = 18,
> [RESET_AO_I2C_SLAVE] = 19,
> @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
> };
>
> -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
> +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
> .hws = {
> [CLKID_AO_REMOTE] = &remote_ao.hw,
> [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
> @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
> [CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
> },
> - .num = 7,
> + .num = NR_CLKS,
> };
>
> -static int gxbb_aoclkc_probe(struct platform_device *pdev)
> +static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
> {
> - struct gxbb_aoclk_reset_controller *rstc;
> struct device *dev = &pdev->dev;
> struct regmap *regmap;
> - int ret, clkid;
> -
> - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
> - if (!rstc)
> - return -ENOMEM;
> + int ret;
>
> regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
> if (IS_ERR(regmap)) {
> dev_err(dev, "failed to get regmap\n");
> - return -ENODEV;
> - }
> -
> - /* Reset Controller */
> - rstc->regmap = regmap;
> - rstc->data = gxbb_aoclk_reset;
> - rstc->reset.ops = &gxbb_aoclk_reset_ops;
> - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
> - rstc->reset.of_node = dev->of_node;
> - ret = devm_reset_controller_register(dev, &rstc->reset);
> -
> - /*
> - * Populate regmap and register all clks
> - */
> - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
> - gxbb_aoclk_gate[clkid]->map = regmap;
> -
> - ret = devm_clk_hw_register(dev,
> - gxbb_aoclk_onecell_data.hws[clkid]);
> - if (ret)
> - return ret;
> + return PTR_ERR(regmap);
> }
>
> /* Specific clocks */
> cec_32k_ao.regmap = regmap;
> ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
> + if (ret) {
> + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct meson_aoclk_data gxbb_aoclkc_data = {
> + .reset_reg = AO_RTI_GEN_CNTL_REG0,
> + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
> + .reset = gxbb_aoclk_reset,
> + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate),
> + .clks = gxbb_aoclk_gate,
> + .hw_data = &gxbb_aoclk_onecell_data,
> +};
> +
> +static int gxbb_aoclkc_probe(struct platform_device *pdev)
> +{
> + int ret = gxbb_register_cec_ao_32k(pdev);
> if (ret)
> return ret;
>
> - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> - &gxbb_aoclk_onecell_data);
> + return meson_aoclkc_probe(pdev);
> }
>
> static const struct of_device_id gxbb_aoclkc_match_table[] = {
> - { .compatible = "amlogic,meson-gx-aoclkc" },
> + {
> + .compatible = "amlogic,meson-gx-aoclkc",
> + .data = &gxbb_aoclkc_data,
> + },
> { }
> };
>
> diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
> index badc4c22b4ee..b031f1a0213e 100644
> --- a/drivers/clk/meson/gxbb-aoclk.h
> +++ b/drivers/clk/meson/gxbb-aoclk.h
> @@ -8,6 +8,10 @@
> #ifndef __GXBB_AOCLKC_H
> #define __GXBB_AOCLKC_H
>
> +#include "meson-aoclk.h"
You are not using any of the structure defined in meson-aoclk.h in here.
Why do you include this here ?
> +
> +#define NR_CLKS 7
> +
> /* AO Configuration Clock registers offsets */
> #define AO_RTI_PWR_CNTL_REG1 0x0c
> #define AO_RTI_PWR_CNTL_REG0 0x10
> @@ -26,4 +30,7 @@ struct aoclk_cec_32k {
>
> extern const struct clk_ops meson_aoclk_cec_32k_ops;
>
> +#include <dt-bindings/clock/gxbb-aoclkc.h>
> +#include <dt-bindings/reset/gxbb-aoclkc.h>
Please drop this.
> +
> #endif /* __GXBB_AOCLKC_H */
> diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
> new file mode 100644
> index 000000000000..74338ef0a62b
> --- /dev/null
> +++ b/drivers/clk/meson/meson-aoclk.c
> @@ -0,0 +1,82 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Amlogic Meson-AXG Clock Controller Driver
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
> + * Author: Yixun Lan <yixun.lan at amlogic.com>
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/init.h>
Not required
> +#include <linux/of_device.h>
> +#include "clk-regmap.h"
> +#include "meson-aoclk.h"
> +
> +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct meson_aoclk_reset_controller *rstc =
> + container_of(rcdev, struct meson_aoclk_reset_controller, reset);
> +
> + return regmap_write(rstc->regmap, rstc->data->reset_reg,
> + BIT(rstc->data->reset[id]));
> +}
> +
> +static const struct reset_control_ops meson_aoclk_reset_ops = {
> + .reset = meson_aoclk_do_reset,
> +};
> +
> +int meson_aoclkc_probe(struct platform_device *pdev)
> +{
> + struct meson_aoclk_reset_controller *rstc;
> + struct meson_aoclk_data *data;
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + int ret, clkid;
> +
> + data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
> + if (!data)
> + return -ENODEV;
> +
> + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
> + if (!rstc)
> + return -ENOMEM;
> +
> + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
> + if (IS_ERR(regmap)) {
> + dev_err(dev, "failed to get regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> + /* Reset Controller */
> + rstc->data = data;
> + rstc->regmap = regmap;
> + rstc->reset.ops = &meson_aoclk_reset_ops;
> + rstc->reset.nr_resets = data->num_reset,
> + rstc->reset.of_node = dev->of_node;
> + ret = devm_reset_controller_register(dev, &rstc->reset);
> + if (ret) {
> + dev_err(dev, "failed to register reset controller\n");
> + return ret;
> + }
> +
> + /*
> + * Populate regmap and register all clks
> + */
> + for (clkid = 0; clkid < data->num_clks; clkid++) {
> + data->clks[clkid]->map = regmap;
> +
> + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
> + if (ret)
> + return ret;
> + }
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + (void *) data->hw_data);
> +}
> diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h
> new file mode 100644
> index 000000000000..ec59e027dd37
> --- /dev/null
> +++ b/drivers/clk/meson/meson-aoclk.h
> @@ -0,0 +1,35 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2017 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
> + * Author: Yixun Lan <yixun.lan at amlogic.com>
> + */
> +
> +#ifndef __MESON_AOCLK_H__
> +#define __MESON_AOCLK_H__
> +
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include "clk-regmap.h"
> +
> +struct meson_aoclk_data {
> + const unsigned int reset_reg;
> + const int num_reset;
> + const unsigned int *reset;
> + int num_clks;
> + struct clk_regmap **clks;
> + const struct clk_hw_onecell_data *hw_data;
> +};
> +
> +struct meson_aoclk_reset_controller {
> + struct reset_controller_dev reset;
> + const struct meson_aoclk_data *data;
> + struct regmap *regmap;
> +};
> +
> +int meson_aoclkc_probe(struct platform_device *pdev);
> +#endif
> +
More information about the linux-amlogic
mailing list