[PATCH usb-next v6 3/3] usb: core: hcd: integrate the PHY roothub wrapper

[Alan Stern]

On Tue, 17 Oct 2017, Martin Blumenstingl wrote:

> This integrates the PHY roothub wrapper into the core hcd
> infrastructure. Multiple PHYs which are part of the roothub devicetree
> node (which is a sub-node of the sysdev's node) are now managed
> (= powered on/off when needed), by the new usb_phy_roothub code.
> 
> One example where this is required is the Amlogic GXL and GXM SoCs:
> They are using a dwc3 USB controller with up to three ports enabled on
> the internal roothub. Using only the top-level "phy" properties does not
> work here since one can only specify one "usb2-phy" and one "usb3-phy",
> while actually at least two "usb2-phy" have to be specified.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  drivers/usb/core/hcd.c  | 27 +++++++++++++++++++++++++++
>  include/linux/usb/hcd.h |  1 +
>  2 files changed, 28 insertions(+)
> 
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 67aa3d039b9b..59bb8dac5264 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -50,6 +50,7 @@
>  #include <linux/usb/otg.h>
>  
>  #include "usb.h"
> +#include "phy.h"
>  
>  
>  /*-------------------------------------------------------------------------*/
> @@ -2271,6 +2272,8 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
>  		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
>  		hcd->state = HC_STATE_SUSPENDED;
>  
> +		usb_phy_roothub_power_off(hcd->phy_roothub);
> +
>  		/* Did we race with a root-hub wakeup event? */
>  		if (rhdev->do_remote_wakeup) {
>  			char	buffer[6];
> @@ -2292,6 +2295,7 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
>  		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
>  				"suspend", status);
>  	}
> +
>  	return status;
>  }

Unnecessary whitespace change.  Otherwise this is okay.

Acked-by: Alan Stern <stern at rowland.harvard.edu>

Alan Stern