[PATCH v2 0/2] pinctrl: meson: prepare for new SoC

[Jerome Brunet]

The goal of this patchset is to prepare meson pinctrl driver to
add a new meson SoC support. This new SoC will share the same pinconf/gpio
registers but the pinmux part will be slightly different.

First patch allows to compile and ship only the necessary pinctrl drivers,
depending on the architecture and configuration needs. This should save
a bit of memory.

Second patch provide a way to deal with a different pinmux scheme, while
reusing most of the meson pinctrl driver.

Linus, FYI, this series depends on the meson changes you have already
merged in this cycle.

Change since v1: [0]
* Use of_device_get_match_data() in patch
* Change pmx naming scheme for the SoC parts

[0]: https://lkml.kernel.org/r/20171009101747.16940-1-jbrunet@baylibre.com

Jerome Brunet (2):
  pinctrl: meson: separate soc drivers
  pinctrl: meson: rework pinmux ops

 drivers/pinctrl/Kconfig                    |  11 +--
 drivers/pinctrl/meson/Kconfig              |  43 +++++++++
 drivers/pinctrl/meson/Makefile             |   9 +-
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c |  28 +++++-
 drivers/pinctrl/meson/pinctrl-meson-gxl.c  |  28 +++++-
 drivers/pinctrl/meson/pinctrl-meson.c      | 150 +++--------------------------
 drivers/pinctrl/meson/pinctrl-meson.h      |  42 +++-----
 drivers/pinctrl/meson/pinctrl-meson8-pmx.c | 108 +++++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson8-pmx.h |  48 +++++++++
 drivers/pinctrl/meson/pinctrl-meson8.c     |  28 +++++-
 drivers/pinctrl/meson/pinctrl-meson8b.c    |  28 +++++-
 11 files changed, 335 insertions(+), 188 deletions(-)
 create mode 100644 drivers/pinctrl/meson/Kconfig
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson8-pmx.c
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson8-pmx.h

-- 
2.13.6