[PATCH u-boot v3 1/5] ARM: arch-meson: add ethernet common init function
Neil Armstrong
narmstrong at baylibre.com
Mon Nov 27 01:16:16 PST 2017
Introduce a generic common Ethernet Hardware init function
common to all Amlogic GX SoCs with support for the
Internal PHY enable for GXL SoCs.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
arch/arm/include/asm/arch-meson/eth.h | 23 +++++++++++++++
arch/arm/mach-meson/Makefile | 2 +-
arch/arm/mach-meson/eth.c | 55 +++++++++++++++++++++++++++++++++++
3 files changed, 79 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/include/asm/arch-meson/eth.h
create mode 100644 arch/arm/mach-meson/eth.c
diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h
new file mode 100644
index 0000000..3089f13
--- /dev/null
+++ b/arch/arm/include/asm/arch-meson/eth.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MESON_ETH_H__
+#define __MESON_ETH_H__
+
+#include <phy.h>
+
+enum {
+ /* Use GXL Internal RMII PHY */
+ MESON_GXL_USE_INTERNAL_RMII_PHY = 1,
+};
+
+/* Configure the Ethernet MAC with the requested interface mode
+ * with some optional flags.
+ */
+void meson_gx_eth_init(phy_interface_t mode, unsigned int flags);
+
+#endif /* __MESON_ETH_H__ */
diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile
index bf49b8b..b4e8dde 100644
--- a/arch/arm/mach-meson/Makefile
+++ b/arch/arm/mach-meson/Makefile
@@ -4,4 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += board.o sm.o
+obj-y += board.o sm.o eth.o
diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c
new file mode 100644
index 0000000..2debe93
--- /dev/null
+++ b/arch/arm/mach-meson/eth.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/eth.h>
+#include <phy.h>
+
+/* Configure the Ethernet MAC with the requested interface mode
+ * with some optional flags.
+ */
+void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
+{
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ /* Set RGMII mode */
+ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+ GXBB_ETH_REG_0_TX_PHASE(1) |
+ GXBB_ETH_REG_0_TX_RATIO(4) |
+ GXBB_ETH_REG_0_PHY_CLK_EN |
+ GXBB_ETH_REG_0_CLK_EN);
+ break;
+
+ case PHY_INTERFACE_MODE_RMII:
+ /* Set RMII mode */
+ out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Use GXL RMII Internal PHY */
+ if (IS_ENABLED(CONFIG_MESON_GXL) &&
+ (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
+ writel(GXBB_ETH_REG_2, 0x10110181);
+ writel(GXBB_ETH_REG_3, 0xe40908ff);
+ }
+
+ break;
+
+ default:
+ printf("Invalid Ethernet interface mode\n");
+ return;
+ }
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+}
--
2.7.4
More information about the linux-amlogic
mailing list