[PATCH v2 0/5] Add support for Amlogic GXL Based SBCs

[Neil Armstrong]

Hi Tom, Simon,

Le 22/11/2017 14:25, Neil Armstrong a écrit :
> This patchset aimed to add minimal support for the following Amlogic GXL SoC
> based board:
> - LibreTech-CC
> - Khadas VIM
> 
> The initial support is composed of :
> - Minimal boot support with serial, MMC, Ethernet and SDCard
> - Updated DTS from Linux 4.13.8
> 
> Commands to generate a valid binary are provided in the board README.
> 
> A common Ethernet init function is introduced to avoid duplicating
> the same hardware init code.
> 
> The P212 and Odroid-C2 board are also converted to this common function
> by this patchset.
> 
> The following work will be pushed later on :
> - Support for dynamic reading of DDR memory size from registers
> - USB DWC3 Host Support with PHY support


I'll try to address Simon's comments, but is it still possible
to have this merged for v2018.01 ?

For the next release cycle, I'll try to add a proper clock driver
and have a look to binman for sure.

Neil

> 
> Changes since v1:
> - Add common ethernet init function
> - Switch P212 and Odroid-C2 to use this ethernet init function
> - Fix typos in READMEs
> - Drop #define CONFIG_CONS_INDEX
> 
> Neil Armstrong (5):
>   ARM: arch-meson: add ethernet common init function
>   board: odroid-c2: use common ethernet init function
>   board: p212: use common ethernet init function
>   arm: Add LibreTech CC support based on Meson GXL family
>   arm: Add Khadas VIM support based on Meson GXL family
> 
>  arch/arm/dts/Makefile                         |   4 +-
>  arch/arm/dts/meson-gxl-s905x-khadas-vim.dts   | 137 +++++++++++++++++++++
>  arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 ++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-meson/eth.h         |  15 +++
>  arch/arm/mach-meson/Kconfig                   |  18 +++
>  arch/arm/mach-meson/Makefile                  |   2 +-
>  arch/arm/mach-meson/eth.c                     |  53 ++++++++
>  board/amlogic/khadas-vim/Kconfig              |  12 ++
>  board/amlogic/khadas-vim/MAINTAINERS          |   6 +
>  board/amlogic/khadas-vim/Makefile             |   8 ++
>  board/amlogic/khadas-vim/README               |  96 +++++++++++++++
>  board/amlogic/khadas-vim/khadas-vim.c         |  48 ++++++++
>  board/amlogic/libretech-cc/Kconfig            |  12 ++
>  board/amlogic/libretech-cc/MAINTAINERS        |   6 +
>  board/amlogic/libretech-cc/Makefile           |   8 ++
>  board/amlogic/libretech-cc/README             |  96 +++++++++++++++
>  board/amlogic/libretech-cc/libretech-cc.c     |  52 ++++++++
>  board/amlogic/odroid-c2/odroid-c2.c           |  11 +-
>  board/amlogic/p212/p212.c                     |  14 +--
>  configs/khadas-vim_defconfig                  |  35 ++++++
>  configs/libretech-cc_defconfig                |  35 ++++++
>  include/configs/khadas-vim.h                  |  21 ++++
>  include/configs/libretech-cc.h                |  21 ++++
>  23 files changed, 858 insertions(+), 23 deletions(-)
>  create mode 100644 arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
>  create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
>  create mode 100644 arch/arm/include/asm/arch-meson/eth.h
>  create mode 100644 arch/arm/mach-meson/eth.c
>  create mode 100644 board/amlogic/khadas-vim/Kconfig
>  create mode 100644 board/amlogic/khadas-vim/MAINTAINERS
>  create mode 100644 board/amlogic/khadas-vim/Makefile
>  create mode 100644 board/amlogic/khadas-vim/README
>  create mode 100644 board/amlogic/khadas-vim/khadas-vim.c
>  create mode 100644 board/amlogic/libretech-cc/Kconfig
>  create mode 100644 board/amlogic/libretech-cc/MAINTAINERS
>  create mode 100644 board/amlogic/libretech-cc/Makefile
>  create mode 100644 board/amlogic/libretech-cc/README
>  create mode 100644 board/amlogic/libretech-cc/libretech-cc.c
>  create mode 100644 configs/khadas-vim_defconfig
>  create mode 100644 configs/libretech-cc_defconfig
>  create mode 100644 include/configs/khadas-vim.h
>  create mode 100644 include/configs/libretech-cc.h
>