[PATCH v2 1/5] ARM: arch-meson: add ethernet common init function

[Neil Armstrong]

Hi Simon,

Le 24/11/2017 23:35, Simon Glass a écrit :
> Hi Neil,
> 
> On 22 November 2017 at 06:25, Neil Armstrong <narmstrong at baylibre.com> wrote:
>> Introduce a generic common Ethernet Hardware init function
>> common to all Amlogic GX SoCs with support for the
>> Internal PHY enable for GXL SoCs.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>>  arch/arm/include/asm/arch-meson/eth.h | 15 ++++++++++
>>  arch/arm/mach-meson/Makefile          |  2 +-
>>  arch/arm/mach-meson/eth.c             | 53 +++++++++++++++++++++++++++++++++++
>>  3 files changed, 69 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/arm/include/asm/arch-meson/eth.h
>>  create mode 100644 arch/arm/mach-meson/eth.c
>>
>> diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h
>> new file mode 100644
>> index 0000000..8ea8e10
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-meson/eth.h
>> @@ -0,0 +1,15 @@
>> +/*
>> + * Copyright (C) 2016 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#ifndef __MESON_ETH_H__
>> +#define __MESON_ETH_H__
>> +
>> +#include <phy.h>
>> +
>> +void meson_gx_eth_init(phy_interface_t mode, bool use_internal_phy);
>> +
>> +#endif /* __MESON_ETH_H__ */
>> diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile
>> index bf49b8b..b4e8dde 100644
>> --- a/arch/arm/mach-meson/Makefile
>> +++ b/arch/arm/mach-meson/Makefile
>> @@ -4,4 +4,4 @@
>>  # SPDX-License-Identifier:     GPL-2.0+
>>  #
>>
>> -obj-y += board.o sm.o
>> +obj-y += board.o sm.o eth.o
>> diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c
>> new file mode 100644
>> index 0000000..46ecb5e
>> --- /dev/null
>> +++ b/arch/arm/mach-meson/eth.c
>> @@ -0,0 +1,53 @@
>> +/*
>> + * Copyright (C) 2016 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <asm/io.h>
>> +#include <asm/arch/gxbb.h>
>> +#include <asm/arch/eth.h>
>> +#include <phy.h>
>> +
>> +void meson_gx_eth_init(phy_interface_t mode, bool use_internal_phy)
> 
> Can you add a header file addition for this somewhere, with comments?

Do you mean comments in the added arch/arm/include/asm/arch-meson/eth.h in this
same patchset ?

> 
>> +{
>> +       switch (mode) {
>> +       case PHY_INTERFACE_MODE_RGMII:
>> +       case PHY_INTERFACE_MODE_RGMII_ID:
>> +       case PHY_INTERFACE_MODE_RGMII_RXID:
>> +       case PHY_INTERFACE_MODE_RGMII_TXID:
>> +               /* Set RGMII mode */
>> +               setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
>> +                            GXBB_ETH_REG_0_TX_PHASE(1) |
>> +                            GXBB_ETH_REG_0_TX_RATIO(4) |
>> +                            GXBB_ETH_REG_0_PHY_CLK_EN |
>> +                            GXBB_ETH_REG_0_CLK_EN);
>> +               break;
>> +
>> +       case PHY_INTERFACE_MODE_RMII:
>> +               /* Set RMII mode */
>> +               out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
>> +                                        GXBB_ETH_REG_0_CLK_EN);
> 
> How come this is using out_le32() instead of (for example) writel()?

It should be writel(), but since the register size is 32bit, it can be out_le32

> 
>> +
>> +#ifdef CONFIG_MESON_GXL
> 
> This doesn't seem fully generic if it has this #ifdef in it. Can this
> be a parameter? At worst can we use if() instead of #ifdef ?

Yeah, I didn't really figured out how to specify the internal PHY.

GXL and GXM SoCs have an internal PHY, but yeah GXBB does't.
I hesitated to add a different meson_gx_eth_init() signature
for these different SoCs, what do you think about that ?

The new AXG SoC does not have internal PHY, so it will use the same
code as GXBB.

> 
>> +               if (use_internal_phy) {
>> +                       /* Use Internal PHY */
>> +                       out_le32(GXBB_ETH_REG_2, 0x10110181);
>> +                       out_le32(GXBB_ETH_REG_3, 0xe40908ff);
>> +               }
>> +#endif
>> +
>> +               break;
>> +
>> +       default:
>> +               printf("Invalid Ethernet interface mode\n");
>> +               return;
>> +       }
>> +
>> +       /* Enable power and clock gate */
>> +       setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
>> +       clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
> 
> Seems like this should be in a clock driver.

It should, in next release ? Beniamino's I2C driver also used this,
but yes a proper clock driver becomes necessary here.

> 
>> +}
>> --
>> 2.7.4
>>
> 
> Regards,
> Simon
> 

Thanks,
Neil