[PATCH 3/5] iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
Jonathan Cameron
jic23 at kernel.org
Sun Nov 19 07:46:43 PST 2017
On Tue, 31 Oct 2017 21:01:45 +0100
Martin Blumenstingl <martin.blumenstingl at googlemail.com> wrote:
> The Meson GXBB and newer SoCs have a few more registers than the older
> Meson8 and Meson8b SoCs.
> Use a separate regmap config to limit the older SoCs to the DELTA_10
> register.
>
> Fixes: 6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
While this may not have any obvious symptoms, I think it is better to make sure
it is fixed in stable so it doesn't bite us in unexpected ways later.
Applied to the fixes-togreg branch of iio.git and marked for stable.
> ---
> drivers/iio/adc/meson_saradc.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index abe9df879b2a..7dc7d297a0fc 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -224,6 +224,7 @@ struct meson_sar_adc_data {
> u32 bandgap_reg;
> unsigned int resolution;
> const char *name;
> + const struct regmap_config *regmap_config;
> };
>
> struct meson_sar_adc_priv {
> @@ -243,13 +244,20 @@ struct meson_sar_adc_priv {
> int calibscale;
> };
>
> -static const struct regmap_config meson_sar_adc_regmap_config = {
> +static const struct regmap_config meson_sar_adc_regmap_config_gxbb = {
> .reg_bits = 8,
> .val_bits = 32,
> .reg_stride = 4,
> .max_register = MESON_SAR_ADC_REG13,
> };
>
> +static const struct regmap_config meson_sar_adc_regmap_config_meson8 = {
> + .reg_bits = 8,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = MESON_SAR_ADC_DELTA_10,
> +};
> +
> static unsigned int meson_sar_adc_get_fifo_count(struct iio_dev *indio_dev)
> {
> struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> @@ -860,6 +868,7 @@ static const struct iio_info meson_sar_adc_iio_info = {
> static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> .has_bl30_integration = false,
> .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> + .regmap_config = &meson_sar_adc_regmap_config_meson8,
> .resolution = 10,
> .name = "meson-meson8-saradc",
> };
> @@ -867,6 +876,7 @@ static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
> static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> .has_bl30_integration = false,
> .bandgap_reg = MESON_SAR_ADC_DELTA_10,
> + .regmap_config = &meson_sar_adc_regmap_config_meson8,
> .resolution = 10,
> .name = "meson-meson8b-saradc",
> };
> @@ -874,6 +884,7 @@ static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
> static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> .has_bl30_integration = true,
> .bandgap_reg = MESON_SAR_ADC_REG11,
> + .regmap_config = &meson_sar_adc_regmap_config_gxbb,
> .resolution = 10,
> .name = "meson-gxbb-saradc",
> };
> @@ -881,6 +892,7 @@ static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
> static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> .has_bl30_integration = true,
> .bandgap_reg = MESON_SAR_ADC_REG11,
> + .regmap_config = &meson_sar_adc_regmap_config_gxbb,
> .resolution = 12,
> .name = "meson-gxl-saradc",
> };
> @@ -888,6 +900,7 @@ static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
> static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
> .has_bl30_integration = true,
> .bandgap_reg = MESON_SAR_ADC_REG11,
> + .regmap_config = &meson_sar_adc_regmap_config_gxbb,
> .resolution = 12,
> .name = "meson-gxm-saradc",
> };
> @@ -965,7 +978,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
> return ret;
>
> priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> - &meson_sar_adc_regmap_config);
> + priv->data->regmap_config);
> if (IS_ERR(priv->regmap))
> return PTR_ERR(priv->regmap);
>
More information about the linux-amlogic
mailing list