[PATCH 2/5] i2c: meson: add configurable divider factors

[Martin Blumenstingl]

On Fri, Nov 17, 2017 at 9:02 AM, Yixun Lan <yixun.lan at amlogic.com> wrote:
> From: Jian Hu <jian.hu at amlogic.com>
>
> This patch try to add support for I2C controller in Meson-AXG SoC,
> Due to the IP changes between I2C controller, we need to introduce
> a compatible data to make the divider factor configurable.
>
> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
> ---
>  drivers/i2c/busses/i2c-meson.c | 32 ++++++++++++++++++++++++++++----
>  1 file changed, 28 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
> index 88d15b92ec35..517f2cddeff3 100644
> --- a/drivers/i2c/busses/i2c-meson.c
> +++ b/drivers/i2c/busses/i2c-meson.c
> @@ -16,6 +16,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/types.h>
>
> @@ -57,6 +58,10 @@ enum {
>         STATE_WRITE,
>  };
>
> +struct meson_i2c_data {
> +       unsigned char div_factor;
> +};
> +
>  /**
>   * struct meson_i2c - Meson I2C device private data
>   *
> @@ -93,6 +98,8 @@ struct meson_i2c {
>         struct completion       done;
>         u32                     tokens[2];
>         int                     num_tokens;
> +
> +       struct meson_i2c_data *data;
shouldn't this be const (like the definitions below)?

>  };
>
>  static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
> @@ -128,7 +135,7 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
>         unsigned long clk_rate = clk_get_rate(i2c->clk);
>         unsigned int div;
>
> -       div = DIV_ROUND_UP(clk_rate, freq * 4);
> +       div = DIV_ROUND_UP(clk_rate, freq * i2c->data->div_factor);
>
>         /* clock divider has 12 bits */
>         if (div >= (1 << 12)) {
> @@ -376,6 +383,9 @@ static int meson_i2c_probe(struct platform_device *pdev)
>         spin_lock_init(&i2c->lock);
>         init_completion(&i2c->done);
>
> +       i2c->data = (struct meson_i2c_data *)
> +               of_device_get_match_data(&pdev->dev);
> +
>         i2c->clk = devm_clk_get(&pdev->dev, NULL);
>         if (IS_ERR(i2c->clk)) {
>                 dev_err(&pdev->dev, "can't get device clock\n");
> @@ -440,11 +450,25 @@ static int meson_i2c_remove(struct platform_device *pdev)
>         return 0;
>  }
>
> +static const struct meson_i2c_data i2c_meson6_data = {
> +       .div_factor = 4,
> +};
> +
> +static const struct meson_i2c_data i2c_gxbb_data = {
> +       .div_factor = 4,
> +};
> +
> +static const struct meson_i2c_data i2c_axg_data = {
> +       .div_factor = 3,
> +};
> +
>  static const struct of_device_id meson_i2c_match[] = {
> -       { .compatible = "amlogic,meson6-i2c" },
> -       { .compatible = "amlogic,meson-gxbb-i2c" },
> -       { },
> +       { .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data },
> +       { .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data },
> +       { .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data },
> +       {},
>  };
> +
>  MODULE_DEVICE_TABLE(of, meson_i2c_match);
>
>  static struct platform_driver meson_i2c_driver = {
> --
> 2.14.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic