[PATCH v3 2/4] iio: adc: meson-saradc: remove irrelevant clock "sana"
Yixun Lan
yixun.lan at amlogic.com
Mon Nov 6 21:37:16 PST 2017
From: Xingyu Chen <xingyu.chen at amlogic.com>
The "sana" clock is not used at SAR ADC module in Amlogic Meson SoC,
it is irrelevant for the SAR ADC.
Signed-off-by: Xingyu Chen <xingyu.chen at amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
---
drivers/iio/adc/meson_saradc.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2e8dbb89c8c9..f7dcf187fb43 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -231,7 +231,6 @@ struct meson_sar_adc_priv {
const struct meson_sar_adc_data *data;
struct clk *clkin;
struct clk *core_clk;
- struct clk *sana_clk;
struct clk *adc_sel_clk;
struct clk *adc_clk;
struct clk_gate clk_gate;
@@ -708,12 +707,6 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
goto err_core_clk;
}
- ret = clk_prepare_enable(priv->sana_clk);
- if (ret) {
- dev_err(indio_dev->dev.parent, "failed to enable sana clk\n");
- goto err_sana_clk;
- }
-
regval = FIELD_PREP(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, 1);
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
@@ -741,8 +734,6 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
MESON_SAR_ADC_REG3_ADC_EN, 0);
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
- clk_disable_unprepare(priv->sana_clk);
-err_sana_clk:
clk_disable_unprepare(priv->core_clk);
err_core_clk:
regulator_disable(priv->vref);
@@ -768,7 +759,6 @@ static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
MESON_SAR_ADC_REG11_BANDGAP_EN, 0);
- clk_disable_unprepare(priv->sana_clk);
clk_disable_unprepare(priv->core_clk);
regulator_disable(priv->vref);
@@ -962,16 +952,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
return PTR_ERR(priv->core_clk);
}
- priv->sana_clk = devm_clk_get(&pdev->dev, "sana");
- if (IS_ERR(priv->sana_clk)) {
- if (PTR_ERR(priv->sana_clk) == -ENOENT) {
- priv->sana_clk = NULL;
- } else {
- dev_err(&pdev->dev, "failed to get sana clk\n");
- return PTR_ERR(priv->sana_clk);
- }
- }
-
priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
if (IS_ERR(priv->adc_clk)) {
if (PTR_ERR(priv->adc_clk) == -ENOENT) {
--
2.14.1
More information about the linux-amlogic
mailing list