[PATCH RfC v3 6/7] pinctrl: meson: add support for GPIO interrupts
Jerome Brunet
jbrunet at baylibre.com
Tue May 23 02:01:53 PDT 2017
On Wed, 2017-05-17 at 22:17 +0200, Heiner Kallweit wrote:
> Add support for GPIO interrupts on Amlogic Meson SoC's.
>
> There's a limit of 8 parent interupts which can be used in total.
> Note that IRQ_TYPE_EDGE_BOTH interrupts reserve two parent IRQ's,
> one for each edge.
Heiner,
Several people (Neil, Rob and I) have pointed out that device should be an
interrupt controller. Going a bit further, it should be and *independent*
interrupt controller
Meson SoC, like gxbb and gxl, have 2 independent gpio controllers, with there
own register space and which can work on their own.
It is the same for the gpio-irq device, it is an independent device, with its
own register space. It can work even if the gpio device is not driven. The gpio-
irq device should not depend on the gpio controller.
The driver should reflect that, and IMO it should be:
- an independent driver inside driver/irqchip, working even if the gpio device
is not probed
- it should not use gpio stuff (like meson_get_bank). If gpio related
translation should be done to get the irq line number from the gpio number, it
should be done by the gpio driver.
- First, We should be able to request irq directly from this device (eg. through
DT). Then gpio controller could re-export this and make it available (through
gpio_to_irq and DT)
-------------------> IRQ consumer 1
|
------- ------------ | -----------
| GIC | --> | GPIO-IRQ | ----> | AO GPIO | --> IRQ consumer 2
------- ------------ | -----------
|
| -----------
---> | EE GPIO | --> IRQ consumer 3
-----------
Jerome
>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
> v2:
> - make the GPIO IRQ controller a separate driver
> - several smaller improvements
> v3:
> - replace request_irq based parent irq allocation with chained irq
> handling
> - this also fixes a spurious interrupt issue, therefore the related
> workaround code could be removed
> - several smaller improvements
> ---
> drivers/pinctrl/Kconfig | 1 +
> drivers/pinctrl/meson/Makefile | 2 +-
> drivers/pinctrl/meson/pinctrl-meson-irq.c | 320
> ++++++++++++++++++++++++++++++
> drivers/pinctrl/meson/pinctrl-meson.c | 3 +-
> drivers/pinctrl/meson/pinctrl-meson.h | 1 +
> 5 files changed, 325 insertions(+), 2 deletions(-)
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-irq.c
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 37af5e30..f8f401a0 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -153,6 +153,7 @@ config PINCTRL_MESON
> select PINCONF
> select GENERIC_PINCONF
> select GPIOLIB
> + select GPIOLIB_IRQCHIP
> select OF_GPIO
> select REGMAP_MMIO
>
> diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
> index 27c5b512..f711fd0a 100644
> --- a/drivers/pinctrl/meson/Makefile
> +++ b/drivers/pinctrl/meson/Makefile
> @@ -1,3 +1,3 @@
> obj-y += pinctrl-meson8.o pinctrl-meson8b.o
> obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o
> -obj-y += pinctrl-meson.o
> +obj-y += pinctrl-meson-irq.o pinctrl-meson.o
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-irq.c
> b/drivers/pinctrl/meson/pinctrl-meson-irq.c
> new file mode 100644
> index 00000000..f32c26e3
> --- /dev/null
> +++ b/drivers/pinctrl/meson/pinctrl-meson-irq.c
> @@ -0,0 +1,320 @@
> +/*
> + * Amlogic Meson GPIO IRQ driver
> + *
> + * Copyright 2017 Heiner Kallweit <hkallweit1 at gmail.com>
> + * Based on a first version by Jerome Brunet <jbrunet at baylibre.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "pinctrl-meson.h"
> +
> +#define REG_EDGE_POL 0x00
> +#define REG_PIN_03_SEL 0x04
> +#define REG_PIN_47_SEL 0x08
> +#define REG_FILTER_SEL 0x0c
> +
> +#define REG_EDGE_POL_MASK(x) (BIT(x) | BIT(16 + (x)))
> +#define REG_EDGE_POL_EDGE(x) BIT(x)
> +#define REG_EDGE_POL_LOW(x) BIT(16 + (x))
> +
> +#define MESON_GPIO_MAX_PARENT_IRQ_NUM 8
> +
> +struct meson_gpio_irq_slot {
> + int irq;
> + int owner;
> +};
> +
> +static struct regmap *meson_gpio_irq_regmap;
> +static struct meson_gpio_irq_slot
> + meson_gpio_irq_slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> +static int meson_gpio_num_irq_slots;
> +static DEFINE_MUTEX(meson_gpio_irq_slot_mutex);
> +
> +static struct meson_pinctrl *meson_gpio_data_to_pc(struct irq_data *data)
> +{
> + struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +
> + return gpiochip_get_data(chip);
> +}
> +
> +static int meson_gpio_to_hwirq(struct meson_bank *bank, unsigned int offset)
> +{
> + int hwirq;
> +
> + if (bank->irq_first < 0)
> + /* this bank cannot generate irqs */
> + return 0;
> +
> + hwirq = offset - bank->first + bank->irq_first;
> +
> + if (hwirq > bank->irq_last)
> + /* this pin cannot generate irqs */
> + return 0;
> +
> + return hwirq;
> +}
> +
> +static int meson_gpio_to_irq(struct meson_pinctrl *pc, unsigned int offset)
> +{
> + struct meson_bank *bank;
> + int hwirq;
> +
> + offset += pc->data->pin_base;
> +
> + bank = meson_pinctrl_get_bank(pc, offset);
> + if (IS_ERR(bank))
> + return PTR_ERR(bank);
> +
> + hwirq = meson_gpio_to_hwirq(bank, offset);
> + if (!hwirq)
> + dev_dbg(pc->dev, "no interrupt for pin %u\n", offset);
> +
> + return hwirq;
> +}
> +
> +static void meson_gpio_irq_handler(struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct irq_data *gpio_irq_data = irq_desc_get_handler_data(desc);
> +
> + chained_irq_enter(chip, desc);
> +
> + if (gpio_irq_data)
> + generic_handle_irq(gpio_irq_data->irq);
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static int meson_gpio_alloc_irq_slot(struct irq_data *data, int num_slots,
> + int *slots)
> +{
> + int i, cnt = 0;
> +
> + mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> + for (i = 0; i < meson_gpio_num_irq_slots; i++)
> + if (!meson_gpio_irq_slots[i].owner) {
> + meson_gpio_irq_slots[i].owner = data->irq;
> + slots[cnt++] = i;
> + if (cnt == num_slots)
> + break;
> + }
> +
> + if (cnt < num_slots)
> + for (i = 0; i < cnt; i++)
> + meson_gpio_irq_slots[i].owner = 0;
> +
> + mutex_unlock(&meson_gpio_irq_slot_mutex);
> +
> + return cnt == num_slots ? 0 : -ENOSPC;
> +}
> +
> +static void meson_gpio_free_irq_slot(struct irq_data *data)
> +{
> + int i;
> +
> + mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> + for (i = 0; i < meson_gpio_num_irq_slots; i++)
> + if (meson_gpio_irq_slots[i].owner == data->irq) {
> + irq_set_handler_data(meson_gpio_irq_slots[i].irq,
> + NULL);
> + meson_gpio_irq_slots[i].owner = 0;
> + }
> +
> + mutex_unlock(&meson_gpio_irq_slot_mutex);
> +}
> +
> +static int meson_gpio_find_irq_slot(struct irq_data *data, int *slots)
> +{
> + int i, cnt = 0;
> +
> + mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> + for (i = 0; i < meson_gpio_num_irq_slots; i++)
> + if (meson_gpio_irq_slots[i].owner == data->irq)
> + slots[cnt++] = i;
> +
> + mutex_unlock(&meson_gpio_irq_slot_mutex);
> +
> + return cnt ?: -EINVAL;
> +}
> +
> +static void meson_gpio_set_hwirq(int idx, int hwirq)
> +{
> + int reg = idx > 3 ? REG_PIN_47_SEL : REG_PIN_03_SEL;
> + int shift = 8 * (idx % 4);
> +
> + regmap_update_bits(meson_gpio_irq_regmap, reg, 0xff << shift,
> + hwirq << shift);
> +}
> +
> +static void meson_gpio_irq_set_hwirq(struct irq_data *data, int hwirq)
> +{
> + struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> + int i, cnt, slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> +
> + cnt = meson_gpio_find_irq_slot(data, slots);
> + if (cnt < 0) {
> + dev_err(pc->dev, "didn't find gpio irq slot\n");
> + return;
> + }
> +
> + for (i = 0; i < cnt; i++)
> + meson_gpio_set_hwirq(slots[i], hwirq);
> +}
> +
> +static void meson_gpio_irq_unmask(struct irq_data *data)
> +{
> + struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> + unsigned gpio = irqd_to_hwirq(data);
> + int hwirq = meson_gpio_to_irq(pc, gpio);
> +
> + meson_gpio_irq_set_hwirq(data, hwirq);
> +}
> +
> +static void meson_gpio_irq_mask(struct irq_data *data)
> +{
> + meson_gpio_irq_set_hwirq(data, 0xff);
> +}
> +
> +static void meson_gpio_irq_shutdown(struct irq_data *data)
> +{
> + meson_gpio_irq_mask(data);
> + meson_gpio_free_irq_slot(data);
> +}
> +
> +static int meson_gpio_irq_set_type(struct irq_data *data, unsigned int type)
> +{
> + int i, ret, irq, num_slots, slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> + unsigned int val = 0;
> +
> + num_slots = (type == IRQ_TYPE_EDGE_BOTH) ? 2 : 1;
> + ret = meson_gpio_alloc_irq_slot(data, num_slots, slots);
> + if (ret)
> + return ret;
> +
> + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
> + val |= REG_EDGE_POL_EDGE(slots[0]);
> +
> + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
> + val |= REG_EDGE_POL_LOW(slots[0]);
> +
> + regmap_update_bits(meson_gpio_irq_regmap, REG_EDGE_POL,
> + REG_EDGE_POL_MASK(slots[0]), val);
> +
> + /*
> + * The chip can create an interrupt for either rising or falling edge
> + * only. Therefore use two interrupts in case of IRQ_TYPE_EDGE_BOTH,
> + * first for falling edge and second one for rising edge.
> + */
> + if (num_slots > 1) {
> + val = REG_EDGE_POL_EDGE(slots[1]);
> + regmap_update_bits(meson_gpio_irq_regmap, REG_EDGE_POL,
> + REG_EDGE_POL_MASK(slots[1]), val);
> + }
> +
> + if (type & IRQ_TYPE_EDGE_BOTH)
> + val = IRQ_TYPE_EDGE_RISING;
> + else
> + val = IRQ_TYPE_LEVEL_HIGH;
> +
> + for (i = 0; i < num_slots; i++) {
> + irq = meson_gpio_irq_slots[slots[i]].irq;
> + irq_set_irq_type(irq, val);
> + irq_set_handler_data(irq, data);
> + }
> +
> + if (ret)
> + while (--i >= 0)
> + irq_set_handler_data(meson_gpio_irq_slots[slots[i]].i
> rq,
> + NULL);
> + return ret;
> +}
> +
> +struct irq_chip meson_gpio_irq_chip = {
> + .name = "GPIO",
> + .irq_set_type = meson_gpio_irq_set_type,
> + .irq_mask = meson_gpio_irq_mask,
> + .irq_unmask = meson_gpio_irq_unmask,
> + .irq_shutdown = meson_gpio_irq_shutdown,
> +};
> +
> +static int meson_gpio_get_irqs(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + int irq, i;
> +
> + for (i = 0; i < MESON_GPIO_MAX_PARENT_IRQ_NUM; i++) {
> + irq = irq_of_parse_and_map(np, i);
> + if (!irq)
> + break;
> + meson_gpio_irq_slots[i].irq = irq;
> + irq_set_chained_handler_and_data(irq, meson_gpio_irq_handler,
> + NULL);
> + }
> +
> + meson_gpio_num_irq_slots = i;
> +
> + return i ? 0 : -EINVAL;
> +}
> +
> +static const struct regmap_config meson_gpio_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = REG_FILTER_SEL,
> +};
> +
> +static int meson_gpio_irq_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + void __iomem *io_base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + io_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(io_base))
> + return PTR_ERR(io_base);
> +
> + meson_gpio_irq_regmap = devm_regmap_init_mmio(&pdev->dev, io_base,
> + &meson_gpio_regmap_config);
> + if (IS_ERR(meson_gpio_irq_regmap))
> + return PTR_ERR(meson_gpio_irq_regmap);
> +
> + /* initialize to IRQ_TYPE_LEVEL_HIGH */
> + regmap_write(meson_gpio_irq_regmap, REG_EDGE_POL, 0);
> + /* disable all GPIO interrupt sources */
> + regmap_write(meson_gpio_irq_regmap, REG_PIN_03_SEL, 0xffffffff);
> + regmap_write(meson_gpio_irq_regmap, REG_PIN_47_SEL, 0xffffffff);
> + /* disable filtering */
> + regmap_write(meson_gpio_irq_regmap, REG_FILTER_SEL, 0);
> +
> + return meson_gpio_get_irqs(pdev);
> +}
> +
> +static const struct of_device_id meson_gpio_irq_dt_match[] = {
> + { .compatible = "amlogic,meson-gpio-interrupt" },
> + { },
> +};
> +
> +static struct platform_driver meson_gpio_irq_driver = {
> + .probe = meson_gpio_irq_probe,
> + .driver = {
> + .name = "meson-gpio-interrupt",
> + .of_match_table = meson_gpio_irq_dt_match,
> + },
> +};
> +builtin_platform_driver(meson_gpio_irq_driver);
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c
> b/drivers/pinctrl/meson/pinctrl-meson.c
> index 39ad9861..48aa1427 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
> @@ -551,7 +551,8 @@ static int meson_gpiolib_register(struct meson_pinctrl
> *pc)
> return ret;
> }
>
> - return 0;
> + return gpiochip_irqchip_add(&pc->chip, &meson_gpio_irq_chip, 0,
> + handle_simple_irq, IRQ_TYPE_NONE);
> }
>
> static struct regmap_config meson_regmap_config = {
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.h
> b/drivers/pinctrl/meson/pinctrl-meson.h
> index 40b56aff..4aa78f3e 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.h
> +++ b/drivers/pinctrl/meson/pinctrl-meson.h
> @@ -176,6 +176,7 @@ extern struct meson_pinctrl_data
> meson_gxbb_periphs_pinctrl_data;
> extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data;
> extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data;
> extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data;
> +extern struct irq_chip meson_gpio_irq_chip;
>
> struct meson_bank *meson_pinctrl_get_bank(const struct meson_pinctrl *pc,
> unsigned int pin);
More information about the linux-amlogic
mailing list