S805/S812 Device Tree upstreaming (was: Testing.)

[Andreas Färber]

Hi,

Am 08.05.2017 um 11:42 schrieb Oleg:
>> I had a quick look at the .dts files - on my Akaso M8S GPIOZ_1 is not
>> connected anywhere (at least toggling the GPIO doesn't change anything
>> in terms of USB VBUS signal).
>> however, your board has: gpio-vbus-power = "GPIOZ_1";
>> it's very likely that the GL852 hub is powered off by default and is
>> powered on by enabling GPIOZ_1
>> but since my .dts is not enabling GPIOZ_1 the hub stays powered off
>> and USB is not working for you
>> (in other words: this will require additional changes in the .dts to
>> make it work)
> I found dtb to kernel 3.14 the string
> 
> gpio-vbus-power = "GPIOZ_1";
> 
> You can simply copy it to the unit or it needs to change according to
> certain rules ?

You need to read the latest bindings documentation, for example:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)