[PATCH 06/13] ARM: dts: meson8: add the PWM_E and PWM_F pins

[Neil Armstrong]

On 06/11/2017 12:16 PM, Martin Blumenstingl wrote:
> This adds the definition of the PWM_E (CBUS) and PWM_F (AOBUS) to
> meson8.dtsi, allowing devices to use them. PWM_E can be used on some
> devices to generate the 32.768kHz clock for the SDIO wifi module, while
> PWM_F can be used to control the power LED.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  arch/arm/boot/dts/meson8.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index e4f7357b4b31..93e437c91c61 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -123,6 +123,13 @@
>  				function = "remote";
>  			};
>  		};
> +
> +		pwm_f_ao_pins: pwm-f-ao {
> +			mux {
> +				groups = "pwm_f_ao";
> +				function = "pwm_f_ao";
> +			};
> +		};
>  	};
>  };
>  
> @@ -168,6 +175,13 @@
>  				function = "ethernet";
>  			};
>  		};
> +
> +		pwm_e_pins: pwm-e {
> +			mux {
> +				groups = "pwm_e";
> +				function = "pwm_e";
> +			};
> +		};
>  	};
>  };
>  
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>