[PATCH 10/13] ARM: dts: meson: add the hardware random number generator
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sun Jun 11 03:16:41 PDT 2017
All supported Meson SoCs have a random number generator in CBUS.
Newer SoCs (GXBB, GXL and GXM) provide only one 32-bit random number
register, whereas the older SoCs (Meson6, Meson8 and Meson8b) have two
32-bit random number registers. The existing meson-rng driver only
supports the lower 32-bit - but it still works fine on the older SoCs
apart from this small limitation.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
arch/arm/boot/dts/meson.dtsi | 5 +++++
arch/arm/boot/dts/meson8.dtsi | 5 +++++
arch/arm/boot/dts/meson8b.dtsi | 5 +++++
3 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index b05796bee088..a210084398dc 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -78,6 +78,11 @@
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
+ hwrng: rng at 8100 {
+ compatible = "amlogic,meson-rng";
+ reg = <0x8100 0x8>;
+ };
+
uart_A: serial at 84c0 {
compatible = "amlogic,meson-uart";
reg = <0x84c0 0x18>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index cf011dfe050e..a80181ddd416 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -241,6 +241,11 @@
clock-names = "stmmaceth";
};
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
&i2c_AO {
clocks = <&clkc CLKID_CLK81>;
};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 1c09090ff4a5..52aa3f68a6bd 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -171,6 +171,11 @@
};
};
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
&L2 {
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
--
2.13.1
More information about the linux-amlogic
mailing list