[PATCH v2] mmc: meson-gx: work around broken SDIO with certain WiFi chips

[Heiner Kallweit]

There have been reports about SDIO failing with certain WiFi chips in
descriptor chain mode. SD / eMMC are working fine.

So let's fall back to bounce buffer mode for command SD_IO_RW_EXTENDED.
This was reported to fix the error.

Fixes: 79ed05e329c3 "mmc: meson-gx: add support for descriptor chain mode"
Cc: <stable at vger.kernel.org> # 4.12.x
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
v2:
- fixed affected WiFi chip: actually it is AP6255
- added tested-by
---
 drivers/mmc/host/meson-gx-mmc.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 1842ed34..4cdbe3c0 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -210,6 +210,15 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
 	int i;
 	bool use_desc_chain_mode = true;
 
+	/*
+	 * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
+	 * reported. For some strange reason this occurs in descriptor
+	 * chain mode only. So let's fall back to bounce buffer mode
+	 * for command SD_IO_RW_EXTENDED.
+	 */
+	if (mrq->cmd->opcode == SD_IO_RW_EXTENDED)
+		return;
+
 	for_each_sg(data->sg, sg, data->sg_len, i)
 		/* check for 8 byte alignment */
 		if (sg->offset & 7) {
-- 
2.13.0