[PATCH 3/3] ARM: dts: meson8: add and use the real clock controller

Jerome Brunet jbrunet at baylibre.com
Sun Jun 4 13:20:38 PDT 2017


On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote:
> This removes the dummy clk81 gate and replaces it with the actual clock
> controller's CLKID_CLK81. This will also allow us to pass the real clock
> IDs to all devices where the clock is controlled by clkc in the future.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>

This is going in the right direction and at least align meson8 and meson8b.

Acked-by: Jerome Brunet <jbrunet at baylibre.com>

Later on, I'm wondering if some of these clock assignments should be moved to
meson.dtsi ? meson8.dtsi and meson8b.dtsi look very similar 

> ---
>  arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++----------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 6993077331c7..9b0b3ddbb17e 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -43,6 +43,7 @@
>   *     OTHER DEALINGS IN THE SOFTWARE.
>   */
>  
> +#include <dt-bindings/clock/meson8b-clkc.h>
>  #include <dt-bindings/gpio/meson8-gpio.h>
>  /include/ "meson.dtsi"
>  
> @@ -82,13 +83,6 @@
>  			reg = <0x203>;
>  		};
>  	};
> -
> -	clk81: clk at 0 {
> -		#clock-cells = <0>;
> -		compatible = "fixed-clock";
> -		clock-frequency = <141666666>;
> -	};
> -
>  }; /* end of / */
>  
>  &aobus {
> @@ -126,6 +120,12 @@
>  };
>  
>  &cbus {
> +	clkc: clock-controller at 4000 {
> +		#clock-cells = <1>;
> +		compatible = "amlogic,meson8-clkc";
> +		reg = <0x8000 0x4>, <0x4000 0x460>;
> +	};
> +
>  	pinctrl_cbus: pinctrl at 9880 {
>  		compatible = "amlogic,meson8-cbus-pinctrl";
>  		reg = <0x9880 0x10>;
> @@ -172,20 +172,20 @@
>  };
>  
>  &ethmac {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  	clock-names = "stmmaceth";
>  };
>  
>  &i2c_AO {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &i2c_A {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &i2c_B {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &L2 {
> @@ -195,21 +195,21 @@
>  };
>  
>  &spifc {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &uart_AO {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &uart_A {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &uart_B {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };
>  
>  &uart_C {
> -	clocks = <&clk81>;
> +	clocks = <&clkc CLKID_CLK81>;
>  };




More information about the linux-amlogic mailing list