[PATCH v3 0/2] media: Add Amlogic Meson AO CEC Controller support

Hans Verkuil hverkuil at xs4all.nl
Fri Jul 28 05:35:55 PDT 2017


Hi Neil,

On 07/27/2017 05:20 PM, Neil Armstrong wrote:
> The Amlogic SoC embeds a standalone CEC controller, this patch adds a driver
> for such controller.
> The controller does not need HPD to be active, and could support up to max
> 5 logical addresses, but only 1 is handled since the Suspend firmware can
> make use of this unique logical address to wake up the device.
> 
> The Suspend firmware configuration will be added in an other patchset.

Note that to get the right module dependencies you will also need to add
this line:

	select CEC_CORE if CEC_NOTIFIER

to DRM_MESON_DW_HDMI in drivers/gpu/drm/meson/Kconfig.

This ensures that if DRM_MESON_DW_HDMI is 'y' but VIDEO_MESON_AO_CEC is 'm'
the CEC_CORE config is set to 'y'.

Obviously this is a patch for dri-devel.

Regards,

	Hans

> 
> Changes since v2 at [2] :
>  - change meson_ao_cec_read/write prototype to simplify error handling
> 
> Changes since v1 at [1] :
>  - add timeout to wait busy, with error return
>  - handle busy error in all read/write operations
>  - add CEC_CAP_PASSTHROUGH
>  - add bindings ack
> 
> [1] https://lkml.kernel.org/r/1499336870-24118-1-git-send-email-narmstrong@baylibre.com
> [2] https://lkml.kernel.org/r/1499673696-21372-1-git-send-email-narmstrong@baylibre.com
> 
> Neil Armstrong (2):
>   platform: Add Amlogic Meson AO CEC Controller driver
>   dt-bindings: media: Add Amlogic Meson AO-CEC bindings
> 
>  .../devicetree/bindings/media/meson-ao-cec.txt     |  28 +
>  drivers/media/platform/Kconfig                     |  11 +
>  drivers/media/platform/Makefile                    |   2 +
>  drivers/media/platform/meson/Makefile              |   1 +
>  drivers/media/platform/meson/ao-cec.c              | 744 +++++++++++++++++++++
>  5 files changed, 786 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/meson-ao-cec.txt
>  create mode 100644 drivers/media/platform/meson/Makefile
>  create mode 100644 drivers/media/platform/meson/ao-cec.c
> 




More information about the linux-amlogic mailing list