[PATCH v2 2/4] clk: meson: gxbb-aoclk: Switch to regmap for register access
Neil Armstrong
narmstrong at baylibre.com
Fri Jul 28 02:53:07 PDT 2017
Switch the aoclk driver to use the new bindings and switch all the
registers access to regmap only.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/gxbb-aoclk-regmap.c | 46 +++++++++++++++++++++++++++++++++++
drivers/clk/meson/gxbb-aoclk.c | 44 ++++++++++++++++-----------------
drivers/clk/meson/gxbb-aoclk.h | 26 ++++++++++++++++++++
4 files changed, 95 insertions(+), 23 deletions(-)
create mode 100644 drivers/clk/meson/gxbb-aoclk-regmap.c
create mode 100644 drivers/clk/meson/gxbb-aoclk.h
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 83b6d9d..de65427 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,4 +4,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
-obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
+obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
diff --git a/drivers/clk/meson/gxbb-aoclk-regmap.c b/drivers/clk/meson/gxbb-aoclk-regmap.c
new file mode 100644
index 0000000..2515fbf
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk-regmap.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include "gxbb-aoclk.h"
+
+static int aoclk_gate_regmap_enable(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+ return regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(gate->bit_idx), BIT(gate->bit_idx));
+}
+
+static void aoclk_gate_regmap_disable(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+ regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(gate->bit_idx), 0);
+}
+
+static int aoclk_gate_regmap_is_enabled(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(gate->regmap, AO_RTI_GEN_CNTL_REG0, &val);
+ if (ret)
+ return ret;
+
+ return (val & BIT(gate->bit_idx)) != 0;
+}
+
+const struct clk_ops meson_aoclk_gate_regmap_ops = {
+ .enable = aoclk_gate_regmap_enable,
+ .disable = aoclk_gate_regmap_disable,
+ .is_enabled = aoclk_gate_regmap_is_enabled,
+};
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index b45c5fb..f61506c 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -56,16 +56,19 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/init.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
+#include "gxbb-aoclk.h"
static DEFINE_SPINLOCK(gxbb_aoclk_lock);
struct gxbb_aoclk_reset_controller {
struct reset_controller_dev reset;
unsigned int *data;
- void __iomem *base;
+ struct regmap *regmap;
};
static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
@@ -74,9 +77,8 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
struct gxbb_aoclk_reset_controller *reset =
container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
- writel(BIT(reset->data[id]), reset->base);
-
- return 0;
+ return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(reset->data[id]));
}
static const struct reset_control_ops gxbb_aoclk_reset_ops = {
@@ -84,13 +86,12 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
};
#define GXBB_AO_GATE(_name, _bit) \
-static struct clk_gate _name##_ao = { \
- .reg = (void __iomem *)0, \
+static struct aoclk_gate_regmap _name##_ao = { \
.bit_idx = (_bit), \
.lock = &gxbb_aoclk_lock, \
.hw.init = &(struct clk_init_data) { \
.name = #_name "_ao", \
- .ops = &clk_gate_ops, \
+ .ops = &meson_aoclk_gate_regmap_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), \
@@ -113,7 +114,7 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
[RESET_AO_IR_BLASTER] = 23,
};
-static struct clk_gate *gxbb_aoclk_gate[] = {
+static struct aoclk_gate_regmap *gxbb_aoclk_gate[] = {
[CLKID_AO_REMOTE] = &remote_ao,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao,
[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao,
@@ -136,24 +137,23 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
static int gxbb_aoclkc_probe(struct platform_device *pdev)
{
- struct resource *res;
- void __iomem *base;
- int ret, clkid;
- struct device *dev = &pdev->dev;
struct gxbb_aoclk_reset_controller *rstc;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret, clkid;
rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
if (!rstc)
return -ENOMEM;
- /* Generic clocks */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap\n");
+ return -ENODEV;
+ }
/* Reset Controller */
- rstc->base = base;
+ rstc->regmap = regmap;
rstc->data = gxbb_aoclk_reset;
rstc->reset.ops = &gxbb_aoclk_reset_ops;
rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
@@ -161,10 +161,10 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
ret = devm_reset_controller_register(dev, &rstc->reset);
/*
- * Populate base address and register all clks
+ * Populate regmap and register all clks
*/
- for (clkid = 0; clkid < gxbb_aoclk_onecell_data.num; clkid++) {
- gxbb_aoclk_gate[clkid]->reg = base;
+ for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
+ gxbb_aoclk_gate[clkid]->regmap = regmap;
ret = devm_clk_hw_register(dev,
gxbb_aoclk_onecell_data.hws[clkid]);
@@ -177,7 +177,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
}
static const struct of_device_id gxbb_aoclkc_match_table[] = {
- { .compatible = "amlogic,gxbb-aoclkc" },
+ { .compatible = "amlogic,meson-gx-aoclkc" },
{ }
};
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
new file mode 100644
index 0000000..2e26108
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GXBB_AOCLKC_H
+#define __GXBB_AOCLKC_H
+
+/* AO Configuration Clock registers offsets */
+#define AO_RTI_GEN_CNTL_REG0 0x40
+
+struct aoclk_gate_regmap {
+ struct clk_hw hw;
+ unsigned bit_idx;
+ struct regmap *regmap;
+ spinlock_t *lock;
+};
+
+#define to_aoclk_gate_regmap(_hw) \
+ container_of(_hw, struct aoclk_gate_regmap, hw)
+
+extern const struct clk_ops meson_aoclk_gate_regmap_ops;
+
+#endif /* __GXBB_AOCLKC_H */
--
1.9.1
More information about the linux-amlogic
mailing list