[PATCH 2/2] clk: meson: gxbb: fix clk_mclk_i958 divider flags
Jerome Brunet
jbrunet at baylibre.com
Thu Jul 27 06:09:40 PDT 2017
CLK_DIVIDER_ROUND_CLOSEST was incorrectly put in the hw.init flags
while it should have been in the divider flags
Fixes: 3c277c247eab ("clk: meson: gxbb: add cts_mclk_i958")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/clk/meson/gxbb.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index b1b72524153b..59a296b119ea 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -876,7 +876,7 @@ static struct clk_mux gxbb_cts_mclk_i958_sel = {
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
.lock = &clk_lock,
- .hw.init = &(struct clk_init_data){
+ .hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_sel",
.ops = &clk_mux_ops,
.parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" },
@@ -890,12 +890,13 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
.shift = 16,
.width = 8,
.lock = &clk_lock,
- .hw.init = &(struct clk_init_data){
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_div",
.ops = &clk_divider_ops,
.parent_names = (const char *[]){ "cts_mclk_i958_sel" },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_DIVIDER_ROUND_CLOSEST,
+ .flags = CLK_SET_RATE_PARENT,
},
};
--
2.9.4
More information about the linux-amlogic
mailing list