[PATCH v2 2/3] clk: meson: meson8b: register the built-in reset controller

Neil Armstrong narmstrong at baylibre.com
Tue Jul 25 00:58:30 PDT 2017



Le 22/07/2017 20:58, Martin Blumenstingl a écrit :
> The clock controller also includes some reset lines. This patch
> implements a reset controller to assert and de-assert these resets.
> The reset controller itself is registered early (through
> CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot
> process (to start the secondary CPU cores).
> 
> According to the public S805 datasheet there are two more reset bits
> in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by
> this patch (as these seem to be unused in Amlogic's vendor Linux kernel
> sources and their u-boot tree):
> - bit 15: GEN_DIV_SOFT_RESET
> - bit 14: SOFT_RESET
> 
> All information was taken from the public S805 Datasheet and Amlogic's
> vendor GPL kernel sources. This patch is based on an earlier version
> submitted by Carlo Caione.
> 
> Suggested-by: Carlo Caione <carlo at endlessm.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>  drivers/clk/meson/Kconfig   |   1 +
>  drivers/clk/meson/meson8b.c | 159 ++++++++++++++++++++++++++++++++++++++++----
>  drivers/clk/meson/meson8b.h |  25 ++++++-
>  3 files changed, 172 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 5588f75a8414..d2d0174a6eca 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -6,6 +6,7 @@ config COMMON_CLK_AMLOGIC
>  config COMMON_CLK_MESON8B
>  	bool
>  	depends on COMMON_CLK_AMLOGIC
> +	select RESET_CONTROLLER
>  	help
>  	  Support for the clock controller on AmLogic S802 (Meson8),
>  	  S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index bb3f1de876b1..0f853057885c 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -25,6 +25,8 @@
>  #include <linux/clk-provider.h>
>  #include <linux/of_address.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
>  #include <linux/init.h>
>  
>  #include "clkc.h"
> @@ -32,6 +34,13 @@
>  
>  static DEFINE_SPINLOCK(clk_lock);
>  
> +static void __iomem *clk_base;
> +
> +struct meson8b_clk_reset {
> +	struct reset_controller_dev reset;
> +	void __iomem *base;
> +};
> +
>  static const struct pll_rate_table sys_pll_rate_table[] = {
>  	PLL_RATE(312000000, 52, 1, 2),
>  	PLL_RATE(336000000, 56, 1, 2),
> @@ -690,20 +699,114 @@ static struct clk_divider *const meson8b_clk_dividers[] = {
>  	&meson8b_mpeg_clk_div,
>  };
>  
> +static const struct meson8b_clk_reset_line {
> +	u32 reg;
> +	u8 bit_idx;
> +} meson8b_clk_reset_bits[] = {
> +	[RESETID_L2_CACHE_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
> +	},
> +	[RESETID_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
> +	},
> +	[RESETID_SCU_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
> +	},
> +	[RESETID_CPU3_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
> +	},
> +	[RESETID_CPU2_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
> +	},
> +	[RESETID_CPU1_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
> +	},
> +	[RESETID_CPU0_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
> +	},
> +	[RESETID_A5_GLOBAL_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
> +	},
> +	[RESETID_A5_AXI_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
> +	},
> +	[RESETID_A5_ABP_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
> +	},
> +	[RESETID_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
> +		.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
> +	},
> +	[RESETID_VID_CLK_CNTL_SOFT_RESET] = {
> +		.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
> +	},
> +	[RESETID_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
> +		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
> +	},
> +	[RESETID_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
> +		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
> +	},
> +	[RESETID_VID_DIVIDER_CNTL_RESET_N_POST] = {
> +		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
> +	},
> +	[RESETID_VID_DIVIDER_CNTL_RESET_N_PRE] = {
> +		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
> +	},
> +};
> +
> +static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
> +				    unsigned long id, bool assert)
> +{
> +	struct meson8b_clk_reset *meson8b_clk_reset =
> +		container_of(rcdev, struct meson8b_clk_reset, reset);
> +	unsigned long flags;
> +	const struct meson8b_clk_reset_line *reset;
> +	u32 val;
> +
> +	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
> +		return -EINVAL;
> +
> +	reset = &meson8b_clk_reset_bits[id];
> +
> +	spin_lock_irqsave(&clk_lock, flags);
> +
> +	val = readl(meson8b_clk_reset->base + reset->reg);
> +	if (assert)
> +		val |= BIT(reset->bit_idx);
> +	else
> +		val &= ~BIT(reset->bit_idx);
> +	writel(val, meson8b_clk_reset->base + reset->reg);
> +
> +	spin_unlock_irqrestore(&clk_lock, flags);
> +
> +	return 0;
> +}
> +
> +static int meson8b_clk_reset_assert(struct reset_controller_dev *rcdev,
> +				     unsigned long id)
> +{
> +	return meson8b_clk_reset_update(rcdev, id, true);
> +}
> +
> +static int meson8b_clk_reset_deassert(struct reset_controller_dev *rcdev,
> +				       unsigned long id)
> +{
> +	return meson8b_clk_reset_update(rcdev, id, false);
> +}
> +
> +static const struct reset_control_ops meson8b_clk_reset_ops = {
> +	.assert = meson8b_clk_reset_assert,
> +	.deassert = meson8b_clk_reset_deassert,
> +};
> +
>  static int meson8b_clkc_probe(struct platform_device *pdev)
>  {
> -	void __iomem *clk_base;
>  	int ret, clkid, i;
>  	struct clk_hw *parent_hw;
>  	struct clk *parent_clk;
>  	struct device *dev = &pdev->dev;
>  
> -	/*  Generic clocks and PLLs */
> -	clk_base = of_iomap(dev->of_node, 1);
> -	if (!clk_base) {
> -		pr_err("%s: Unable to map clk base\n", __func__);
> +	if (!clk_base)
>  		return -ENXIO;
> -	}
>  
>  	/* Populate base address for PLLs */
>  	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
> @@ -743,7 +846,7 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
>  		/* FIXME convert to devm_clk_register */
>  		ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[clkid]);
>  		if (ret)
> -			goto iounmap;
> +			return ret;
>  	}
>  
>  	/*
> @@ -766,15 +869,11 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
>  	if (ret) {
>  		pr_err("%s: failed to register clock notifier for cpu_clk\n",
>  				__func__);
> -		goto iounmap;
> +		return ret;
>  	}
>  
>  	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
>  			&meson8b_hw_onecell_data);
> -
> -iounmap:
> -	iounmap(clk_base);
> -	return ret;
>  }
>  
>  static const struct of_device_id meson8b_clkc_match_table[] = {
> @@ -793,3 +892,39 @@ static struct platform_driver meson8b_driver = {
>  };
>  
>  builtin_platform_driver(meson8b_driver);
> +
> +static void __init meson8b_clkc_reset_init(struct device_node *np)
> +{
> +	struct meson8b_clk_reset *rstc;
> +	int ret;
> +
> +	/* Generic clocks, PLLs and some of the reset-bits */
> +	clk_base = of_iomap(np, 1);
> +	if (!clk_base) {
> +		pr_err("%s: Unable to map clk base\n", __func__);
> +		return;
> +	}
> +
> +	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
> +	if (!rstc)
> +		return;
> +
> +	/* Reset Controller */
> +	rstc->base = clk_base;
> +	rstc->reset.ops = &meson8b_clk_reset_ops;
> +	rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
> +	rstc->reset.of_node = np;
> +	ret = reset_controller_register(&rstc->reset);
> +	if (ret) {
> +		pr_err("%s: Failed to register clkc reset controller: %d\n",
> +		       __func__, ret);
> +		return;
> +	}
> +}
> +
> +CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
> +		      meson8b_clkc_reset_init);
> +CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
> +		      meson8b_clkc_reset_init);
> +CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
> +		      meson8b_clkc_reset_init);
> diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
> index a687e02547dc..5f4d8e49dd4d 100644
> --- a/drivers/clk/meson/meson8b.h
> +++ b/drivers/clk/meson/meson8b.h
> @@ -37,6 +37,9 @@
>  #define HHI_GCLK_AO			0x154 /* 0x55 offset in data sheet */
>  #define HHI_SYS_CPU_CLK_CNTL1		0x15c /* 0x57 offset in data sheet */
>  #define HHI_MPEG_CLK_CNTL		0x174 /* 0x5d offset in data sheet */
> +#define HHI_VID_CLK_CNTL		0x17c /* 0x5f offset in data sheet */
> +#define HHI_VID_DIVIDER_CNTL		0x198 /* 0x66 offset in data sheet */
> +#define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
>  #define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
>  #define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
>  #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
> @@ -163,7 +166,27 @@
>  
>  #define CLK_NR_CLKS		96
>  
> -/* include the CLKIDs that have been made part of the stable DT binding */
> +#define RESETID_L2_CACHE_SOFT_RESET				0
> +#define RESETID_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET		1
> +#define RESETID_SCU_SOFT_RESET					2
> +#define RESETID_CPU0_SOFT_RESET					3
> +#define RESETID_CPU1_SOFT_RESET					4
> +#define RESETID_CPU2_SOFT_RESET					5
> +#define RESETID_CPU3_SOFT_RESET					6
> +#define RESETID_A5_GLOBAL_RESET					7
> +#define RESETID_A5_AXI_SOFT_RESET				8
> +#define RESETID_A5_ABP_SOFT_RESET				9
> +#define RESETID_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET		10
> +#define RESETID_VID_CLK_CNTL_SOFT_RESET				11
> +#define RESETID_VID_DIVIDER_CNTL_SOFT_RESET_POST		12
> +#define RESETID_VID_DIVIDER_CNTL_SOFT_RESET_PRE			13
> +#define RESETID_VID_DIVIDER_CNTL_RESET_N_POST			14
> +#define RESETID_VID_DIVIDER_CNTL_RESET_N_PRE			15

I think you should directly expose them in a dt-bindings/reset/meson8b-clkc-reset.h file and include it here.

> +
> +/*
> + * include the CLKID and RESETID that have
> + * been made part of the stable DT binding
> + */
>  #include <dt-bindings/clock/meson8b-clkc.h>
>  
>  #endif /* __MESON8B_H */
> 

Apart from that :
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>



More information about the linux-amlogic mailing list